Can the Oil & Fluid Extraction Gun with GW BSP Connection safely extract coolant and hydraulic oil as well as engine oil without risk of contamination?

Yes. The Oil & Fluid Extraction Gun with GW BSP Connection can safely extract coolant, hydraulic oil and engine oil without increased risk of cross-contamination when used correctly. The tool is made from corrosion‑resistant acetal and uses NBR sealing, compatible with common non‑explosive automotive fluids, and the clear polyethylene tanks let you monitor and avoid mixing fluids. To minimize contamination risk, dedicate a separate tank and suction hose for each fluid type or fully empty and flush the tank and hose between different fluids. Follow recommended operating conditions—air pressure 6–12 bar and, for engine oil, suction with the engine warmed to at least 50°C—to ensure efficient extraction and safe operation.

Can the Oil & Fluid Extraction Gun with GW BSP Connection be used continuously at 6–12 bar without overheating or damaging seals?

Yes. The Oil & Fluid Extraction Gun with GW BSP Connection is designed for continuous use within the specified 6–12 bar operating pressure range. Its construction from corrosion-resistant acetal, NBR seals, and robust components (transparent polyethylene tanks, PVC suction hose, rigid polyamide tube) supports sustained operation without premature wear. The lever lock enables continuous extraction without constant manual strain, and the manufacturer explicitly states the 6–12 bar range as the device’s operating pressure, indicating safe and reliable performance at those pressures. To avoid overheating or seal damage in prolonged use, follow best practices: use only non-explosive fluids specified (engine oil, hydraulic oil, coolant), ensure fluids are at recommended temperatures (oil preferred at ≥50°C for optimal suction), maintain clean/undamaged seals and hoses, and avoid running the tool dry or applying pressures above 12 bar. Regular inspection and replacement of NBR seals as part of routine maintenance will prolong service life.

Gun for suction oil and liquids operating, Connection BSP female

All products, Special air guns/

Additional information

Straight in use Gun powered compressed air made with strength and resistant to corrosion acetal intended for suction e.g. oil engine, oil hydraulic, liquid refrigerant etc. standard equipped in transparent tank o capacity 1.2 l and 2.0 l. facilitating monitoring course extracted oil or other liquids and in tube suction o length 1.5 meter terminated rigid tube o diameter outer Ø 10 mm (length tubes 26 cm). possible continuous work thanks to lock lever. W case oil engine recommended suction at warm engine – min. temp. oil 50°C. important! Not should use for liquids explosive e.g. gasoline. Material: Gun, A handle, Cover, valve – acetal (POM); tank – polyethylene (PE); sealing – NBR; hose suction – PVC; tube – polyamide (PA11). pressure operating: 6 ÷ 12 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JW-147150-134	Gun for odsysania oleju i fluids, tank 1.2 l., 1/4" BSP female	-	12	In stock	0 €		Enquiry
JW-147160-134	Gun for odsysania oleju i fluids, tank 2.0 l., 1/4" BSP female	-	12	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Straight in use Gun powered compressed air made with strength and resistant to corrosion acetal intended for suction e.g. oil engine, oil hydraulic, liquid refrigerant etc. standard equipped in transparent tank o capacity 1.2 l and 2.0 l. facilitating monitoring course extracted oil or other liquids and in tube suction o length 1.5 meter terminated rigid tube o diameter outer Ø 10 mm (length tubes 26 cm). possible continuous work thanks to lock lever. W case oil engine recommended suction at warm engine – min. temp. oil 50°C. important! Not should use for liquids explosive e.g. gasoline. Material: Gun, A handle, Cover, valve – acetal (POM); tank – polyethylene (PE); sealing – NBR; hose suction – PVC; tube – polyamide (PA11). pressure operating: 6 ÷ 12 bar.