Twin thermoplastic hose with a steel braid MTB1
MTB1 thermoplastic hose with steel braid is a flexible high-pressure hose in a twin version (two hoses with bonded outer covers). Designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 350 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).
List of product variants
Do you need a larger quantity of products or a bespoke quote?
MTB1 thermoplastic hose with steel braid is a flexible high-pressure hose in a twin version (two hoses with bonded outer covers). Designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 350 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).
Additional information
| Material | PA – polyamide |
|---|---|
| Maximum operating temperature [°C] | 100 |
| Minimum operating temperature [°C] | -40 |
| Vacuum resistance | check |
| Reinforcement | steel braid |















