Is the DIN 3015 Heavy Duty Clamp, Polyamide, Type 201 suitable for marine environments and saltwater exposure?

Yes. The DIN 3015 Heavy Duty Clamp, Polyamide, Type 201 is suitable for marine environments and saltwater exposure. It is explicitly noted as designed for marine applications and combines a self-extinguishing polyamide body with galvanized steel screws and plates and a carbon steel base, providing strong mechanical and environmental resistance. Galvanization offers corrosion protection for the metal fasteners and plates, and the polyamide clamp body resists moisture and chemical exposure common in marine settings. For maximal longevity in aggressive saltwater or highly corrosive offshore conditions, consider additional corrosion-resistant options or protective treatments and consult TUBES INTERNATIONAL® specialists to confirm the optimal material/configuration for your specific environment and maintenance regime.

Does the DIN 3015 Heavy Duty Clamp, Polyamide, Type 201 require any special anti-corrosion treatment when used in corrosive marine atmospheres over long periods?

DIN 3015 Heavy Duty Clamp, Polyamide, Type 201 Format is supplied with a carbon steel base and galvanized steel screws/plates, and a polyamide (self‑extinguishing) saddle. For general industrial and many marine uses this combination provides good mechanical strength and baseline corrosion resistance. However, in continuously corrosive marine atmospheres (salt spray, splashing seawater, high humidity) long‑term exposure will promote corrosion of the carbon steel base and even the galvanized hardware over time. Therefore, for prolonged service in aggressive marine environments you should consider additional anti‑corrosion measures: specification of stainless steel (e.g., A4/316) fasteners and plates and/or a corrosion‑resistant base (stainless or suitably coated carbon steel), or application of heavy‑duty protective coatings (marine-grade paint, epoxy or hot‑dip galvanizing of the base if not already treated). Periodic inspection and maintenance (cleaning, re‑coating or replacing corroded parts) are also recommended. Consult TUBES INTERNATIONAL® specialists to select the appropriate material/finish and any required treatments for your specific marine exposure and service life expectations.

DIN 3015 Heavy Duty Clamp, Polyamide, Type 201

All products, Clamps for hydraulic pipes/

Additional information

Material	P – material (plastic)

The DIN 3015 heavy clamp type 201 with top plate is a robust and reliable solution for secure installation of pipes and hoses in demanding industrial environments, including ground-based and marine applications. Designed in compliance with the DIN 3015 standard, it ensures quick, precise, and visually clean assembly while guaranteeing long-lasting performance. The clamp base can be welded directly to the structure, with alternative options for bolting or rail mounting to suit different installation needs. Its profiled interior surface provides a firm grip on the pipe, enhancing stability and vibration resistance. Manufactured from self-extinguishing polyamide with galvanized steel screws and plates, and a durable carbon steel base, the clamp delivers excellent resistance to mechanical stress and environmental factors. With an operating temperature range from -40°C to +180°C, it is suitable for both extreme cold and high-heat conditions. To expand functionality, additional components such as extended plates, rails, and mounting screws are available, ensuring tailored solutions for specific projects. For optimal selection and configuration, consultation with TUBES INTERNATIONAL® specialists is recommended.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-PA201-106	DIN3015 heavy PA clamp for 6 mm pipe	-	-	In stock	Enquiry
TC-PA201-106,4	DIN3015 heavy PA clamp for 6.4 mm pipe	-	-	In stock	Enquiry
TC-PA201-108	DIN3015 heavy PA clamp for 8 mm pipe	-	-	In stock	Enquiry
TC-PA201-109,5	DIN3015 heavy PA clamp for 9.5 mm pipe	-	-	In stock	Enquiry
TC-PA201-110	DIN3015 heavy PA clamp for 10 mm pipe	-	-	In stock	Enquiry
TC-PA201-112	DIN3015 heavy PA clamp for 12 mm pipe	-	-	In stock	Enquiry
TC-PA201-112,7	DIN3015 heavy PA clamp for 12.7 mm pipe	-	-	In stock	Enquiry
TC-PA201-113,5	DIN3015 heavy PA clamp for 13.5 mm pipe	-	-	In stock	Enquiry
TC-PA201-114	DIN3015 heavy PA clamp for 14 mm pipe	-	-	In stock	Enquiry
TC-PA201-115	DIN3015 heavy PA clamp for 15 mm pipe	-	-	In stock	Enquiry
TC-PA201-116	DIN3015 heavy PA clamp for 16 mm pipe	-	-	In stock	Enquiry
TC-PA201-117,2	DIN3015 heavy PA clamp for 17.2 mm pipe	-	-	In stock	Enquiry
TC-PA201-118	DIN3015 heavy PA clamp for 18 mm pipe	-	-	In stock	Enquiry
TC-PA201-219	DIN3015 heavy PA clamp for 19 mm pipe	-	-	In stock	Enquiry
TC-PA201-220	DIN3015 heavy PA clamp for 20 mm pipe	-	-	In stock	Enquiry
TC-PA201-221,3	DIN3015 heavy PA clamp for 21.3 mm pipe	-	-	In stock	Enquiry
TC-PA201-222	DIN3015 heavy PA clamp for 22 mm pipe	-	-	In stock	Enquiry
TC-PA201-225	DIN3015 heavy PA clamp for 25 mm pipe	-	-	In stock	Enquiry
TC-PA201-225,4	DIN3015 heavy PA clamp for 25.4 mm pipe	-	-	In stock	Enquiry
TC-PA201-226,9	DIN3015 heavy PA clamp for 26.9 mm pipe	-	-	In stock	Enquiry
TC-PA201-228	DIN3015 heavy PA clamp for 28 mm pipe	-	-	In stock	Enquiry
TC-PA201-230	DIN3015 heavy PA clamp for 30 mm pipe	-	-	In stock	Enquiry
TC-PA201-330	DIN3015 heavy PA clamp for 30 mm pipe	-	-	In stock	Enquiry
TC-PA201-332	DIN3015 heavy PA clamp for 32 mm pipe	-	-	In stock	Enquiry
TC-PA201-333,7	DIN3015 heavy PA clamp for 33.7 mm pipe	-	-	In stock	Enquiry
TC-PA201-335	DIN3015 heavy PA clamp for 35 mm pipe	-	-	In stock	Enquiry
TC-PA201-338	DIN3015 heavy PA clamp for 38 mm pipe	-	-	In stock	Enquiry
TC-PA201-340	DIN3015 heavy PA clamp for 40 mm pipe	-	-	In stock	Enquiry
TC-PA201-342	DIN3015 heavy PA clamp for 42 mm pipe	-	-	In stock	Enquiry
TC-PA201-342,4	DIN3015 heavy PA clamp for 42.4 mm pipe	-	-	In stock	Enquiry
TC-PA201-438	DIN3015 heavy PA clamp for 38 mm pipe	-	-	In stock	Enquiry
TC-PA201-442	DIN3015 heavy PA clamp for 42 mm pipe	-	-	In stock	Enquiry
TC-PA201-442,4	DIN3015 heavy PA clamp for 42.4 mm pipe	-	-	In stock	Enquiry
TC-PA201-444,5	DIN3015 heavy PA clamp for 44.5 mm pipe	-	-	In stock	Enquiry
TC-PA201-448,3	DIN3015 heavy PA clamp for 48.3 mm pipe	-	-	In stock	Enquiry
TC-PA201-450	DIN3015 heavy PA clamp for 50 mm pipe	-	-	In stock	Enquiry
TC-PA201-450,8	DIN3015 heavy PA clamp for 50.8 mm pipe	-	-	In stock	Enquiry
TC-PA201-455	DIN3015 heavy PA clamp for 55 mm pipe	-	-	In stock	Enquiry
TC-PA201-457	DIN3015 heavy PA clamp for 57 mm pipe	-	-	In stock	Enquiry
TC-PA201-460,3	DIN3015 heavy PA clamp for 60.3 mm pipe	-	-	In stock	Enquiry
TC-PA201-463,5	DIN3015 heavy PA clamp for 63.5 mm pipe	-	-	In stock	Enquiry
TC-PA201-465	DIN3015 heavy PA clamp for 65 mm pipe	-	-	In stock	Enquiry
TC-PA201-470	DIN3015 heavy PA clamp for 70 mm pipe	-	-	In stock	Enquiry
TC-PA201-565	DIN3015 heavy PA clamp for 65 mm pipe	-	-	In stock	Enquiry
TC-PA201-570	DIN3015 heavy PA clamp for 70 mm pipe	-	-	In stock	Enquiry
TC-PA201-575	DIN3015 heavy PA clamp for 75 mm pipe	-	-	In stock	Enquiry
TC-PA201-576,1	DIN3015 heavy PA clamp for 76.1 mm pipe	-	-	In stock	Enquiry
TC-PA201-580	DIN3015 heavy PA clamp for 80 mm pipe	-	-	In stock	Enquiry
TC-PA201-582,5	DIN3015 heavy PA clamp for pipe 82.5 mm	-	-	In stock	Enquiry
TC-PA201-588,9	DIN3015 heavy PA clamp for 88.9 mm pipe	-	-	In stock	Enquiry
TC-PA201-6100	DIN3015 heavy PA clamp for 100 mm pipe	-	-	In stock	Enquiry
TC-PA201-6101,6	DIN3015 heavy PA clamp for pipe 101.6 mm	-	-	In stock	Enquiry
TC-PA201-6108	DIN3015 heavy PA clamp for 108 mm pipe	-	-	In stock	Enquiry
TC-PA201-6114,3	DIN3015 heavy PA clamp for pipe 114.3 mm	-	-	In stock	Enquiry
TC-PA201-6127	DIN3015 heavy PA clamp for 127 mm pipe	-	-	In stock	Enquiry
TC-PA201-6133	DIN3015 heavy PA clamp for 133 mm pipe	-	-	In stock	Enquiry
TC-PA201-688,9	DIN3015 heavy PA clamp for 88.9 mm pipe	-	-	In stock	Enquiry
TC-PA201-7133	DIN3015 heavy PA clamp for 133 mm pipe	-	-	In stock	Enquiry
TC-PA201-7139,7	DIN3015 heavy PA clamp for pipe 139.7 mm	-	-	In stock	Enquiry
TC-PA201-7152,4	DIN3015 heavy PA clamp for pipe 152.4 mm	-	-	In stock	Enquiry
TC-PA201-7165	DIN3015 heavy PA clamp for 165 mm pipe	-	-	In stock	Enquiry
TC-PA201-7168,3	DIN3015 heavy PA clamp for pipe 168.3 mm	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The DIN 3015 heavy clamp type 201 with top plate is a robust and reliable solution for secure installation of pipes and hoses in demanding industrial environments, including ground-based and marine applications. Designed in compliance with the DIN 3015 standard, it ensures quick, precise, and visually clean assembly while guaranteeing long-lasting performance. The clamp base can be welded directly to the structure, with alternative options for bolting or rail mounting to suit different installation needs. Its profiled interior surface provides a firm grip on the pipe, enhancing stability and vibration resistance. Manufactured from self-extinguishing polyamide with galvanized steel screws and plates, and a durable carbon steel base, the clamp delivers excellent resistance to mechanical stress and environmental factors. With an operating temperature range from -40°C to +180°C, it is suitable for both extreme cold and high-heat conditions. To expand functionality, additional components such as extended plates, rails, and mounting screws are available, ensuring tailored solutions for specific projects. For optimal selection and configuration, consultation with TUBES INTERNATIONAL® specialists is recommended.