NiTO Clean set for foam and rinsing: NiTO I COMBI gun + lance 17 cm + bowl 2.5 Litra, 6 bar

Additional information

Foaming and rinsing kit: NITO I COMBI gun (NT-53105A1), 2.5 l cleaning agent tank with a foam injector, suction hose and a set of 15 dosing nozzles, 17 cm lance with a rinsing nozzle. The layer of foam produced by the kit is spread over the surface being cleaned. The cleaning and foaming liquid is metered from the tank through appropriately sized nozzles (from 0.4% to 10% solution concentration), then flows through an air-aspirating injector, producing a stream of foam at the injector nozzle outlet. Once the foam has achieved its cleaning effect, it is rinsed off with water using the rinsing nozzle attached to the gun. The kits are available in various colours. Maximum working pressure: 6 bar. Maximum working temperature: +40°C.

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
NT-57086A1Gun NiTO I COMBI + lance 17 cm + hose suction + 15 nozzles + zb. 2.5 l, white - set-6In stock0 €
Enquiry
NT-57256A1Gun NiTO I COMBI + lance 17 cm + hose suction + 15 nozzles + zb. 2.5 l, red - set-6In stock0 €
Enquiry
NT-57257A1Gun NiTO I COMBI + lance 17 cm + hose suction + 15 nozzles + zb. 2.5 l, blue - set-6In stock0 €
Enquiry
NT-57258A1Gun NiTO I COMBI + lance 17 cm + hose suction + 15 nozzles + zb. 2.5 l, yellow - set-6In stock0 €
Enquiry
NT-57259A1Gun NiTO I COMBI + lance 17 cm + hose suction + 15 nozzles + zb. 2.5 l, green - set-6In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

Foaming and rinsing kit: NITO I COMBI gun (NT-53105A1), 2.5 l cleaning agent tank with a foam injector, suction hose and a set of 15 dosing nozzles, 17 cm lance with a rinsing nozzle. The layer of foam produced by the kit is spread over the surface being cleaned. The cleaning and foaming liquid is metered from the tank through appropriately sized nozzles (from 0.4% to 10% solution concentration), then flows through an air-aspirating injector, producing a stream of foam at the injector nozzle outlet. Once the foam has achieved its cleaning effect, it is rinsed off with water using the rinsing nozzle attached to the gun. The kits are available in various colours. Maximum working pressure: 6 bar. Maximum working temperature: +40°C.

Additional information

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?