Is the CEL Hydraulic End ZMZ111, Light Series, AISI 316L Stainless Steel compatible with standard crimping sleeves for my hose type?

Yes — the CEL Hydraulic End ZMZ111, Light Series, AISI 316L Stainless Steel is compatible with standard crimping sleeves used for your hose type, provided you use a matching sleeve specified for that hose. The ZMZ111 is specifically engineered for crimping with a sleeve adapted to the hose type and features the CEL external metric thread with a 60° cone sealing system to ensure a precise fit and leak-free connection. To guarantee correct assembly and safety, confirm that the sleeve diameter, profile and crimp specifications match the hose manufacturer’s recommendations and the ZMZ111 dimensions; follow the recommended crimping tool settings and inspection procedures.

Can the CEL Hydraulic End ZMZ111, Light Series, AISI 316L Stainless Steel be used with alternative crimping sleeves from other manufacturers?

CEL Hydraulic End ZMZ111, Light Series, AISI 316L Stainless Steel Format is specifically engineered for crimping with a matching sleeve adapted to the hose type. Using alternative crimping sleeves from other manufacturers is possible only if those sleeves exactly match the OEM sleeve’s dimensions, material specifications, crimp profile, and are rated for the same hose type and operating pressures. Mismatched sleeves can lead to improper crimp geometry, poor sealing at the 60° cone (CEL) interface, reduced mechanical retention, leaks or premature failure, and may void warranties or certifications. Before substituting: - Confirm sleeve inner diameter, wall thickness, and overall length match the required sleeve for ZMZ111. - Verify the crimp profile and die set compatibility with your crimping equipment. - Ensure the sleeve material and strength meet or exceed the OEM specification and are compatible with AISI 316L and the fluid/media. - Check pressure ratings and applicable standards/certifications. If in doubt, consult the sleeve manufacturer’s data sheet and the fitting/hose supplier or perform qualified testing (burst, crimp pull-out, and leak tests) to validate the assembly.

A fitting hydraulic CEL, type ZMZ111, series light, steel AISI 316L

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	10

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with a thread external metric, sealing on a 60° cone (CEL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMZ111-10-04-SS	Fitting M10x1 male, hose 1/4", 24°, light, AISI 316L	6	-	In stock	Enquiry
TI-ZMZ111-12-04-SS	Fitting M12x1.5 male, hose 1/4", 24°, light, AISI 316L	6	-	In stock	Enquiry
TI-ZMZ111-14-04-SS	Fitting M14x1.5 male, hose 1/4", 24°, light, AISI 316L	6	-	In stock	Enquiry
TI-ZMZ111-16-04-SS	Fitting M16x1.5 male, hose 1/4", 24°, light, AISI 316L	6	-	In stock	Enquiry
TI-ZMZ111-16-05-SS	Fitting M16x1.5 male, hose 5/16", 24°, light, AISI 316L	8	-	In stock	Enquiry
TI-ZMZ111-16-06-SS	Fitting M16x1.5 male, hose 3/8", 24°, light, AISI 316L	10	-	In stock	Enquiry
TI-ZMZ111-18-04-SS	Fitting M18x1.5 male, hose 1/4", 24°, light, AISI 316L	6	-	In stock	Enquiry
TI-ZMZ111-18-05-SS	Fitting M18x1.5 male, hose 5/16", 24°, light, AISI 316L	8	-	In stock	Enquiry
TI-ZMZ111-18-06-SS	Fitting M18x1.5 male, hose 3/8", 24°, light, AISI 316L	10	-	In stock	Enquiry
TI-ZMZ111-22-06-SS	Fitting M22x1.5 male, hose 3/8", 24°, light, AISI 316L	10	-	In stock	Enquiry
TI-ZMZ111-22-08-SS	Fitting M22x1.5 male, hose 1/2", 24°, light, AISI 316L	12	-	In stock	Enquiry
TI-ZMZ111-22-10-SS	Fitting M22x1.5 male, hose 5/8", 24°, light, AISI 316L	16	-	In stock	Enquiry
TI-ZMZ111-26-08-SS	Fitting M26x1.5 male, hose 1/2", 24°, light, AISI 316L	12	-	In stock	Enquiry
TI-ZMZ111-26-10-SS	Fitting M26x1.5 male, hose 5/8", 24°, light, AISI 316L	16	-	In stock	Enquiry
TI-ZMZ111-30-12-SS	Fitting M30x2 male, hose 3/4", 24°, light, AISI 316L	20	-	In stock	Enquiry
TI-ZMZ111-36-16-SS	Fitting M36x2 male, hose 1", 24°, light, AISI 316L	25	-	In stock	Enquiry
TI-ZMZ111-45-20-SS	Fitting M45x2 male, hose 1.1/4", 24°, light, AISI 316L	32	-	In stock	Enquiry
TI-ZMZ111-52-24-SS	Fitting M52x2 male, hose 1.1/2", 24°, light, AISI 316L	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with a thread external metric, sealing on a 60° cone (CEL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.