Is the Adjustable Plug Tee "T" with Male Thread, Type R32 compatible with both vacuum and compressed air systems?

Yes. The Adjustable Plug Tee "T" with Male Thread, Type R32 is compatible with both vacuum and compressed air systems. Made of nickel-plated brass with NBR seals, it is rated for working pressures up to 16 bar and operates reliably from -20°C to +80°C. Its design permits quick, repeated assembly while maintaining mechanical and pneumatic sealing integrity, ensuring leak-free performance in demanding vacuum and compressed-air applications.

Can the Adjustable Plug Tee "T" with Male Thread, Type R32 be used with other seal materials besides NBR for extreme temperature or chemical applications?

The Adjustable Plug Tee "T" with Male Thread, Type R32 is supplied with NBR (nitrile) seals and is rated for operation from -20°C to +80°C. NBR offers good resistance to oils, fuels and general pneumatic media but has limitations with very low/high temperatures and certain chemicals (strong acids, ketones, aromatic hydrocarbons). If your application requires extreme temperatures or aggressive chemicals, you should consider alternative seal materials (e.g., FKM/Viton for higher temperature and many chemicals, EPDM for steam/heat and some chemicals, or PTFE for broad chemical resistance and very high temperatures). However, compatibility depends on the connector’s design and whether seals of those materials are available and correctly sized for the Adjustable Plug Tee "T" with Male Thread, Type R32. Before substituting seals: - Confirm manufacturer availability of alternative seal kits for Type R32. - Verify chemical compatibility and temperature limits of the chosen material. - Ensure the seal material maintains required elasticity and leak-tight performance under your system pressure (up to 16 bar) and duty cycle. - If in doubt, consult the supplier or perform compatibility testing. Without official alternative-seal options from the manufacturer, do not assume safe interchangeability.

Tee plug-in “T” adjustable with thread external, type R32

All products, Push-in fittings/

Additional information

Material	B – brass (bronze)

Tee plug-in “T” adjustable with thread external, type R32, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2032005	Tee fitting T adjustable R32 hose 5 mm, 1/8" BSP male	-	16	In stock	Enquiry
MW-2032017	Tee fitting T adjustable RL32 hose 12 mm, 3/8" BSP male	-	16	In stock	Enquiry
MW-2032018	Tee fitting T adjustable RL32 hose 12 mm, 1/2" BSP male	-	16	In stock	Enquiry
MW-2032019	Tee fitting T adjustable RL32 hose 14 mm, 1/2" BSP male	-	16	In stock	Enquiry
MW-2L32001	Tee fitting T adjustable RL32 hose 4 mm, M5 male	-	16	In stock	Enquiry
MW-2L32002	Tee fitting T adjustable RL32 hose 4 mm, 1/8" BSP male	-	16	In stock	Enquiry
MW-2L32003	Tee fitting T adjustable RL32 hose 4 mm, 1/4" BSP male	-	16	In stock	Enquiry
MW-2L32004	Tee fitting T adjustable RL32 hose 6 mm, M5 male	-	16	In stock	Enquiry
MW-2L32008	Tee fitting T adjustable RL32 hose 6 mm, 1/8" BSP male	-	16	In stock	Enquiry
MW-2L32009	Tee fitting T adjustable RL32 hose 6 mm, 1/4" BSP male	-	16	In stock	Enquiry
MW-2L32010	Tee fitting T adjustable RL32 hose 8 mm, 1/8" BSP male	-	16	In stock	Enquiry
MW-2L32011	Tee fitting T adjustable RL32 hose 8 mm, 1/4" BSP male	-	16	In stock	Enquiry
MW-2L32012	Tee fitting T adjustable RL32 hose 8 mm, 3/8" BSP male	-	16	In stock	Enquiry
MW-2L32013	Tee fitting T adjustable RL32 hose 10 mm, 1/4" BSP male	-	16	In stock	Enquiry
MW-2L32014	Tee fitting T adjustable RL32 hose 10 mm, 3/8" BSP male	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Tee plug-in “T” adjustable with thread external, type R32, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.