Is the DKR 180° Hydraulic End ZBW510, Carbon Steel compatible with standard BSP-threaded hoses and which sleeve type is recommended for crimping?

DKR 180° Hydraulic End ZBW510, Carbon Steel Format is compatible with standard BSP-threaded hoses — it has an internal BSP thread with a nut and a 60° DKR sealing cone designed to mate with BSP fittings for a secure, leak-free connection. For crimping, use the dedicated crimp sleeve matched to the specific hose type you are using; the fitting is engineered to be crimped only with the correct sleeve for that hose to ensure a strong, durable joint under working conditions.

Can the DKR 180° Hydraulic End ZBW510, Carbon Steel withstand high-pressure pulse conditions and what maintenance is recommended to ensure long-term seal integrity?

DKR 180° Hydraulic End ZBW510, Carbon Steel Format can tolerate typical high-pressure hydraulic environments thanks to its carbon steel construction, zinc protective coating and a precise 60° DKR sealing cone designed for secure, leak-free joints. The robust crimp design with a sleeve matched to the hose type further enhances resistance to pressure and mechanical stresses, making it suitable for many demanding applications. However, exposure to high-pressure pulse (pressure spikes and rapid cyclic loads) increases fatigue on fittings and seals. While the ZBW510’s materials and geometry provide good baseline durability, performance under severe pulse conditions depends on system parameters (peak pressure, pulse frequency, fluid type, temperature) and correct crimping/installation. For applications with extreme pulsation, validate with manufacturer pressure-pulse ratings or choose fittings specifically rated for high-pulse service. Recommended maintenance to ensure long-term seal integrity: - Inspect periodically for signs of leakage, corrosion, deformation or sleeve slippage. - Verify torque and proper seating of the nut and 60° sealing cone during installation and after initial operation. - Ensure crimps are made with the correct sleeve and tool calibrated to manufacturer specifications. - Monitor system pressure cycles and avoid pressure spikes beyond rated limits; fit accumulators or dampeners if needed. - Replace fittings showing wear, thread damage, or compromised sealing surfaces; follow a scheduled replacement interval in high-pulse systems. - Use compatible fluids and maintain proper fluid cleanliness to reduce erosion and seal degradation. Following correct installation, crimping and a proactive inspection/replacement program will maximize the ZBW510’s long-term seal integrity under high-pressure and pulsing conditions.

DKR 180° Hydraulic End ZBW510, Carbon Steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

The standard hydraulic end type Z is a reliable and versatile solution designed for professional hydraulic and industrial applications. Equipped with a classic hydraulic tail for hose connection, it features an internal BSP thread with a nut and a precise 60° sealing cone (DKR), ensuring secure and leak-free performance. The 180° angled construction allows for straightforward installation in systems where direct hose routing is required, optimizing both efficiency and durability. Engineered for crimping with a dedicated sleeve matched to the specific hose type, this fitting guarantees a strong and lasting connection even under demanding working conditions. Manufactured from high-quality carbon steel and finished with a protective zinc coating, it offers excellent resistance to corrosion and mechanical wear, extending the service life of the entire hydraulic system. This robust and precisely crafted component is an ideal choice for industries seeking reliability, safety, and consistent performance in their hydraulic assemblies.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW510-04-04	End. 180° GW 1/4" BSP, hose 1/4", cone 60°	6	-	In stock	Enquiry
TI-ZBW510-06-05	End. 180° GW 3/8" BSP, hose 5/16", cone 60°	8	-	In stock	Enquiry
TI-ZBW510-06-06	End fitting 180° GW 3/8" BSP, hose 3/8", cone 60°	10	-	In stock	Enquiry
TI-ZBW510-08-08	End. 180° GW 1/2" BSP, hose 1/2", cone 60°	12	-	In stock	Enquiry
TI-ZBW510-12-12	End fitting 180° GW 3/4" BSP, hose 3/4", cone 60°	20	-	In stock	Enquiry
TI-ZBW510-16-16	End fitting 180° GW 1" BSP, hose 1", cone 60°	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The standard hydraulic end type Z is a reliable and versatile solution designed for professional hydraulic and industrial applications. Equipped with a classic hydraulic tail for hose connection, it features an internal BSP thread with a nut and a precise 60° sealing cone (DKR), ensuring secure and leak-free performance. The 180° angled construction allows for straightforward installation in systems where direct hose routing is required, optimizing both efficiency and durability. Engineered for crimping with a dedicated sleeve matched to the specific hose type, this fitting guarantees a strong and lasting connection even under demanding working conditions. Manufactured from high-quality carbon steel and finished with a protective zinc coating, it offers excellent resistance to corrosion and mechanical wear, extending the service life of the entire hydraulic system. This robust and precisely crafted component is an ideal choice for industries seeking reliability, safety, and consistent performance in their hydraulic assemblies.