Is DKOR Hydraulic End ZBW120, Carbon Steel with Zinc-Nickel Coating compatible with standard crimping sleeves for hydraulic and industrial hoses?

Yes. DKOR Hydraulic End ZBW120, Carbon Steel with Zinc-Nickel Coating Format is compatible with standard crimping sleeves for hydraulic and industrial hoses when the correct sleeve is selected for the hose specification. The fitting features a classic hydraulic tail, internal BSP thread and nut, and seals with an O-ring on a 60° cone (DKOR), and it is explicitly designed for professional crimping. Ensure the crimping sleeve matches the hose type and dimensions to achieve a secure, reliable installation.

Does the DKOR Hydraulic End ZBW120, Carbon Steel with Zinc-Nickel Coating meet industry corrosion resistance standards for marine applications?

DKOR Hydraulic End ZBW120, Carbon Steel with Zinc-Nickel Coating Format meets common industry expectations for corrosion resistance in marine applications. The part is made from high-quality carbon steel and coated with a 6–10 µm zinc‑nickel layer that resists corrosion and has demonstrated up to 720 hours in a salt spray (fog) chamber without visible damage — a performance level that aligns with, or exceeds, many marine and offshore requirements (typical benchmarks such as ISO 9227 salt spray testing use similar hour ratings to qualify protective finishes). However, final suitability for a specific marine project depends on the exact standard specified by the end customer or regulatory body (e.g., specific ISO, ASTM, NORSOK, DNV, ABS requirements) and the service environment (continuous immersion, splash zone, tropical climates, chemical exposure). For absolute compliance, validate the ZBW120’s test reports against the project’s required standard and consider complementary measures (e.g., additional sealing, sacrificial anodes, maintenance schedules) for the harshest marine conditions.

A fitting hydraulic DKOR, type ZBW120, steel carbon, zinc-nickel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with a female BSP thread with a nut, O-ring sealing on a 60° cone (DKOR). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW120-04-04-CN	Fitting 1/4" BSP female, hose 1/4", 60° cone, O-ring, Zn-Ni	6	-	In stock	Enquiry
TI-ZBW120-06-06-CN	Fitting 3/8" BSP female, hose 3/8", 60° cone, O-ring, Zn-Ni	10	-	In stock	Enquiry
TI-ZBW120-08-08-CN	Fitting 1/2" BSP female, hose 1/2", 60° cone, O-ring, Zn-Ni	12	-	In stock	Enquiry
TI-ZBW120-10-10-CN	Fitting 5/8" BSP female, hose 5/8", 60° cone, O-ring, Zn-Ni	16	-	In stock	Enquiry
TI-ZBW120-12-12-CN	Fitting 3/4" BSP female, hose 3/4", 60° cone, O-ring, Zn-Ni	20	-	In stock	Enquiry
TI-ZBW120-16-16-CN	Fitting 1" BSP female, hose 1", 60° cone, O-ring, Zn-Ni	25	-	In stock	Enquiry
TI-ZBW120-20-16-CN	Fitting 1.1/4" BSP female, hose 1", 60° cone, O-ring, Zn-Ni	25	-	In stock	Enquiry
TI-ZBW120-20-20-CN	Fitting 1.1/4" BSP female, hose 1.1/4", 60° cone, O-ring, Zn-Ni	32	-	In stock	Enquiry
TI-ZBW120-24-20-CN	Fitting 1.1/2" BSP female, hose 1.1/4", 60° cone, O-ring, Zn-Ni	32	-	In stock	Enquiry
TI-ZBW120-24-24-CN	Fitting 1.1/2" BSP female, hose 1.1/2", 60° cone, O-ring, Zn-Ni	38	-	In stock	Enquiry
TI-ZBW120-32-24-CN	Fitting 2" BSP female, hose 1.1/2", 60° cone, O-ring, Zn-Ni	38	-	In stock	Enquiry
TI-ZBW120-32-32-CN	Fitting 2" BSP female, hose 2", 60° cone, O-ring, Zn-Ni	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with a female BSP thread with a nut, O-ring sealing on a 60° cone (DKOR). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.