Is the CEJN 116 Quick Connect Socket with Female Thread & Valve, Hardened Steel compatible with standard hydraulic hoses and fittings rated to 1500 bar?

Yes. The CEJN 116 Quick Connect Socket with Female Thread & Valve, Hardened Steel is compatible with standard hydraulic hoses and fittings rated to 1500 bar, provided the mating hose/fitting has compatible thread size and nominal diameter. The socket is engineered for extremely high-pressure hydraulic systems, rated for a working pressure up to 1500 bar and a burst pressure of 3000 bar, manufactured from hardened galvanized steel with NBR seals for leak-free operation. Ensure the hose/fitting matches the socket’s nominal diameter (2.5 mm), thread type, and sealing requirements; also verify operating temperature range (-30°C to +100°C) and, if needed, use the optional safety ring to prevent accidental disconnection.

Can the CEJN 116 Quick Connect Socket with Female Thread & Valve, Hardened Steel be used with hydraulic systems operating below -30°C or above +100°C without affecting performance?

No. The CEJN 116 Quick Connect Socket with Female Thread & Valve, Hardened Steel is specified for an operating temperature range of -30°C to +100°C. Using it below -30°C or above +100°C can affect the NBR seals and other materials, risking reduced sealing performance, increased wear, stiffness or embrittlement, leakage, or premature failure. For reliable performance outside the specified range, consult CEJN for alternative couplings or suitable seal materials rated for those temperatures.

Socket quick coupling CEJN 116 with female thread with valve, hardened steel

All products, UHP quick couplings/

Additional information

Material	CS – steel (cast iron)

Socket quick coupling CEJN 116 with thread internal and with valve intended for installation hydraulic o very high pressures. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. optionally socket can be equipped in ring securing against accidental disconnection. supplied standard with a cap in order to protection against contaminants. Material: hardened steel, galvanized. sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Diameter nominal: 2.5 mm. Working pressure: 1500 bar (coupling connected). pressure bursting: 3000 bar. Operating temperature: od -30°C up to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CJ-HP-101161201	Socket CEJN 116 1/8" BSP female	-	1500	In stock	Enquiry
CJ-HP-101161202	Socket CEJN 116 1/4" BSP female	-	1500	In stock	Enquiry
CJ-HP-101161402	Socket CEJN 116 1/4" NPT female	-	1500	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Socket quick coupling CEJN 116 with thread internal and with valve intended for installation hydraulic o very high pressures. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. optionally socket can be equipped in ring securing against accidental disconnection. supplied standard with a cap in order to protection against contaminants. Material: hardened steel, galvanized. sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Diameter nominal: 2.5 mm. Working pressure: 1500 bar (coupling connected). pressure bursting: 3000 bar. Operating temperature: od -30°C up to +100°C.