Is the Double Base Plate for DIN 3015 Heavy-Duty Clamp available in both carbon steel and AISI 316L stainless steel?

Yes. The Double Base Plate for DIN 3015 Heavy-Duty Clamp is available in both carbon steel and corrosion-resistant AISI 316L stainless steel. Manufactured from either material, it delivers the strength, durability and stability required for heavy-duty clamp installations, with the stainless option offering superior resistance to corrosive environments.

What mounting methods are recommended for the Double Base Plate for DIN 3015 Heavy-Duty Clamp to ensure optimal load distribution?

Recommended mounting methods for the Double Base Plate for DIN 3015 Heavy-Duty Clamp to ensure optimal load distribution: - Full-surface bolting to a flat, rigid substrate: Use multiple high-strength bolts arranged to cover the plate’s footprint, ensuring even clamping force across the entire base to prevent point loads and reduce stress concentrations. - Use of dowel pins or locating studs: Pair bolts with precision dowels or studs to fix the plate position and transfer shear loads directly into the supporting structure, improving alignment and load sharing. - Welded perimeter plus bolting (where applicable): For permanent installations, weld the plate perimeter to the supporting structure and also bolt through the plate to combine weld strength with mechanical fastening, distributing loads and increasing fatigue resistance. - Reinforced backing or stiffener plates: On thin or composite supports, install a backing plate or stiffener under the Double Base Plate for DIN 3015 Heavy-Duty Clamp to enlarge bearing area and reduce substrate deformation. - Use of load-distributing washers or plates: Under bolt heads or nuts, fit hardened, large-diameter washers or dedicated load-spreading plates to minimize bearing pressure and prevent embedment. - Corrosion-protected fasteners and proper torqueing: Select compatible, corrosion-resistant fasteners (e.g., AISI 316L where applicable) and apply specified torque with torque-control tools to achieve uniform preload and avoid uneven load sharing. Follow manufacturer mounting pattern, hole spacing, and torque specifications to ensure the Double Base Plate for DIN 3015 Heavy-Duty Clamp achieves optimal load distribution and long-term reliability.

Plate bottom double for clamp DIN 3015 heavy

All products, Clamps for hydraulic pipes/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	2

Plate bottom double for welding for mounting clamp DIN 3015 heavy type 201. Material: steel carbon or steel AISI 316L.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-APINPD-1	Bottom plate double clamp heavy. group 1	-	-	In stock	Enquiry
TC-APINPD-1-SS	Bottom plate double clamp heavy. group 1, AISI 316L	-	-	In stock	Enquiry
TC-APINPD-2	Bottom plate double clamp heavy. group 2	-	-	In stock	Enquiry
TC-APINPD-2-SS	Bottom plate double clamp heavy. group 2, AISI 316L	-	-	In stock	Enquiry
TC-APINPD-3	Bottom plate double clamp heavy. group 3	-	-	In stock	Enquiry
TC-APINPD-3-SS	Bottom plate double clamp heavy. group 3, AISI 316L	-	-	In stock	Enquiry
TC-APINPD-4	Bottom plate double clamp heavy. group 4	-	-	In stock	Enquiry
TC-APINPD-4-SS	Bottom plate double clamp heavy. group 4, AISI 316L	-	-	In stock	Enquiry
TC-APINPD-5	Bottom plate double clamp heavy. group 5	-	-	In stock	Enquiry
TC-APINPD-5-SS	Bottom plate double clamp heavy. group 5, AISI 316L	-	-	In stock	Enquiry