Can the CEJN 115 Quick Connect Socket with Valve, GW, Hardened Steel handle continuous use at 1000 bar without accelerated wear?

Yes. The CEJN 115 Quick Connect Socket with Valve, GW, Hardened Steel is designed for continuous operation at a working pressure of 1000 bar and is engineered to resist accelerated wear under such conditions. Key factors supporting continual use at 1000 bar: - Material and treatment: Manufactured from hardened, galvanized steel for exceptional durability and wear resistance in high-pressure environments. - Sealing: NBR seals provide reliable, leak-free performance that reduces wear from fluid loss and contamination. - Safety margins: Rated for a working pressure of 1000 bar and tested up to a 2600 bar burst pressure, indicating robust safety and structural integrity well above normal operating pressure. - Contamination protection: Standard protective cap and optional locking ring minimize contamination and accidental disconnection, both of which extend service life and reduce wear. - Temperature range: Operable from -30°C to +100°C, ensuring stable material and seal performance across common service temperatures. Proper maintenance, correct installation, use within specified temperature and fluid compatibility limits, and avoidance of pressure spikes beyond the rated working pressure are required to prevent premature wear. When used and maintained according to specifications, the CEJN 115 Quick Connect Socket with Valve, GW, Hardened Steel can handle continuous use at 1000 bar without accelerated wear.

Does the CEJN 115 Quick Connect Socket with Valve, GW, Hardened Steel require a specific maintenance schedule when used frequently at temperatures near +100°C?

The CEJN 115 Quick Connect Socket with Valve, GW, Hardened Steel does not inherently require a special maintenance schedule beyond standard good-practice checks, but frequent use at temperatures near +100°C calls for more attentive inspection and preventive care. Recommended actions: - Inspect seals regularly: NBR seals are rated to +100°C; check for hardening, cracking or extrusion after heavy use and replace seals immediately if any degradation is detected. - Monitor for wear and corrosion: hardened, galvanized steel resists wear, but elevated temperatures and frequent cycles can accelerate surface wear—inspect mating faces, valve components and threads for damage. - Check valve operation and leak tightness: perform functional checks and pressure/leak tests periodically to ensure reliable sealing under working pressure. - Maintain cleanliness: keep the protective cap in place when uncoupled and clean contamination from ports to avoid accelerated seal wear. - Lubrication and torque: follow manufacturer torque and lubrication recommendations if provided; avoid contaminants and inappropriate lubricants that could damage NBR seals. - Increase inspection frequency: under near-maximum temperature and heavy duty use, shorten inspection intervals compared with normal-duty schedules (e.g., from monthly to weekly or per-shift depending on severity and criticality). If service intervals or maintenance procedures are critical for your application, consult CEJN or the product documentation for specific replacement intervals and approved materials.

CEJN 115 Quick Connect Socket with Valve, GW, Hardened Steel

All products, UHP quick couplings/

Additional information

Material	CS – steel (cast iron)

The CEJN 115 quick coupling socket with internal thread and integrated valve is a highly reliable solution for hydraulic systems operating under extreme pressure conditions. Engineered for demanding applications such as hydraulic presses, lifting devices, rescue tools, cutters, and other high-performance equipment, it ensures secure and efficient connections even in the most challenging environments. Manufactured from hardened, galvanized steel, the socket offers exceptional durability and resistance to wear, while the NBR sealing guarantees leak-free performance. With a nominal diameter of 2.5 mm and a flow rate of 6 l/min at Δp = 4 bar, it delivers precise hydraulic control. Designed for a working pressure of 1000 bar and tested to withstand burst pressures up to 2600 bar, it provides maximum safety and reliability. The operating temperature range from -30°C to +100°C makes it suitable for diverse conditions, ensuring consistent performance in both low and high temperatures. For enhanced safety, the socket can be optionally equipped with a locking ring to prevent accidental disconnection, while the standard protective cap safeguards against contamination, extending the service life of the coupling. This combination of strength, precision, and safety makes the CEJN 115 socket an indispensable component for professionals who demand uncompromising quality in hydraulic applications.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CJ-HP-101151102	CEJN 115 GW 1/4" BSPT socket	-	1000	In stock	Enquiry
CJ-HP-101151104	CEJN 115 GW 3/8" BSPT socket	-	1000	In stock	Enquiry
CJ-HP-101151201	CEJN 115 GW 1/8" BSP socket	-	1000	In stock	Enquiry
CJ-HP-101151202	CEJN 115 GW 1/4" BSP socket	-	1000	In stock	Enquiry
CJ-HP-101151204	CEJN 115 GW 3/8" BSP socket	-	1000	In stock	Enquiry
CJ-HP-101151401	CEJN 115 GW 1/8" NPT socket	-	1000	In stock	Enquiry
CJ-HP-101151402	CEJN 115 GW 1/4" NPT socket	-	1000	In stock	Enquiry
CJ-HP-101151404	CEJN 115 GW 3/8" NPT socket	-	1000	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The CEJN 115 quick coupling socket with internal thread and integrated valve is a highly reliable solution for hydraulic systems operating under extreme pressure conditions. Engineered for demanding applications such as hydraulic presses, lifting devices, rescue tools, cutters, and other high-performance equipment, it ensures secure and efficient connections even in the most challenging environments. Manufactured from hardened, galvanized steel, the socket offers exceptional durability and resistance to wear, while the NBR sealing guarantees leak-free performance. With a nominal diameter of 2.5 mm and a flow rate of 6 l/min at Δp = 4 bar, it delivers precise hydraulic control. Designed for a working pressure of 1000 bar and tested to withstand burst pressures up to 2600 bar, it provides maximum safety and reliability. The operating temperature range from -30°C to +100°C makes it suitable for diverse conditions, ensuring consistent performance in both low and high temperatures. For enhanced safety, the socket can be optionally equipped with a locking ring to prevent accidental disconnection, while the standard protective cap safeguards against contamination, extending the service life of the coupling. This combination of strength, precision, and safety makes the CEJN 115 socket an indispensable component for professionals who demand uncompromising quality in hydraulic applications.