Can the Adaptor with BSP/BSPT male thread, galvanized steel, ADN type handle 25 bar in high-temperature environments?

Adaptor with BSP/BSPT male thread, galvanized steel, ADN type — can it be used in high-temperature environments? Yes, but with limitations. The ADN adaptor's galvanized steel construction provides good mechanical strength and corrosion resistance, and its 25 bar working pressure rating applies under standard temperature conditions. Galvanized zinc coatings, however, have reduced performance at elevated temperatures: prolonged exposure above ~200°C can cause coating degradation, accelerated corrosion, and potential loss of sealing integrity. Additionally, the sealing methods described — flat face sealing for BSP and PTFE tape for BSPT — have temperature limits: common PTFE tape remains stable to about 260°C, but flange gasket materials (if any) and the overall assembly may limit safe operation at high temperatures. Recommendation: For continuous or frequent high-temperature service (above ~150–200°C), verify the maximum allowable temperature from the manufacturer or choose an adaptor and sealing materials specifically rated for high temperatures (e.g., stainless steel body, high-temperature gasket materials). For occasional short exposures below ~150–200°C, the ADN galvanized adaptor will generally perform acceptably while maintaining its 25 bar rating, but manufacturer confirmation is advised.

Does the Adaptor with BSP/BSPT male thread, galvanized steel, ADN type support use with hydraulic fluids and chemical reagents?

Adaptor with BSP/BSPT male thread, galvanized steel, ADN type: Generally suitable for use with many hydraulic fluids and some chemical reagents, but compatibility depends on the specific fluid/chemical. The adaptor’s galvanized steel construction offers good corrosion resistance and mechanical strength for typical hydraulic oils and many industrial reagents, and its sealing methods (flat face for BSP, PTFE tape for BSPT) provide secure, leak-free joints up to 25 bar. However, galvanized steel can be attacked by strong acids, alkalis, chlorinated solvents, and certain aggressive chemicals (e.g., concentrated sulfuric or hydrochloric acids, sodium hypochlorite, some amines), and PTFE tape may not seal all aggressive media reliably. Before use, verify chemical compatibility of galvanized steel and sealing materials with the exact hydraulic fluid or reagent (consult material-compatibility charts or supplier data). If incompatibility is suspected, consider alternative materials (stainless steel, brass, or suitable coatings) and appropriate seals.

Adaptor with BSP/BSPT male thread, galvanized steel, ADN type

All products, Threaded couplings and adapters/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	20, 25

The hexagonal adaptor ADN with external BSP and BSPT threads is a reliable solution for connecting pipes, hoses with fittings, and diverse components within industrial installations. Manufactured from durable galvanized steel, it ensures long-lasting resistance to wear, corrosion, and demanding working conditions. Depending on the size and brand, the adaptor features different flange shapes designed for easy tightening with a wrench, providing flexibility and convenience during assembly. Its sealing system guarantees secure and leak-free connections: flat face sealing for BSP threads and thread sealing with Teflon tape for BSPT threads. With a working pressure capacity of up to 25 bar, this adaptor delivers consistent performance in a wide range of industrial applications, making it an essential element for professionals seeking efficiency, safety, and durability in their piping systems.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TI-ADN-01-050-050	Adapter GZ BSP 1/2", galvanized steel.	-	25
TI-ADN-01-075-075	GZ BSP 3/4" adapter, galvanized steel.	-	25
TI-ADN-01-100-100	Adaptor GZ BSP 1", A10X	-	25
TI-ADN-01-125-125	Adaptor GZ BSP 1.1/4", galvanized steel.	-	25
TI-ADN-01-150-150	Adaptor GZ BSP 1.1/2", galvanized steel.	-	25
TI-ADN-01-200-200	GZ BSP 2" adapter, galvanized steel.	-	25
TI-ADN-01-250-250	Adaptor GZ BSP 2.1/2", galvanized steel.	-	25
TI-ADN-01-300-300	GZ BSP 3" adapter, galvanized steel.	-	25
TI-ADN-01-400-400	GZ BSP 4" adapter, galvanized steel.	-	25
TI-ADN-02-050-050	Adapter GZ BSPT 1/2" / GZ BSP 1/2", galvanized steel.	-	25
TI-ADN-02-075-075	Adapter GZ BSPT 3/4" / GZ BSP 3/4", galvanized steel.	-	25
TI-ADN-02-100-100	Adapter GZ BSPT 1" / GZ BSP 1", galvanized steel.	-	25
TI-ADN-02-125-125	Adapter GZ BSPT 1.1/4" / GZ BSP 1.1/4", galvanized steel.	-	25
TI-ADN-02-150-150	Adapter GZ BSPT 1.1/2" / GZ BSP 1.1/2", galvanized steel.	-	25
TI-ADN-02-200-200	Adapter GZ BSPT 2" / GZ BSP 2", galvanized steel.	-	25
TI-ADN-02-250-250	Adaptor GZ BSPT 2.1/2" / GZ BSP 2.1/2", S355 galvanized	-	25
TI-ADN-02-300-300	Adapter GZ BSPT 3" / GZ BSP 3", galvanized steel.	-	25
TI-ADN-02-400-400	Adaptor GZ BSPT 4" / GZ BSP 4", galvanized steel.	-	25

The hexagonal adaptor ADN with external BSP and BSPT threads is a reliable solution for connecting pipes, hoses with fittings, and diverse components within industrial installations. Manufactured from durable galvanized steel, it ensures long-lasting resistance to wear, corrosion, and demanding working conditions. Depending on the size and brand, the adaptor features different flange shapes designed for easy tightening with a wrench, providing flexibility and convenience during assembly. Its sealing system guarantees secure and leak-free connections: flat face sealing for BSP threads and thread sealing with Teflon tape for BSPT threads. With a working pressure capacity of up to 25 bar, this adaptor delivers consistent performance in a wide range of industrial applications, making it an essential element for professionals seeking efficiency, safety, and durability in their piping systems.