How does the FLEX-GEAR 847 Stainless Steel Compensation Spring Band auto-compensate for hose shrinkage and maintain a leak-free seal under temperature changes?

The FLEX-GEAR 847 Stainless Steel Compensation Spring Band auto-compensates for hose shrinkage and maintains a leak-free seal through its integrated spring-driven worm-drive design. Eight disc springs sit directly beneath the screw head; as the hose material shrinks from cold flow or wide temperature swings, the springs compress or expand to take up the gap, keeping a constant radial clamping force around the entire hose circumference. This dynamic compensation prevents loosening and preserves a secure, uniform seal without manual readjustment. An internal insert protects the hose surface from damage while the stainless steel 410 screw/lock and 300-series band deliver durable, corrosion-resistant pressure retention. Proper installation is signaled when the screw end protrudes beyond the lock housing and the disc springs are fully compressed. Recommended torque 5.6 Nm (max 9.6 Nm) ensures optimal spring preload and leak-free performance under extreme temperature variations.

How do I know when the FLEX-GEAR 847 Stainless Steel Compensation Spring Band is correctly installed and fully engaged?

Correct installation and full engagement of the FLEX-GEAR 847 Stainless Steel Compensation Spring Band is confirmed by two clear indicators: 1. Screw end beyond lock housing — after tightening to the specified torque (recommended 5.6 Nm, maximum 9.6 Nm), the screw tip must protrude past the lock housing. This shows the clamp has been driven into its final position. 2. Disc springs fully compressed — the eight disc springs under the screw head should be visibly or tactilely compressed. Full compression indicates the integrated spring mechanism is active and compensating for hose shrinkage, ensuring constant clamping force around the hose. Additional guidance: - Use the internal insert to protect the hose surface while tightening. - Do not exceed the 9.6 Nm maximum torque to avoid damage. - When both the screw extension and spring compression are present, the clamp will maintain consistent pressure without manual readjustment, providing a secure, leak-free seal.

FLEX-GEAR 847 Stainless Steel Compensation Spring Band

All products, Clamps for mounting ends/

Additional information

Material	SS – stainless steel

The band clamp with worm drive and integrated spring system is designed to deliver reliable, long-lasting sealing performance even under demanding conditions. Its innovative spring mechanism, composed of eight disc springs positioned beneath the screw head, automatically compensates for hose shrinkage caused by material cold flow or extreme temperature fluctuations. This ensures constant clamping force and a secure, leak-free connection around the entire hose circumference. The internal insert provides additional protection, preventing hose surface damage during use. Engineered for environments with significant temperature variations, the clamp maintains consistent pressure without the need for manual readjustment. Proper installation is indicated when the screw end extends beyond the lock housing and the disc springs are fully compressed. Manufactured with a stainless steel 410 screw and lock, combined with a stainless steel 300 band of 14.3 mm width, the clamp offers superior durability and corrosion resistance. With a recommended tightening torque of 5.6 Nm (maximum 9.6 Nm), this solution guarantees both safety and efficiency, making it an excellent choice for applications requiring dependable sealing and long-term performance.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-847010	FLEX-GEAR band 14÷27 mm, SS	-	-	In stock	Enquiry
AB-847012	FLEX-GEAR band 16÷32 mm, SS	-	-	In stock	Enquiry
AB-847016	FLEX-GEAR band 21÷38 mm, SS	-	-	In stock	Enquiry
AB-847020	FLEX-GEAR strap 20÷44 mm, SS	-	-	In stock	Enquiry
AB-847024	FLEX-GEAR band 27÷51 mm, SS	-	-	In stock	Enquiry
AB-847028	FLEX-GEAR band 33÷57 mm, SS	-	-	In stock	Enquiry
AB-847032	FLEX-GEAR clamp 40÷63 mm, SS	-	-	In stock	Enquiry
AB-847036	FLEX-GEAR strap 46÷70 mm, SS	-	-	In stock	Enquiry
AB-847040	FLEX-GEAR strap 52÷76 mm, SS	-	-	In stock	Enquiry
AB-847044	FLEX-GEAR strap 59÷82 mm, SS	-	-	In stock	Enquiry
AB-847048	FLEX-GEAR strap 65÷89 mm, SS	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The band clamp with worm drive and integrated spring system is designed to deliver reliable, long-lasting sealing performance even under demanding conditions. Its innovative spring mechanism, composed of eight disc springs positioned beneath the screw head, automatically compensates for hose shrinkage caused by material cold flow or extreme temperature fluctuations. This ensures constant clamping force and a secure, leak-free connection around the entire hose circumference. The internal insert provides additional protection, preventing hose surface damage during use. Engineered for environments with significant temperature variations, the clamp maintains consistent pressure without the need for manual readjustment. Proper installation is indicated when the screw end extends beyond the lock housing and the disc springs are fully compressed. Manufactured with a stainless steel 410 screw and lock, combined with a stainless steel 300 band of 14.3 mm width, the clamp offers superior durability and corrosion resistance. With a recommended tightening torque of 5.6 Nm (maximum 9.6 Nm), this solution guarantees both safety and efficiency, making it an excellent choice for applications requiring dependable sealing and long-term performance.