Can the Stainless Steel Crimp Sleeve for Low-Pressure Hoses, Type H be crimped onto steel-braided (PZ-type) hoses and still maintain a leak-free connection up to 30 bar?

Yes. The Stainless Steel Crimp Sleeve for Low-Pressure Hoses, Type H can be crimped onto steel-braided (PZ-type) hoses and still maintain a leak-free connection up to approximately 30 bar, provided a few conditions are met: - The sleeve’s internal diameter (D2) must be properly matched to the hose’s external diameter for a secure crimp grip. - The front hole diameter (D3) must match the chosen end fitting to ensure sealing and mechanical integrity. - Crimping must be performed correctly using suitable tooling and parameters for steel-braided hoses to avoid damage to the braid or hose core. - Note that the “up to ~30 bar” rating depends on hose diameter and assembly quality; confirm against specific hose and fitting specifications and perform pressure testing after assembly. Manufactured from AISI 304 stainless steel, the sleeve provides corrosion resistance and durability suitable for professional hose assemblies in such applications.

Does the Stainless Steel Crimp Sleeve for Low-Pressure Hoses, Type H require a special crimping tool or procedure when used with steel-braided (PZ-type) hoses?

Stainless Steel Crimp Sleeve for Low-Pressure Hoses, Type H does not inherently require a special crimping tool or procedure for use with steel-braided (PZ-type) hoses, but certain considerations apply. The sleeve is designed to allow crimping of hoses with steel braiding, expanding its usability; however, to achieve a secure, reliable connection you should: - Use a crimping tool capable of compressing AISI 304 stainless steel sleeve material to the necessary diameter without slipping or deforming the sleeve unevenly (hydraulic or mechanical crimpers with appropriate die sets are recommended). - Match the internal sleeve diameter (D2) precisely to the hose outer diameter and ensure the front hole diameter (D3) fits the chosen end fitting. - Follow a controlled, even crimping sequence to fully compress braid and sleeve, preventing damage to the braid or hose core. - Inspect the crimp for uniform compression and secure seating of the braid; rework or replace if irregular. In summary, while no uniquely proprietary tool is mandated, using proper crimping equipment and correct sizing/procedure is essential when crimping Stainless Steel Crimp Sleeve for Low-Pressure Hoses, Type H onto steel-braided (PZ-type) hoses for durable, leak-free assemblies.

Stainless Steel Crimp Sleeve for Low-Pressure Hoses, Type H

All products, Low-pressure fittings and adapters/

Additional information

Material	SS – stainless steel

The H-type clamp sleeve is a reliable solution for securing hose ends that do not feature a built-in locking mechanism, ensuring a firm and durable connection. Designed for versatility, it is compatible with NiTO ends as well as quick-connect fittings, making it suitable for a wide range of applications. Ideal for low-pressure hoses up to approximately 30 bar, depending on the diameter, it works effectively with hoses made from soft materials such as rubber with textile reinforcement or PVC. Additionally, it offers the option of crimping hoses with steel braiding, such as PZ-type hoses, expanding its usability in more demanding environments. For optimal performance, the internal diameter of the sleeve (D2) should be carefully matched to the external diameter of the hose, while the hole diameter at the front (D3) must correspond precisely to the chosen end fitting. Manufactured from high-quality AISI 304 stainless steel, the clamp sleeve guarantees excellent resistance to corrosion, long service life, and dependable performance even in challenging conditions, making it a practical and durable choice for professional hose assembly solutions.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
EC-104260	Sleeve H 6/11, AISI 304	10	-
EC-104262	Sleeve H 6/12, AISI 304	12	-
EC-104278	Sleeve H 8/12.5, AISI 304	12	-
EC-104280	Sleeve H 8/13.5, AISI 304	14	-
EC-104284	Sleeve H 8/14, AISI 304	14	-
EC-104300	Sleeve H 10/16, AISI 304	16	-
EC-104305	Sleeve H 10/15, AISI 304	16	-
EC-104307	Sleeve H 10/17, AISI 304	16	-
EC-104312	Sleeve H 12/19, AISI 304	20	-
EC-104318	Sleeve H 12/18, AISI 304	18	-
EC-104319	Sleeve H 12/22, AISI 304	22	-
EC-104323	Sleeve H 15/23, AISI 304	22	-
EC-104327	Sleeve H 20/29, AISI 304	28	-

The H-type clamp sleeve is a reliable solution for securing hose ends that do not feature a built-in locking mechanism, ensuring a firm and durable connection. Designed for versatility, it is compatible with NiTO ends as well as quick-connect fittings, making it suitable for a wide range of applications. Ideal for low-pressure hoses up to approximately 30 bar, depending on the diameter, it works effectively with hoses made from soft materials such as rubber with textile reinforcement or PVC. Additionally, it offers the option of crimping hoses with steel braiding, such as PZ-type hoses, expanding its usability in more demanding environments. For optimal performance, the internal diameter of the sleeve (D2) should be carefully matched to the external diameter of the hose, while the hole diameter at the front (D3) must correspond precisely to the chosen end fitting. Manufactured from high-quality AISI 304 stainless steel, the clamp sleeve guarantees excellent resistance to corrosion, long service life, and dependable performance even in challenging conditions, making it a practical and durable choice for professional hose assembly solutions.