Twin thermoplastic hose with a steel braid MTB2

Additional information

Material

PA – polyamide

Maximum operating temperature [°C]

100

Minimum operating temperature [°C]

-40

Vacuum resistance

check

Reinforcement

2 steel braids

Flexible thermoplastic MTB2 hose with double steel braid, designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. Twin version (two hoses with bonded outer covers). The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: double steel braid. Outer layer: polyurethane. Working pressure: from 275 bar to 400 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
ZC-MTB2-06Hose thermoplastic MTB2 2x1/4"6400In stock0 €
Enquiry
ZC-MTB2-08Hose thermoplastic MTB2 2x5/16"8350In stock0 €
Enquiry
ZC-MTB2-10Hose thermoplastic MTB2 2x3/8"10330In stock0 €
Enquiry
ZC-MTB2-13Hose thermoplastic MTB2 2x1/2"12275In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

Flexible thermoplastic MTB2 hose with double steel braid, designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. Twin version (two hoses with bonded outer covers). The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: double steel braid. Outer layer: polyurethane. Working pressure: from 275 bar to 400 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).

Additional information

Material

PA – polyamide

Maximum operating temperature [°C]

100

Minimum operating temperature [°C]

-40

Vacuum resistance

check

Reinforcement

2 steel braids

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?