A fitting hydraulic DKOS 90°, type ZMW222, series heavy, steel carbon, zinc-nickel

Additional information

Material

CS – steel (cast iron)

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), angled 90°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
TI-ZMW222-16-03-CNFitting 90° M16x1.5 female, hose 3/16", 24°, O-ring, heavy, Zn-Ni5-In stock0 €
Enquiry
TI-ZMW222-16-04-CNFitting 90° M16x1.5 female, hose 1/4", 24°, O-ring, heavy, Zn-Ni6-In stock0 €
Enquiry
TI-ZMW222-18-04-CNFitting 90° M18x1.5 female, hose 1/4", 24°, O-ring, heavy, Zn-Ni6-In stock0 €
Enquiry
TI-ZMW222-20-05-CNFitting 90° M20x1.5 female, hose 5/16", 24°, O-ring, heavy, Zn-Ni8-In stock0 €
Enquiry
TI-ZMW222-20-06-CNFitting 90° M20x1.5 female, hose 3/8", 24°, O-ring, heavy, Zn-Ni10-In stock0 €
Enquiry
TI-ZMW222-22-06-CNFitting 90° M22x1.5 female, hose 3/8", 24°, O-ring, heavy, Zn-Ni10-In stock0 €
Enquiry
TI-ZMW222-24-08-CNFitting 90° M24x1.5 female, hose 1/2", 24°, O-ring, heavy, Zn-Ni12-In stock0 €
Enquiry
TI-ZMW222-30-10-CNFitting 90° M30x2 female, hose 5/8", 24°, O-ring, heavy, Zn-Ni16-In stock0 €
Enquiry
TI-ZMW222-30-12-CNFitting 90° M30x2 female, hose 3/4", 24°, O-ring, heavy, Zn-Ni20-In stock0 €
Enquiry
TI-ZMW222-36-12-CNFitting 90° M36x2 female, hose 3/4", 24°, O-ring, heavy, Zn-Ni20-In stock0 €
Enquiry
TI-ZMW222-36-16-CNFitting 90° M36x2 female, hose 1", 24°, O-ring, heavy, Zn-Ni25-In stock0 €
Enquiry
TI-ZMW222-42-16-CNFitting 90° M42x2 female, hose 1", 24°, O-ring, heavy, Zn-Ni25-In stock0 €
Enquiry
TI-ZMW222-52-20-CNFitting 90° M52x2 female, hose 1.1/4", 24°, O-ring, heavy, Zn-Ni32-In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), angled 90°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.

Additional information

Material

CS – steel (cast iron)

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?