Is the 90° Interlock Metric GW End, Heavy Series Carbon Steel Connector compatible with hose types 4SH, R13, and R15 for high-pressure hydraulic systems?

Yes. The 90° Interlock Metric GW End, Heavy Series Carbon Steel Connector is compatible with hose types 4SH, R13, and R15 for high-pressure hydraulic systems. Its 24° cone with integrated O-ring provides a secure, leak-free seal under extreme pressures, and the heavy-series carbon steel construction with galvanization ensures durability, corrosion resistance, and reliable performance in demanding applications such as construction, mining, agriculture, and heavy machinery.

What maintenance is required to ensure long-term seal integrity of the 90° Interlock Metric GW End, Heavy Series Carbon Steel Connector?

To ensure long-term seal integrity of the 90° Interlock Metric GW End, Heavy Series Carbon Steel Connector, follow a regular maintenance program: - Inspect O-ring and sealing surfaces: At scheduled intervals and after any pressure events, visually inspect the integrated O-ring and the 24° cone seating for cuts, nicks, flattening, extrusion, or contamination. Replace O-rings showing any damage or aging. - Clean mating surfaces: Keep the cone, threads and connector bore free of debris, dirt and corrosion. Use a lint-free cloth and appropriate solvent; avoid abrasives that could alter the sealing geometry. - Check for corrosion and plating wear: Examine the galvanization for flaking, pitting or wear. If protective plating is compromised, consider refurbishment or replacement to prevent corrosion that can degrade sealing performance. - Verify torque and alignment: Ensure fittings are installed to the correct torque and fully engaged for optimal alignment. Misalignment or under/over-tightening can damage the 24° cone or O-ring. - Monitor for leaks under pressure: Perform periodic pressure tests and leak checks in service. Any sign of seepage warrants immediate shutdown and rework. - Replace after excessive service or damage: In abrasive, high-vibration, or extreme-pressure applications, adopt a conservative replacement interval for connectors showing wear to maintain safety and reliability. - Use compatible hoses and fluids: Maintain compatibility with hose types 4SH, R13, R15 and recommended hydraulic fluids to avoid chemical attack on seals. - Store and handle properly: Protect spare connectors from mechanical damage and contamination; store in a dry environment to preserve galvanization and O-rings. Following these steps preserves the 90° Interlock Metric GW End, Heavy Series Carbon Steel Connector’s sealing performance, extending service life and minimizing leaks and downtime.

A fitting 90° INTERLOCK female metric, series heavy, steel carbon

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

A fitting 90° INTERLOCK with a female metric thread, 24° cone with an O-ring, series heavy, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ILMW222-24-12	Fitting 90° INTERLOCK M24x1.5 female, hose 3/4"	20	-	In stock	Enquiry
TI-ILMW222-30-12	Fitting 90° INTERLOCK M30x2 female, hose 3/4"	20	-	In stock	Enquiry
TI-ILMW222-36-12	Fitting 90° INTERLOCK M36x2 female, hose 3/4"	20	-	In stock	Enquiry
TI-ILMW222-36-16	Fitting 90° INTERLOCK M36x2 female, hose 1"	25	-	In stock	Enquiry
TI-ILMW222-42-16	Fitting 90° INTERLOCK M42x2 female, hose 1"	25	-	In stock	Enquiry
TI-ILMW222-52-20	Fitting 90° INTERLOCK M52x2 female, hose 1.1/4"	32	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting 90° INTERLOCK with a female metric thread, 24° cone with an O-ring, series heavy, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.