Can Clamp DIN 3015 Standard, Aluminum, Type 100 be welded directly to structures and still withstand temperatures up to +350°C?

Yes. Clamp DIN 3015 Standard, Aluminum, Type 100 Format can be welded directly to structures and still withstand temperatures up to +350°C. The product description specifies that the clamp base may be welded to the structure and that the assembly—manufactured from high-quality aluminum with a robust carbon steel base and galvanized steel screws—is designed for resistance to wear and high operating temperatures up to +350°C. For final selection and to ensure compatibility with your specific application and welding procedure, consult TUBES INTERNATIONAL®.

Does the Clamp DIN 3015 Standard, Aluminum, Type 100 require special welding procedures or base materials when mounted on marine structures to prevent corrosion?

Clamp DIN 3015 Standard, Aluminum, Type 100 Format does not inherently require special welding procedures or exotic base materials solely because it is mounted on marine structures. The product description states the clamp base can be welded directly to the structure and is intended for marine applications, which implies standard welding of the carbon steel base is an accepted installation method. However, to prevent corrosion in marine environments, good practice includes: - Use appropriate corrosion-control measures on the welded joint and surrounding area (surface preparation, compatible welding consumables, and post-weld treatments such as passivation, priming, or coating). - Protect dissimilar metal contacts (aluminum clamp body, galvanized steel screws, carbon steel base) from galvanic corrosion by using isolating coatings, non-conductive barriers, or sacrificial anodes as needed. - Select welding procedures and filler materials compatible with the carbon steel base and the substrate material of the structure; avoid welding aluminum parts (the clamp body) directly unless the design calls for it. - Consider upgrading to stainless or specially coated bases if the structure is in very aggressive marine (splash or immersion) environments. For final assurance and to meet project-specific corrosion requirements, consult TUBES INTERNATIONAL® or a qualified welding/corrosion engineer to specify welding consumables, pre/post-weld treatments, and any alternative base materials or protective systems.

Clamp DIN 3015 Standard, Aluminum, Type 100

All products, Clamps for hydraulic pipes/

Additional information

Material	AL – aluminum

The DIN 3015 standard clamp type 100 (without top plate) provides a reliable and efficient solution for fastening pipes, tubes, and hoses in demanding industrial environments, including ground-based and marine applications. Designed for quick installation and long-lasting performance, it ensures both functional durability and a clean, professional appearance. The clamp base can be welded directly to the structure, with alternative options for bolting or rail mounting available to suit different installation needs. Its profiled interior surface secures the pipe firmly, minimizing vibration and enhancing stability. Depending on the size group, the clamp is equipped with either one or two hexagon socket screws, ensuring optimal fastening strength. Manufactured from high-quality aluminum with galvanized steel screws and a robust carbon steel base, the clamp guarantees resistance to wear and high operating temperatures up to +350°C. To expand functionality, additional components such as extended plates, rails, and mounting screws can be supplied, allowing for tailored configurations. For precise selection and compatibility, consultation with TUBES INTERNATIONAL® is recommended, ensuring the perfect fit for every application.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-AL100-106	DIN3015 standard AL clamp for 6 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-108	DIN3015 standard AL clamp for 8 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-110	DIN3015 standard AL clamp for 10 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-112	DIN3015 standard clamp AL for 12 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-213,5	DIN3015 standard AL clamp for 13.5 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-214	DIN3015 standard AL clamp for 14 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-215	DIN3015 standard clamp AL for 15 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-216	DIN3015 standard AL clamp for 16 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-217,2	DIN3015 standard clamp AL for pipe 17.2 mm, without p. g.	-	-	In stock	Enquiry
TC-AL100-218	DIN3015 standard AL clamp for 18 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-319	DIN3015 standard AL clamp for 19 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-320	DIN3015 standard AL clamp for 20 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-321,3	DIN3015 standard AL clamp for 21.3 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-322	DIN3015 standard AL clamp for 22 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-325	DIN3015 standard clamp AL for 25 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-426,9	DIN3015 standard AL clamp for a 26.9 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-428	DIN3015 standard AL clamp for 28 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-430	DIN3015 standard AL clamp for 30 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-432	DIN3015 standard clamp AL for 32 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-532	DIN3015 standard AL clamp for 32 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-533,7	DIN3015 standard clamp AL for 33.7 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-535	DIN3015 standard clamp AL for 35 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-538	DIN3015 standard clamp AL for 38 mm pipe, without rubber lining.	-	-	In stock	Enquiry
TC-AL100-540	DIN3015 standard clamp AL for 40 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-542	DIN3015 standard AL clamp for 42 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-545	DIN3015 standard AL clamp for 45 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-644,5	DIN3015 standard AL clamp for 44.5 mm pipe, without p. g.	-	-	In stock	Enquiry
TC-AL100-648,3	DIN3015 standard clamp AL for pipe 48.3 mm, without p. g.	-	-	In stock	Enquiry
TC-AL100-650,8	DIN3015 standard clamp AL for pipe 50.8 mm, without p. g.	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The DIN 3015 standard clamp type 100 (without top plate) provides a reliable and efficient solution for fastening pipes, tubes, and hoses in demanding industrial environments, including ground-based and marine applications. Designed for quick installation and long-lasting performance, it ensures both functional durability and a clean, professional appearance. The clamp base can be welded directly to the structure, with alternative options for bolting or rail mounting available to suit different installation needs. Its profiled interior surface secures the pipe firmly, minimizing vibration and enhancing stability. Depending on the size group, the clamp is equipped with either one or two hexagon socket screws, ensuring optimal fastening strength. Manufactured from high-quality aluminum with galvanized steel screws and a robust carbon steel base, the clamp guarantees resistance to wear and high operating temperatures up to +350°C. To expand functionality, additional components such as extended plates, rails, and mounting screws can be supplied, allowing for tailored configurations. For precise selection and compatibility, consultation with TUBES INTERNATIONAL® is recommended, ensuring the perfect fit for every application.