Is the 45° Crimped End with GW and Nut, FAG Type, Carbon Steel compatible with standard PTFE brake hose fittings and thread sizes?

Yes — the 45° Crimped End with GW and Nut, FAG Type, Carbon Steel is explicitly designed for PTFE brake hoses and is compatible with standard PTFE brake hose fittings and thread sizes. Its internal thread and integrated nut provide the correct mating interface for common PTFE hose connectors, ensuring a secure, leak‑free connection. The robust carbon steel construction and precise machining maintain thread integrity under high mechanical loads and repeated service, while the 45° profile supports proper hose routing without stressing the connection. For absolute assurance, verify that the specific thread standard (e.g., metric or BSP/UNF size) of your mating fitting matches the internal thread spec of the chosen FAG crimped end; when matched, compatibility and reliable performance are ensured.

Can the 45° Crimped End with GW and Nut, FAG Type, Carbon Steel withstand exposure to salt spray and coastal environments without accelerated corrosion?

The 45° Crimped End with GW and Nut, FAG Type, Carbon Steel offers good baseline corrosion resistance due to its carbon steel construction combined with a chrome plating. Chrome plating provides a protective barrier against moisture, wear, and many corrosive factors, making the fitting suitable for general industrial and demanding operating conditions. However, chrome‑plated carbon steel is not inherently equivalent to stainless steel or specially coated alloys for prolonged exposure to salt spray and coastal environments. Salt spray (chloride) promotes pitting and crevice corrosion, and over time it can penetrate or damage standard chrome plating—especially at edges, crimps, threads, or any mechanically stressed or abraded areas. The internal thread and crimp joint are potential initiation sites for corrosion if coating integrity is compromised. Conclusion: - Short‑term or occasional exposure to coastal air/mild salt spray: likely acceptable with regular inspection and maintenance. - Continuous, heavy salt‑spray exposure or long‑term coastal use: risk of accelerated corrosion exists; for best longevity specify corrosion‑resistant stainless steel (e.g., 316/316L) or additional protective treatments/coatings and implement corrosion‑inhibiting maintenance (regular cleaning, corrosion inhibitors, sacrificial anodes, or protective covers). If required, request manufacturer salt‑spray (ASTM B117) test data or consider upgrading material/coating for guaranteed long‑term performance in marine environments.

45° Crimped End with GW and Nut, FAG Type, Carbon Steel

All products, Brake hoses and fittings/

Additional information

Material	CS – steel (cast iron)

The 45° crimped end with internal thread and nut, type FAG, is a high‑quality fitting designed specifically for PTFE brake hoses, ensuring secure and reliable connections in demanding applications. Manufactured from robust carbon steel and finished with a durable chrome plating, it offers excellent resistance to corrosion, wear, and high mechanical stress, guaranteeing long service life even under extreme operating conditions. The precise 45‑degree angle allows for optimal hose routing in tight spaces, improving installation flexibility and maintaining consistent performance. Thanks to its internal thread and integrated nut, the fitting ensures a tight, leak‑free seal, enhancing both safety and efficiency in braking systems. Engineered for professional use, it combines strength, precision, and durability, making it an ideal choice for industries where reliability and performance are paramount.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RK-FAG45P-0N	End 45° with G1/2 thread and M10x1.25 nut, chrome-plated steel	3	-	In stock	Enquiry
RK-FAG45P-1N	End 45° with G1/2 female thread and M10x1 nut, chrome-plated steel	3	-	In stock	Enquiry
RK-FAG45P-2N	End 45° with G1/2" with nut 3/8"-24, chrome-plated steel	3	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The 45° crimped end with internal thread and nut, type FAG, is a high‑quality fitting designed specifically for PTFE brake hoses, ensuring secure and reliable connections in demanding applications. Manufactured from robust carbon steel and finished with a durable chrome plating, it offers excellent resistance to corrosion, wear, and high mechanical stress, guaranteeing long service life even under extreme operating conditions. The precise 45‑degree angle allows for optimal hose routing in tight spaces, improving installation flexibility and maintaining consistent performance. Thanks to its internal thread and integrated nut, the fitting ensures a tight, leak‑free seal, enhancing both safety and efficiency in braking systems. Engineered for professional use, it combines strength, precision, and durability, making it an ideal choice for industries where reliability and performance are paramount.