What is the maximum corrosion resistance of AGR hydraulic end ZBZ110, carbon steel with zinc‑nickel finish, and how long will it last in harsh environments?

The AGR hydraulic end ZBZ110, carbon steel with zinc‑nickel finish, offers very high corrosion resistance: the zinc‑nickel plating is 6–10 µm thick and has been tested to withstand up to 720 hours in a salt spray (neutral salt spray) chamber without visible corrosion. In practical terms, that indicates excellent protection in harsh, corrosive environments (marine, offshore, chemical plants) and significantly prolongs service life compared with standard zinc or uncoated steel. Actual field life will depend on exposure severity (salt concentration, temperature, humidity, mechanical wear, chemical agents) and maintenance, but the 720‑hour NSS result corresponds to long‑term resistance measured under standardized accelerated conditions and suggests the fitting will remain corrosion‑free for extended periods in demanding applications.

Does the AGR hydraulic end ZBZ110, carbon steel with zinc‑nickel finish, require special maintenance to retain its 720‑hour salt spray resistance in corrosive environments?

No special maintenance is required to retain the specified 720‑hour salt spray resistance for the AGR hydraulic end ZBZ110, carbon steel with zinc‑nickel finish, provided the fitting is used and installed according to the manufacturer’s instructions. The 6–10 µm zinc‑nickel coating is engineered to deliver long‑lasting corrosion protection in aggressive environments. To ensure performance: - Avoid mechanical damage to the coating during handling, assembly, or crimping. - Use compatible sleeves and follow recommended crimping procedures to prevent exposure of bare steel. - Prevent aggressive chemical exposure (strong acids, alkalis, or chlorinated solvents) that can degrade coatings. - Inspect fittings periodically for physical damage or coating compromise and replace any parts with visible coating loss or corrosion. Following these precautions and standard installation practices will preserve the AGR hydraulic end ZBZ110’s corrosion resistance as rated.

A fitting hydraulic AGR, type ZBZ110, steel carbon, zinc-nickel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with a male BSP thread, cone sealing 60° (AGR). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBZ110-02-04-CN	Fitting 1/8" BSP male, hose 1/4", 60° cone, Zn-Ni	6	-	In stock	Enquiry
TI-ZBZ110-04-04-CN	Fitting 1/4" BSP male, hose 1/4", 60° cone, Zn-Ni	6	-	In stock	Enquiry
TI-ZBZ110-06-04-CN	Fitting 3/8" BSP male, hose 1/4", 60° cone, Zn-Ni	6	-	In stock	Enquiry
TI-ZBZ110-06-05-CN	Fitting 3/8" BSP male, hose 5/16", 60° cone, Zn-Ni	8	-	In stock	Enquiry
TI-ZBZ110-06-06-CN	Fitting 3/8" BSP male, hose 3/8", 60° cone, Zn-Ni	10	-	In stock	Enquiry
TI-ZBZ110-06-08-CN	Fitting 3/8" BSP male, hose 1/2", 60° cone, Zn-Ni	12	-	In stock	Enquiry
TI-ZBZ110-08-06-CN	Fitting 1/2" BSP male, hose 3/8", 60° cone, Zn-Ni	10	-	In stock	Enquiry
TI-ZBZ110-08-08-CN	Fitting 1/2" BSP male, hose 1/2", 60° cone, Zn-Ni	12	-	In stock	Enquiry
TI-ZBZ110-10-08-CN	Fitting 5/8" BSP male, hose 1/2", 60° cone, Zn-Ni	12	-	In stock	Enquiry
TI-ZBZ110-10-10-CN	Fitting 5/8" BSP male, hose 5/8", 60° cone, Zn-Ni	16	-	In stock	Enquiry
TI-ZBZ110-12-08-CN	Fitting 3/4" BSP male, hose 1/2", 60° cone, Zn-Ni	12	-	In stock	Enquiry
TI-ZBZ110-12-10-CN	Fitting 3/4" BSP male, hose 5/8", 60° cone, Zn-Ni	16	-	In stock	Enquiry
TI-ZBZ110-12-12-CN	Fitting 3/4" BSP male, hose 3/4", 60° cone, Zn-Ni	20	-	In stock	Enquiry
TI-ZBZ110-16-12-CN	Fitting 1" BSP male, hose 3/4", 60° cone, Zn-Ni	20	-	In stock	Enquiry
TI-ZBZ110-16-16-CN	Fitting 1" BSP male, hose 1", 60° cone, Zn-Ni	25	-	In stock	Enquiry
TI-ZBZ110-20-16-CN	Fitting 1.1/4" BSP male, hose 1", 60° cone, Zn-Ni	25	-	In stock	Enquiry
TI-ZBZ110-20-20-CN	Fitting 1.1/4" BSP male, hose 1.1/4", 60° cone, Zn-Ni	32	-	In stock	Enquiry
TI-ZBZ110-24-24-CN	Fitting 1.1/2" BSP male, hose 1.1/2", 60° cone, Zn-Ni	38	-	In stock	Enquiry
TI-ZBZ110-32-32-CN	Fitting 2" BSP male, hose 2", 60° cone, Zn-Ni	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with a male BSP thread, cone sealing 60° (AGR). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.