Hose for conveying cement, sand, gravel VOLGA FRA-ABR®
Very strong, thick hose suction – delivery intended for conveying wide range wet and dry substances abrasive. thick Layer inner smooth, antistatic, resistant to abrasion (70 mm 3 acc. to ISO 4649, formerly DIN 53516). A built-in copper wire which, after earthing (or connection to an earthed end), discharges electric charges. Layer outer corrugated, resistant to conditions atmospheric and ozone. hose intended is for conveying substances abrasive mixed with water and dry: cement, sand, gravel, seeds etc. appropriate for use in heavy conditions – „Heavy Duty”. can be bent on relatively small radius bends, whereas its bending requires considerable force. can be also easily cut on sections directly on space use and mounted of special fittings flanged PN10 (fitted on external surface hose). used in many use, e.g. for handling substances bulk in ports, for transport cuttings in mining, in industry chemical, in construction at works demolition, for suction and conveying water and sludge in works at dewatering, in gravel pits and sand plants, in works dredging and dredging. assembly: hose intended for mounting system VOLGA FRA – aluminum half-flanges PN10 applied externally on hose. Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +70°C.
List of product variants
Do you need a larger quantity of products or a bespoke quote?
Very strong, thick hose suction – delivery intended for conveying wide range wet and dry substances abrasive. thick Layer inner smooth, antistatic, resistant to abrasion (70 mm 3 acc. to ISO 4649, formerly DIN 53516). A built-in copper wire which, after earthing (or connection to an earthed end), discharges electric charges. Layer outer corrugated, resistant to conditions atmospheric and ozone. hose intended is for conveying substances abrasive mixed with water and dry: cement, sand, gravel, seeds etc. appropriate for use in heavy conditions – „Heavy Duty”. can be bent on relatively small radius bends, whereas its bending requires considerable force. can be also easily cut on sections directly on space use and mounted of special fittings flanged PN10 (fitted on external surface hose). used in many use, e.g. for handling substances bulk in ports, for transport cuttings in mining, in industry chemical, in construction at works demolition, for suction and conveying water and sludge in works at dewatering, in gravel pits and sand plants, in works dredging and dredging. assembly: hose intended for mounting system VOLGA FRA – aluminum half-flanges PN10 applied externally on hose. Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +70°C.
Additional information
| Material | SBR/NR – a mixture of SBR and NR rubber |
|---|---|
| Maximum operating temperature [°C] | 70 |
| Minimum operating temperature [°C] | -40 |
| Vacuum resistance | yes |
| Standard length [m] | 10, 12, 60, 60 / 120 |
| Reinforcement | steel spiral, synthetic cover |















