Is the DKS 45° Hydraulic End, ZMW312 Heavy Series, Carbon Steel compatible with standard metric crimp sleeves and hose assemblies?

Yes. The DKS 45° Hydraulic End, ZMW312 Heavy Series, Carbon Steel is compatible with standard metric crimp sleeves and hose assemblies. It features an internal metric thread with nut and is explicitly designed for crimping with the appropriate sleeve for the selected hose type. The universal 24°/60° cone (DKS) and metal-to-metal seal ensure secure, leak-free connections when assembled with correctly sized metric sleeves and hose fittings. Ensure you select the sleeve and hose rated for the hose type, size, and pressure to match the heavy-series fitting specifications for a reliable, professional crimped assembly.

Can the DKS 45° Hydraulic End, ZMW312 Heavy Series, Carbon Steel be used with non-metallic or specialty hose liners and corresponding crimp sleeves?

Yes — DKS 45° Hydraulic End, ZMW312 Heavy Series, Carbon Steel can be used with non-metallic or specialty hose liners provided you follow these conditions: - Use the correct crimp sleeve specified for the hose construction and liner material. The product is described as “designed for crimping with the appropriate sleeve for the selected hose type,” so matching sleeve geometry and material is essential. - Confirm compatibility of the hose liner and sleeve with a metal-to-metal seal and 24°/60° cone interface. Some soft or thick liners may alter sealing behavior; ensure the liner compresses correctly under crimping to allow the cone and nut to form the required seal. - Verify pressure rating and service conditions. The heavy series is built for high pressure, but the hose/sleeve combination must carry equal or greater ratings and be suitable for the hydraulic fluid, temperature, and environment. - Follow manufacturer installation and crimping specifications (sleeve length, crimp force, die profile) and, if needed, perform burst/leak tests after assembly. - If using exotic liners (PTFE, thermoplastic, etc.), consult the hose and sleeve maker or technical datasheets to confirm that their materials won’t impair the metal-to-metal seal or deform under crimping. In short: technically feasible, but only with a properly matched sleeve, verified sealing behavior, and adherence to manufacturer specs and pressure/chemical compatibility.

DKS 45° Hydraulic End, ZMW312 Heavy Series, Carbon Steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

This standard hydraulic end fitting, type Z with a classic hydraulic tail for hose connection, is engineered for reliable performance in demanding hydraulic and industrial applications. Featuring an internal metric thread with nut and a precise metal-to-metal seal, it incorporates a universal 24°/60° cone (DKS) for secure and leak-free connections. The 45° angled heavy series design ensures optimal installation flexibility, even in confined spaces, while maintaining maximum durability under high pressure. Manufactured from high-quality carbon steel with a protective galvanized coating, the fitting offers excellent resistance to wear and corrosion, extending service life and reducing maintenance needs. Designed for crimping with the appropriate sleeve for the selected hose type, it guarantees a robust and professional assembly, making it a versatile solution for a wide range of hydraulic systems.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMW312-18-04	End. 45° GW M18x1.5, hose 1/4", 24/60°, heavy	6	-	In stock	Enquiry
TI-ZMW312-20-05	End fitting 45° GW M20x1.5, hose 5/16", 24/60°, heavy	8	-	In stock	Enquiry
TI-ZMW312-22-06	End. 45° G1/2 M22x1.5, hose 3/8", 24/60°, heavy	10	-	In stock	Enquiry
TI-ZMW312-24-08	End. 45° G1 M24x1.5, hose 1/2", 24/60°, heavy	12	-	In stock	Enquiry
TI-ZMW312-30-10	End. 45° G thread M30x2, hose 5/8", 24/60°, heavy	16	-	In stock	Enquiry
TI-ZMW312-36-12	End. 45° GW M36x2, hose 3/4", 24/60°, heavy	20	-	In stock	Enquiry
TI-ZMW312-42-16	End. 45° GW M42x2, hose 1", 24/60°, heavy	25	-	In stock	Enquiry
TI-ZMW312-52-20	End fitting 45° G1/2" M52x2, hose 1.1/4", 24/60°, heavy	32	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

This standard hydraulic end fitting, type Z with a classic hydraulic tail for hose connection, is engineered for reliable performance in demanding hydraulic and industrial applications. Featuring an internal metric thread with nut and a precise metal-to-metal seal, it incorporates a universal 24°/60° cone (DKS) for secure and leak-free connections. The 45° angled heavy series design ensures optimal installation flexibility, even in confined spaces, while maintaining maximum durability under high pressure. Manufactured from high-quality carbon steel with a protective galvanized coating, the fitting offers excellent resistance to wear and corrosion, extending service life and reducing maintenance needs. Designed for crimping with the appropriate sleeve for the selected hose type, it guarantees a robust and professional assembly, making it a versatile solution for a wide range of hydraulic systems.