Can the Hydraulic Pressure Test Kit with Connectors, No Gauges, 630 bar, Type 750 KP handle repeated use with hydraulic fluids other than mineral oil?

Yes — the Hydraulic Pressure Test Kit with Connectors, No Gauges, 630 bar, Type 750 KP can be used with hydraulic fluids other than mineral oil, with some caveats. Why it’s compatible: - Metallic components are high‑quality steel with a zinc‑nickel coating, offering strong chemical resistance to many hydraulic fluids. - Seals are NBR (nitrile rubber), which is compatible with a wide range of mineral oils, petroleum‑based hydraulic fluids, and some synthetic fluids. Limitations to check: - NBR is not compatible with certain fluids — notably many phosphate‑ester (fire‑resistant) fluids, some high‑grade synthetic esters, and certain aggressive solvents. These can swell, harden or degrade NBR, risking leaks or seal failure. - Operating temperature and fluid additives can affect seal performance; elevated temperatures accelerate degradation. Recommendation: - Verify the fluid type: if it’s petroleum‑based or a compatible synthetic (check NBR compatibility charts), the kit is suitable. For phosphate‑ester, silicone, or other incompatible fluids, replace seals with a compatible material (e.g., FKM/Viton or EPDM) or consult the manufacturer before use.

Is the Hydraulic Pressure Test Kit with Connectors, No Gauges, 630 bar, Type 750 KP compatible with hydraulic systems using synthetic or water-glycol fluids?

Hydraulic Pressure Test Kit with Connectors, No Gauges, 630 bar, Type 750 KP Format: Based on the product description, the kit’s components (high-quality steel with zinc‑nickel coating and NBR sealing) are rated for durability and corrosion resistance up to 630 bar. However, compatibility with specific hydraulic fluids depends mainly on the seal material: NBR (nitrile rubber) is generally compatible with mineral hydraulic oils and many petroleum‑based fluids, but has limited resistance to some synthetic fluids and water‑glycol (HFA/HFC) fluids—exposure can cause swelling, hardening or reduced lifespan of NBR seals. Therefore, Hydraulic Pressure Test Kit with Connectors, No Gauges, 630 bar, Type 750 KP is suitable for systems using mineral oils but is not recommended for prolonged use with certain synthetic fluids or water‑glycol fluids unless the manufacturer confirms NBR compatibility with those specific fluids. For reliable use with synthetic or water‑glycol fluids, request kits with seals rated for those fluids (e.g., FKM/Viton, EPDM) or confirm fluid compatibility with the supplier.

Set measuring pressure in system hydraulic of couplings, without pressure gauges, 630 bar, type 750 KP

All products, Measurement sets/

Additional information

Material	P – material (plastic)

Set measuring intended is for diagnostics installation hydraulic and pneumatic through measurement pressure static, dynamic and vacuum. set contains plastic case with prepared space on two pressure gauge 63 mm, hose DN2 (630 bar) with two fitting measurement M16x2 female o length 2000 mm and coupling and adapters: 1. coupling measurement M16x2 with a cap metal, with male thread 1/4” BSP, type E – 2 pcs 2. coupling measurement M16x2 with a cap metal, with male thread M8x1, type F – 1 pcs 3. coupling measurement M16x2 with a cap metal, with male thread M10x1, type F – 1 pcs 4. Connection with female thread 1/4” BSP for pressure gauge, bulkhead, with male thread M16x2 – 2 pcs 5. Connection with female thread 1/4” BSP for pressure gauge, with female thread M16x2 – 1 pcs 6. Adapter reducing male 3/8” BSP / M10x1 female, type E – 1 pcs 7. Adapter reducing male 1/2” BSP / M10x1 female, type E – 1 pcs set not contain pressure gauge, which should select and separately order. Material fittings: steel with coating zinc nickel. sealing: NBR. Working pressure: up to 630 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
PS-750-KP2	Measurement set 750 KP2 (large, without pressure gauges)	-	-	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Set measuring intended is for diagnostics installation hydraulic and pneumatic through measurement pressure static, dynamic and vacuum. set contains plastic case with prepared space on two pressure gauge 63 mm, hose DN2 (630 bar) with two fitting measurement M16x2 female o length 2000 mm and coupling and adapters: 1. coupling measurement M16x2 with a cap metal, with male thread 1/4” BSP, type E – 2 pcs 2. coupling measurement M16x2 with a cap metal, with male thread M8x1, type F – 1 pcs 3. coupling measurement M16x2 with a cap metal, with male thread M10x1, type F – 1 pcs 4. Connection with female thread 1/4” BSP for pressure gauge, bulkhead, with male thread M16x2 – 2 pcs 5. Connection with female thread 1/4” BSP for pressure gauge, with female thread M16x2 – 1 pcs 6. Adapter reducing male 3/8” BSP / M10x1 female, type E – 1 pcs 7. Adapter reducing male 1/2” BSP / M10x1 female, type E – 1 pcs set not contain pressure gauge, which should select and separately order. Material fittings: steel with coating zinc nickel. sealing: NBR. Working pressure: up to 630 bar.