Is the WEO Plug with Hose End, Hardened Steel, 710 Series suitable for continuous use at temperatures between -30°C and +100°C?

Yes. The WEO Plug with Hose End, Hardened Steel, 710 Series is suitable for continuous use at temperatures between -30°C and +100°C. Its specified operating temperature range of -30°C to +100°C ensures reliable performance and material integrity throughout that span, making it appropriate for continuous operation in environments within those limits.

Can the WEO Plug with Hose End, Hardened Steel, 710 Series be used with hydraulic fluids other than mineral oil without compromising performance?

The WEO Plug with Hose End, Hardened Steel, 710 Series is specified for use with common hydraulic hose types (1SN, 2SN, 1SC, 2SC), high working pressures (up to 350 bar for hoses to 3/4" and 250 bar for 1"), and an operating temperature range of –30°C to +100°C. Its construction from hardened steel gives excellent mechanical durability and resistance to wear. However, compatibility with hydraulic fluids other than mineral oil depends on the materials used for seals and internal components (typically elastomers such as NBR, FKM, EPDM, etc.), which determine chemical resistance. The product description does not state seal materials or fluid compatibility, so you cannot guarantee performance or seal life with non-mineral fluids (e.g., phosphate esters, water-glycol, synthetic esters) based solely on the provided information. Recommendation: consult the manufacturer’s datasheet or technical service for confirmed seal materials and a fluid-compatibility chart. If seals rated for the specific hydraulic fluid are used, the WEO Plug with Hose End, Hardened Steel, 710 Series should maintain performance; without that confirmation, using non-mineral fluids risks premature seal failure and compromised performance.

WEO Plug with Hose End, Hardened Steel, 710 Series

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

The WEO plug with hose end is a compact and highly efficient solution for hydraulic systems where limited space makes traditional hose installation difficult. Its innovative design allows the plug to move freely within the socket once connected, eliminating the risk of hose twisting and ensuring a secure, reliable fit. Engineered for use with hose types 1SN, 2SN, 1SC, and 2SC, it delivers outstanding performance under demanding conditions, with a working pressure of up to 350 bar for hoses up to 3/4″ and 250 bar for 1″ hoses. Manufactured from hardened steel, the plug guarantees durability, strength, and long service life even in intensive applications. With an operating temperature range from -30°C to +100°C, it is perfectly suited for a wide variety of industrial environments, offering flexibility, safety, and efficiency. This solution not only simplifies installation but also enhances system reliability, making it an ideal choice for professionals seeking robust and space-saving hydraulic connections.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CJ-H-147100403	End fitting WEO 1/4", hose 3/16", 350 bar	5	350	In stock	Enquiry
CJ-H-147100404	End fitting WEO 1/4", hose 1/4", 350 bar	6	350	In stock	Enquiry
CJ-H-147100604	End fitting WEO 3/8", hose 1/4", 350 bar	6	350	In stock	Enquiry
CJ-H-147100605	End fitting WEO 3/8", hose 5/16", 350 bar	8	350	In stock	Enquiry
CJ-H-147100606	End fitting WEO 3/8", hose 3/8", 350 bar	10	350	In stock	Enquiry
CJ-H-147100806	End fitting WEO 1/2", hose 3/8", 350 bar	10	350	In stock	Enquiry
CJ-H-147100808	End fitting WEO 1/2", hose 1/2", 350 bar	12	350	In stock	Enquiry
CJ-H-147100810	End fitting WEO 1/2", hose 5/8", 350 bar	16	350	In stock	Enquiry
CJ-H-147101208	End fitting WEO 3/4", hose 1/2", 350 bar	12	350	In stock	Enquiry
CJ-H-147101210	End fitting WEO 3/4", hose 5/8", 350 bar	16	350	In stock	Enquiry
CJ-H-147101212	End fitting WEO 3/4", hose 3/4", 350 bar	20	350	In stock	Enquiry
CJ-H-147101616	End fitting WEO 1", hose 1", 250 bar	25	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The WEO plug with hose end is a compact and highly efficient solution for hydraulic systems where limited space makes traditional hose installation difficult. Its innovative design allows the plug to move freely within the socket once connected, eliminating the risk of hose twisting and ensuring a secure, reliable fit. Engineered for use with hose types 1SN, 2SN, 1SC, and 2SC, it delivers outstanding performance under demanding conditions, with a working pressure of up to 350 bar for hoses up to 3/4″ and 250 bar for 1″ hoses. Manufactured from hardened steel, the plug guarantees durability, strength, and long service life even in intensive applications. With an operating temperature range from -30°C to +100°C, it is perfectly suited for a wide variety of industrial environments, offering flexibility, safety, and efficiency. This solution not only simplifies installation but also enhances system reliability, making it an ideal choice for professionals seeking robust and space-saving hydraulic connections.