Ferrules clamping type LDR, LD, LR, steel carbon

Additional information

Material

CS – steel (cast iron)

Ferrules type LDR, LD, LR intended are for crimping ends stainless hygienic (with serrated tail) type NH-xxK-xxx and ends with tail for hose under a clamp shell RS, e.g. TW-KRS-xxx, NH-xxR-xxx in hoses industrial (rubber and plastic of reinforcement textile, optionally of spiral reinforcing – hoses suction – delivery). sleeve should select taking under attention diameter inner Dw and external Dz hose. length ferrule L can be slightly (several mm) greater od length tail fittings Lk. ferrules LR – only for ends under a clamp shell, LD – only for ends with tail serrated, LDR – ferrules for obu types ends. Diameter D1 – Diameter outer. Diameter D2 – Diameter inner. Diameter D3 – Diameter lock. Material: galvanised carbon steel.

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
TI-LDR-045-20Ferrule type LDR 45 mm for hose 1.1/4"32-In stock0 €
Enquiry
TI-LDR-048-20Ferrule type LDR 48 mm for hose 1.1/4"32-In stock0 €
Enquiry
TI-LDR-050-24Ferrule type LDR 50 mm for hose 1.1/2"38-In stock0 €
Enquiry
TI-LDR-056-24Ferrule type LDR 56 mm for hose 1.1/2"38-In stock0 €
Enquiry
TI-LDR-064-32Ferrule type LDR 64 mm for hose 2"50-In stock0 €
Enquiry
TI-LDR-068-32Ferrule type LDR 68 mm for hose 2"50-In stock0 €
Enquiry
TI-LDR-071-32Ferrule type LDR 71 mm for hose 2"50-In stock0 €
Enquiry
TI-LDR-073-32Ferrule type LDR 73 mm for hose 2"50-In stock0 €
Enquiry
TI-LDR-078-40Ferrule type LDR 78 mm for hose 2.1/2"65-In stock0 €
Enquiry
TI-LDR-082-40Ferrule type LDR 82 mm for hose 2.1/2"65-In stock0 €
Enquiry
TI-LDR-085-40Ferrule type LDR 85 mm for hose 2.1/2"65-In stock0 €
Enquiry
TI-LDR-090-48Ferrule type LDR 90 mm for hose 3"80-In stock0 €
Enquiry
TI-LDR-092-40Ferrule type LDR 92 mm for hose 2.1/2"65-In stock0 €
Enquiry
TI-LDR-092-48Ferrule type LDR 92 mm for hose 3"80-In stock0 €
Enquiry
TI-LDR-095-48Ferrule type LDR 95 mm for hose 3"80-In stock0 €
Enquiry
TI-LDR-098-48Ferrule type LDR 98 mm for hose 3"80-In stock0 €
Enquiry
TI-LDR-114-48Ferrule type LDR 114 mm for hose 3"80-In stock0 €
Enquiry
TI-LR-115-64Ferrule type LR 115 mm for hose 4"100-In stock0 €
Enquiry
TI-LR-120-64Ferrule type LR 120 mm for hose 4"100-In stock0 €
Enquiry
TI-LR-123-64Ferrule type LR 123 mm for hose 4"100-In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

Ferrules type LDR, LD, LR intended are for crimping ends stainless hygienic (with serrated tail) type NH-xxK-xxx and ends with tail for hose under a clamp shell RS, e.g. TW-KRS-xxx, NH-xxR-xxx in hoses industrial (rubber and plastic of reinforcement textile, optionally of spiral reinforcing – hoses suction – delivery). sleeve should select taking under attention diameter inner Dw and external Dz hose. length ferrule L can be slightly (several mm) greater od length tail fittings Lk. ferrules LR – only for ends under a clamp shell, LD – only for ends with tail serrated, LDR – ferrules for obu types ends. Diameter D1 – Diameter outer. Diameter D2 – Diameter inner. Diameter D3 – Diameter lock. Material: galvanised carbon steel.

Additional information

Material

CS – steel (cast iron)

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?