Is the BEL metric tubular end ZMR111, light series, stainless steel AISI 316L compatible with standard crimping sleeves for hydraulic hoses?

Yes. The BEL metric tubular end ZMR111, light series, stainless steel AISI 316L is designed for crimping onto hydraulic and industrial hoses using the appropriate crimping sleeve matched to the hose type. Its classic hydraulic tail and cutting ring (BEL) sealing ensure a secure, precise, and reliable assembly when the correct crimping sleeve and crimping parameters for the specific hose are used. The AISI 316L construction provides corrosion resistance and durability, making it suitable for demanding environments and a wide range of industrial applications.

Can BEL metric tubular end ZMR111, light series, stainless steel AISI 316L be used in marine environments without additional corrosion protection?

Yes. BEL metric tubular end ZMR111, light series, stainless steel AISI 316L can be used in marine environments without additional corrosion protection in most typical seawater-exposed applications. AISI 316L is a molybdenum-bearing austenitic stainless steel with very good resistance to chloride-induced corrosion (pitting and crevice corrosion) compared with 304, and the product description explicitly states suitability for marine and aggressive environments. Proper installation using the correct crimping sleeve and hose type is essential to maintain seal integrity and avoid crevice sites where corrosion can initiate. Caveats: in exceptionally aggressive conditions (continuous immersion in warm, stagnant, or polluted seawater, splash zones with heavy chlorides, or exposure to galvanic couples), or where maximum service life is critical, consider additional measures — design to avoid crevices, use compatible mating materials, sacrificial anodes, or local coatings — and assess with site-specific corrosion analysis. Regular inspection and maintenance are also recommended.

A fitting tubular metric BEL, type ZMR111, series light, steel AISI 316L

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	40, 50

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with tube metric, sealing a ring cutting (BEL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMR111-06-02-SS	Fitting tube 6 mm, hose 1/8", light, AISI 316L	3	-	In stock	Enquiry
TI-ZMR111-06-03-SS	Fitting tube 6 mm, hose 3/16", light, AISI 316L	5	-	In stock	Enquiry
TI-ZMR111-06-04-SS	Fitting tube 6 mm, hose 1/4", light, AISI 316L	6	-	In stock	Enquiry
TI-ZMR111-08-04-SS	Fitting tube 8 mm, hose 1/4", light, AISI 316L	6	-	In stock	Enquiry
TI-ZMR111-08-05-SS	Fitting tube 8 mm, hose 5/16", light, AISI 316L	8	-	In stock	Enquiry
TI-ZMR111-08-06-SS	Fitting tube 8 mm, hose 3/8", light, AISI 316L	10	-	In stock	Enquiry
TI-ZMR111-10-05-SS	Fitting tube 10 mm, hose 5/16", light, AISI 316L	8	-	In stock	Enquiry
TI-ZMR111-10-06-SS	Fitting tube 10 mm, hose 3/8", light, AISI 316L	10	-	In stock	Enquiry
TI-ZMR111-12-06-SS	Fitting tube 12 mm, hose 3/8", light, AISI 316L	10	-	In stock	Enquiry
TI-ZMR111-12-08-SS	Fitting tube 12 mm, hose 1/2", light, AISI 316L	12	-	In stock	Enquiry
TI-ZMR111-15-06-SS	Fitting tube 15 mm, hose 3/8", light, AISI 316L	10	-	In stock	Enquiry
TI-ZMR111-15-08-SS	Fitting tube 15 mm, hose 1/2", light, AISI 316L	12	-	In stock	Enquiry
TI-ZMR111-18-08-SS	Fitting tube 18 mm, hose 1/2", light, AISI 316L	12	-	In stock	Enquiry
TI-ZMR111-18-10-SS	Fitting tube 18 mm, hose 5/8", light, AISI 316L	16	-	In stock	Enquiry
TI-ZMR111-18-12-SS	Fitting tube 18 mm, hose 3/4", light, AISI 316L	20	-	In stock	Enquiry
TI-ZMR111-22-10-SS	Fitting tube 22 mm, hose 5/8", light, AISI 316L	16	-	In stock	Enquiry
TI-ZMR111-22-12-SS	Fitting tube 22 mm, hose 3/4", light, AISI 316L	20	-	In stock	Enquiry
TI-ZMR111-28-16-SS	Fitting tube 28 mm, hose 1", light, AISI 316L	25	-	In stock	Enquiry
TI-ZMR111-35-20-SS	Fitting tube 35 mm, hose 1.1/4", light, AISI 316L	32	-	In stock	Enquiry
TI-ZMR111-42-24-SS	Fitting tube 42 mm, hose 1.1/2", light, AISI 316L	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with tube metric, sealing a ring cutting (BEL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.