What maintenance schedule is recommended for the Compressed Air Pressure Regulator REG, NEW DEAL Series to ensure reliable long-term performance?

For reliable long-term performance of the Compressed Air Pressure Regulator REG, NEW DEAL Series, follow this maintenance schedule: - Weekly: Visually inspect for external damage, leaks at BSP connections and gauge port, and ensure mounting fasteners remain secure. Verify gauge reading corresponds to required setpoint. - Monthly: Check inlet supply for contamination and moisture; drain upstream filters and condensate traps. Operate the regulator through its adjustment range to confirm smooth movement and stable output. - Quarterly (every 3 months): Clean external surfaces and remove debris from ports. Inspect threads and sealing surfaces; re-seal or replace pipe sealant/tape if needed. Verify pressure gauge accuracy; replace if erratic. - Biannually (every 6 months): Inspect internal components (diaphragm/piston, springs, seats) for wear, corrosion, or deformation. Replace worn seals or piston components per manufacturer recommendations. Check wall-mount points and realign if vibration is present. - Annually: Perform a full functional test under typical supply pressure (up to 18 bar) and operating temperature conditions (up to +50°C). Confirm flow capacity and pressure regulation across expected ranges (0–2, 0–4, 0–8, 0–12 bar). Replace consumables (seals, O-rings) proactively. - As needed: If performance degrades (pressure instability, leaking, reduced flow), remove and service the regulator immediately; replace damaged parts. Use clean, dry compressed air and proper filtration to minimize maintenance frequency. Follow any additional manufacturer service instructions and use genuine replacement parts.

How can I verify compatibility of the Compressed Air Pressure Regulator REG, NEW DEAL Series with existing BSP-threaded piping and pressure gauges?

To verify compatibility of the Compressed Air Pressure Regulator REG, NEW DEAL Series with existing BSP-threaded piping and pressure gauges, follow these steps: 1. Check thread types and sizes - The REG, NEW DEAL Series has BSP female threaded inlet and outlet. Confirm your piping uses BSP (not NPT) threads. - Available body sizes: 1/4", 3/8", 1/2", 3/4", 1". Match your pipe nominal size to the regulator model. 2. Verify gauge connection - For regulator sizes up to 1/2" the gauge port is BSP 1/8". - For 3/4" and 1" models the gauge port is BSP 1/4". Ensure your pressure gauges have the corresponding BSP male thread or use an appropriate adapter. 3. Confirm pressure and temperature limits - Ensure your system’s maximum supply pressure does not exceed 18 bar. - Ensure operating temperature does not exceed +50°C. - Choose the regulator output range that matches your application (0–2, 0–4, 0–8, or 0–12 bar). 4. Check flow capacity - Verify required flow at operating conditions: 650 l/min (1/4"), 2500 l/min (3/8" & 1/2"), 4500 l/min (3/4" & 1") at 6 bar inlet and Δp = 1 bar. Select a size that meets your flow demand. 5. Mounting and physical fit - The regulator supports wall mounting via body holes; confirm clearance and mounting orientation in your installation. 6. Use adapters if needed - If your system uses different thread standards or sizes, use appropriate BSP adapters or fittings rated for the pressures involved. Following these checks ensures mechanical and operational compatibility with your existing BSP-threaded piping and gauges.

Compressed Air Pressure Regulator REG, NEW DEAL Series

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	50

The piston-type REG pressure reducing valve from the NEW DEAL series is a robust and reliable solution designed to ensure stable operation even in demanding industrial environments. Engineered for versatility, it offers wall-mounting capability through dedicated body holes, making installation fast and convenient. Available in sizes 1/4″, 3/8″, 1/2″, 3/4″, and 1″, it provides precise regulation of output pressure within ranges of 0–2, 0–4, 0–8, or 0–12 bar, with a maximum supply pressure of up to 18 bar. The valve operates efficiently at temperatures up to +50°C and features BSP female threaded connections for both inlet and outlet, ensuring compatibility with standard systems. For accurate monitoring, it includes a pressure gauge connection of BSP 1/8″ for sizes up to 1/2″ and BSP 1/4″ for larger models. With impressive flow capacities—650 l/min at 1/4″, 2500 l/min at 3/8″ and 1/2″, and up to 4500 l/min at 3/4″ and 1″ (at 6 bar inlet pressure, Δp = 1 bar)—this valve guarantees optimal performance and efficiency. Its durable construction and high adaptability make it an excellent choice for industries seeking reliable pressure control, energy savings, and long-lasting operation.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-1202001	REG 1/4 04 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1202002	REG 1/4 08 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1202003	REG 1/4 012 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1202004	REG 1/4 02 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1302001	REG 3/8 04 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1302002	REG 3/8 08 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1302003	REG 3/8 012 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1402001	REG 1/2 04 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1402002	REG 1/2 08 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1402003	REG 1/2 012 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1502001	REG 3/4 04 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1502002	REG 3/4 08 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1502003	REG 3/4 012 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1602001	REG 1 04 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1602002	REG 1 08 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry
MW-1602003	REG 1 012 pressure reducing valve (NEW DEAL)	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The piston-type REG pressure reducing valve from the NEW DEAL series is a robust and reliable solution designed to ensure stable operation even in demanding industrial environments. Engineered for versatility, it offers wall-mounting capability through dedicated body holes, making installation fast and convenient. Available in sizes 1/4″, 3/8″, 1/2″, 3/4″, and 1″, it provides precise regulation of output pressure within ranges of 0–2, 0–4, 0–8, or 0–12 bar, with a maximum supply pressure of up to 18 bar. The valve operates efficiently at temperatures up to +50°C and features BSP female threaded connections for both inlet and outlet, ensuring compatibility with standard systems. For accurate monitoring, it includes a pressure gauge connection of BSP 1/8″ for sizes up to 1/2″ and BSP 1/4″ for larger models. With impressive flow capacities—650 l/min at 1/4″, 2500 l/min at 3/8″ and 1/2″, and up to 4500 l/min at 3/4″ and 1″ (at 6 bar inlet pressure, Δp = 1 bar)—this valve guarantees optimal performance and efficiency. Its durable construction and high adaptability make it an excellent choice for industries seeking reliable pressure control, energy savings, and long-lasting operation.