Is the One-Piece Carbon Steel Ear Clip Ring with Double Ears suitable for reinforced braid hoses and how do I install it with pliers?

Yes. The One-Piece Carbon Steel Ear Clip Ring with Double Ears is suitable for low-pressure hoses, including those reinforced with braid. Its design provides a secure, stable connection while the smooth, rounded inner edges protect the hose from damage, preserving the hose and system performance. How to install with pliers: 1. Position the One-Piece Carbon Steel Ear Clip Ring with Double Ears over the hose end and fitting so the ear(s) align with the clamp body. 2. Use dedicated ear-clamp pliers (sized for this type of ring). Place the pliers’ jaws around the ear(s). 3. Squeeze the pliers evenly and firmly until the ear is fully compressed and the clamp tightens snugly around the hose. Compress both ears (if applicable) to ensure uniform clamping pressure. 4. Inspect the clamp: it should sit evenly, with the inner edges flush against the hose and no visible gaps or pinched hose material. 5. Trim any protruding clip material if required and verify the joint under pressure for leaks. Tips: use the correct pliers for the ring size, compress ears fully but avoid over-crimping, and check compatibility with your hose and operating pressure.

Can the One-Piece Carbon Steel Ear Clip Ring with Double Ears be reused after removal, and what is the recommended removal method?

Yes. The One-Piece Carbon Steel Ear Clip Ring with Double Ears can be reused after removal, provided the ring and the hose are inspected and the clamp has not been permanently deformed, cracked, or excessively corroded. Recommended removal method: use appropriate removal pliers or cutting tools to gently spread or cut the ear(s) without nicking or crushing the hose. After removal, carefully straighten and inspect the ear and band; only reuse if the ear closes cleanly and the ring retains its original shape and clamping integrity. If any deformation, stress fractures, rust, or loss of tension is detected, replace the clamp with a new One-Piece Carbon Steel Ear Clip Ring with Double Ears to ensure a reliable, leak-free connection.

One-Piece Carbon Steel Ear Clip Ring with Double Ears

All products, Clamps for mounting ends/

Additional information

Material	CS – steel (cast iron)

The EAR CLIP clamp ring with two ears is a reliable solution for securing a wide range of low-pressure hoses, whether reinforced with braid or without additional reinforcement. Designed for efficiency, it allows for fast and effortless installation using dedicated pliers, ensuring a secure and stable connection in just a few simple steps. The smooth, rounded inner edges of the ring provide effective protection against hose damage, extending the service life of the system and maintaining consistent performance. Manufactured from durable galvanized carbon steel, the clamp offers excellent resistance to wear and corrosion, making it a dependable choice for demanding applications. Its robust construction combined with user-friendly assembly makes it an ideal fastening element for professionals seeking both quality and convenience.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-03012099	Clamp ring. EAR CLIP-2 10÷12 mm, W1	-	-	In stock	Enquiry
AB-03012101	Clamp ring. EAR CLIP-2 5÷7 mm, W1	-	-	In stock	Enquiry
AB-03012110	Clamp ring. EAR CLIP-2 7÷9 mm, W1	-	-	In stock	Enquiry
AB-03012128	Clamp ring. EAR CLIP-2 9÷11 mm, W1	-	-	In stock	Enquiry
AB-03012136	Clamp ring. EAR CLIP-2 11÷13 mm, W1	-	-	In stock	Enquiry
AB-03012144	Clamp ring. EAR CLIP-2 13÷15 mm, W1	-	-	In stock	Enquiry
AB-03012152	Clamp ring. EAR CLIP-2 14÷17 mm, W1	-	-	In stock	Enquiry
AB-03012160	Clamp ring. EAR CLIP-2 15÷18 mm, W1	-	-	In stock	Enquiry
AB-03012179	Clamp ring. EAR CLIP-2 17÷20 mm, W1	-	-	In stock	Enquiry
AB-03012187	Clamp ring. EAR CLIP-2 18÷21 mm, W1	-	-	In stock	Enquiry
AB-03012195	Clamp ring. EAR CLIP-2 20÷23 mm, W1	-	-	In stock	Enquiry
AB-03012208	Clamp ring. EAR CLIP-2 22÷25 mm, W1	-	-	In stock	Enquiry
AB-03012216	Clamp ring. EAR CLIP-2 23÷27 mm, W1	-	-	In stock	Enquiry
AB-03012224	Clamp ring. EAR CLIP-2 25÷28 mm, W1	-	-	In stock	Enquiry
AB-03012232	Clamp ring. EAR CLIP-2 28÷31 mm, W1	-	-	In stock	Enquiry
AB-03012240	Clamp ring. EAR CLIP-2 31÷34 mm, W1	-	-	In stock	Enquiry
AB-03012259	Clamp ring. EAR CLIP-2 34÷37 mm, W1	-	-	In stock	Enquiry
AB-03012267	Clamp ring. EAR CLIP-2 37÷40 mm, W1	-	-	In stock	Enquiry
AB-03012275	Clamp ring. EAR CLIP-2 40÷43 mm, W1	-	-	In stock	Enquiry
AB-03012283	Clamp ring. EAR CLIP-2 43÷46 mm, W1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The EAR CLIP clamp ring with two ears is a reliable solution for securing a wide range of low-pressure hoses, whether reinforced with braid or without additional reinforcement. Designed for efficiency, it allows for fast and effortless installation using dedicated pliers, ensuring a secure and stable connection in just a few simple steps. The smooth, rounded inner edges of the ring provide effective protection against hose damage, extending the service life of the system and maintaining consistent performance. Manufactured from durable galvanized carbon steel, the clamp offers excellent resistance to wear and corrosion, making it a dependable choice for demanding applications. Its robust construction combined with user-friendly assembly makes it an ideal fastening element for professionals seeking both quality and convenience.