Is the BANJO carbon steel RL type, solder end compatible with DIN 7642-rated hydraulic and pneumatic systems?

Yes. The BANJO carbon steel RL type, solder end is designed in close alignment with DIN 7642 and is therefore compatible with DIN 7642-rated hydraulic and pneumatic systems. Its carbon steel construction delivers the strength and wear resistance required for high-pressure service, while the RL type solder end provides precise, secure soldered joints that help ensure leak-free operation. This makes the fitting suitable for demanding applications where safety, reliability, and adherence to DIN 7642 specifications are required.

Can the BANJO carbon steel RL type, solder end be used with other DIN-standard fittings and adapters in mixed-material hydraulic or pneumatic systems?

Yes — the BANJO carbon steel RL type, solder end can be used with other DIN-standard fittings and adapters in mixed-material hydraulic or pneumatic systems, but with important caveats: - Compatibility: Its design aligns closely with DIN 7642, so mechanical fit with other DIN-standard components is generally good. Verify thread sizes, seating faces and dimensions against the specific DIN part numbers you plan to mate. - Material considerations: Carbon steel vs. stainless steel, brass or aluminum can create galvanic corrosion in certain environments. Use protective coatings, compatible materials, or isolation (e.g., sealing washers, sleeves) where corrosion risk exists. - Soldered joint limits: The soldered connection is permanent and intended for reliable, leak-free service, but soldered ends are less serviceable than threaded or flanged joints. Ensure the solder and process produce a pressure-rated joint compatible with system operating pressures and temperatures. - Sealing and pressure integrity: Confirm that mating DIN fittings use compatible sealing methods (O-rings, metal-to-metal seats, gaskets). If sealing geometries differ, add appropriate adapters or seals to maintain leak-free operation. - Thermal and chemical compatibility: Check operating temperature, fluid compatibility and thermal expansion differences between materials to avoid leaks or premature failure. - Certification and safety: For critical or regulated systems, verify compliance and pressure ratings for the assembled combination; consider testing the final assembly. In summary, BANJO carbon steel RL type, solder end can be integrated with other DIN-standard fittings if dimensional compatibility, material interactions, sealing method and pressure/temperature ratings are confirmed and appropriate precautions (corrosion protection, proper soldering, suitable seals) are applied.

A fitting BANJO for soldering, steel carbon, type RL

All products, Low-pressure fittings and adapters/

Additional information

Material	CS – steel (cast iron)

A fitting BANJO type RL for soldering, close for DIN 7642. Material: steel carbon.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EC-109006	Fitting BANJO RL 6 mm (tube 4 mm)	-	30	In stock	Enquiry
EC-109008	Fitting BANJO RL 8 mm (tube 5 mm)	-	30	In stock	Enquiry
EC-109010	Fitting BANJO RL 10 mm (tube 6 mm)	-	30	In stock	Enquiry
EC-109012	Fitting BANJO RL 12 mm (tube 6 mm)	-	30	In stock	Enquiry
EC-109014	Fitting BANJO RL 14 mm (tube 6 mm)	-	30	In stock	Enquiry
EC-109112	Fitting BANJO RL 12 mm (tube 8 mm)	-	30	In stock	Enquiry
EC-109114	Fitting BANJO RL 14 mm (tube 8 mm)	-	30	In stock	Enquiry
EC-109213	Fitting BANJO RL 12 mm (tube 10 mm)	-	30	In stock	Enquiry
EC-109214	Fitting BANJO RL 14 mm (tube 10 mm)	-	30	In stock	Enquiry
EC-109216	Fitting BANJO RL 16 mm (tube 10 mm)	-	30	In stock	Enquiry
EC-109316	Fitting BANJO RL 16 mm (tube 12 mm)	-	30	In stock	Enquiry
EC-109318	Fitting BANJO RL 18 mm (tube 12 mm)	-	30	In stock	Enquiry
EC-109418	Fitting BANJO RL 18 mm (tube 15 mm)	-	30	In stock	Enquiry
EC-109422	Fitting BANJO RL 22 mm (tube 18 mm)	-	30	In stock	Enquiry
EC-109426	Fitting BANJO RL 26 mm (tube 18 mm)	-	30	In stock	Enquiry
EC-109526	Fitting BANJO RL 26 mm (tube 22 mm)	-	30	In stock	Enquiry
EC-109530	Fitting BANJO RL 30 mm (tube 28 mm)	-	30	In stock	Enquiry