Can the Bimetal Thermometer with Rear Sensor, Ø63/100 mm, Models TB63T & TB100T be replaced without stopping the process thanks to its screwed protective cover?

Yes — the Bimetal Thermometer with Rear Sensor, Ø63/100 mm, Models TB63T & TB100T can be replaced without stopping the process. Its screwed protective cover with external thread secures the sensor while allowing the instrument to be simply pressed into or withdrawn from the cover, enabling quick replacement under pressure. The cover is rated up to 160 bar and uses a GW BSP 1/2" connection, so the thermometer can be serviced rapidly without interrupting operation, provided at least half the sensor length remains immersed during use for accurate readings.

Is the Bimetal Thermometer with Rear Sensor, Ø63/100 mm, Models TB63T & TB100T suitable for use in aggressive or corrosive industrial media?

Bimetal Thermometer with Rear Sensor, Ø63/100 mm, Models TB63T & TB100T Format: Not recommended for use in aggressive or corrosive industrial media as standard. The standard construction uses galvanized steel housing with a glass window and brass sensor components, which are susceptible to corrosion and chemical attack by aggressive media. A stainless steel (SS) version is offered with improved durability and IP65 dust-tight protection; however, suitability for corrosive media depends on the specific chemical aggressiveness, temperature and concentration. Recommendation: For aggressive or corrosive media choose the stainless steel SS version and confirm chemical compatibility of all wetted parts (sensor/brass vs. stainless grade) with the process fluid. If long-term resistance is required, consider instruments with appropriate corrosion-resistant materials (e.g., specific stainless grades, Hastelloy, duplex) and verify seals and gaskets. Ensure at least half the sensor length can be immersed and consult the manufacturer for compatibility and any special protective coatings or isolating thermowells.

Thermometer bimetallic with sensor rear, Diameter 63 mm and 100 mm, type TB63T, TB100T

All products, Other measuring instruments/

Additional information

Material	CS – steel (cast iron)

Thermometer bimetallic with sensor rear made in accordance with the standard EN 13190 for measuring temperatures liquids, par and gases in equipment industrial, in particular district-heating. is characterized quick reaction on changes temperatures and ease reading thanks to legible divider. thermometer mounted for devices using screw-in cover with thread external, protecting A sensor and enabling replacement thermometer without disturbing process – thermometer is pressed in cover sensor. On impact the medium o measured temperature should be exposed minimum 50% length sensor. available also in made stainless – version SS (housing dust-tight – IP65). Material: steel galvanized (housing), glass (sight glass), brass (A sensor and A guard). Diameter nominal: 63 mm, 100 mm. degree protection housing: IP41. Class accuracy: 2. length sensor: 50 mm, 80 mm, 100 mm. strength cover: 160 bar. Connection cover: 1/2″ BSP female. range measuring: od -30°C up to +400°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CT-TB100T-050-050	Termometr bimetaliczny TB100T, A sensor 50 mm, range -30°C ÷ 50°C	-	-	In stock	Enquiry
CT-TB100T-050-060	Termometr bimetaliczny TB100T, A sensor 50 mm, range -20°C ÷ 60°C	-	-	In stock	Enquiry
CT-TB100T-050-120	Termometr bimetaliczny TB100T, A sensor 50 mm, range 0°C ÷ 120°C	-	-	In stock	Enquiry
CT-TB100T-050-200	Termometr bimetaliczny TB100T, A sensor 50 mm, range 0°C ÷ 200°C	-	-	In stock	Enquiry
CT-TB100T-050-250	Termometr bimetaliczny TB100T, A sensor 50 mm, range 0°C ÷ 250°C	-	-	In stock	Enquiry
CT-TB100T-080-050	Termometr bimetaliczny TB100T, A sensor 80 mm, range -30°C ÷ 50°C	-	-	In stock	Enquiry
CT-TB100T-080-060	Termometr bimetaliczny TB100T, A sensor 80 mm, range -20°C ÷ 60°C	-	-	In stock	Enquiry
CT-TB100T-080-120	Termometr bimetaliczny TB100T, A sensor 80 mm, range 0°C ÷ 120°C	-	-	In stock	Enquiry
CT-TB100T-080-200	Termometr bimetaliczny TB100T, A sensor 80 mm, range 0°C ÷ 200°C	-	-	In stock	Enquiry
CT-TB100T-080-250	Termometr bimetaliczny TB100T, A sensor 80 mm, range 0°C ÷ 250°C	-	-	In stock	Enquiry
CT-TB100T-100-050	Termometr bimetaliczny TB100T, A sensor 100 mm, range -30°C ÷ 50°C	-	-	In stock	Enquiry
CT-TB100T-100-060	Termometr bimetaliczny TB100T, A sensor 100 mm, range -20°C ÷ 60°C	-	-	In stock	Enquiry
CT-TB63T-050-050	Termometr bimetaliczny TB63T, A sensor 50 mm, range -30°C ÷ 50°C	-	-	In stock	Enquiry
CT-TB63T-050-060	Termometr bimetaliczny TB63T, A sensor 50 mm, range -20°C ÷ 60°C	-	-	In stock	Enquiry
CT-TB63T-050-120	Termometr bimetaliczny TB63T, A sensor 50 mm, range 0°C ÷ 120°C	-	-	In stock	Enquiry
CT-TB63T-050-200	Termometr bimetaliczny TB63T, A sensor 50 mm, range 0°C ÷ 200°C	-	-	In stock	Enquiry
CT-TB63T-050-250	Termometr bimetaliczny TB63T, A sensor 50 mm, range 0°C ÷ 250°C	-	-	In stock	Enquiry
CT-TB63T-080-050	Termometr bimetaliczny TB63T, A sensor 80 mm, range -30°C ÷ 50°C	-	-	In stock	Enquiry
CT-TB63T-080-060	Termometr bimetaliczny TB63T, A sensor 80 mm, range -20°C ÷ 60°C	-	-	In stock	Enquiry
CT-TB63T-080-120	Termometr bimetaliczny TB63T, A sensor 80 mm, range 0°C ÷ 120°C	-	-	In stock	Enquiry
CT-TB63T-080-200	Termometr bimetaliczny TB63T, A sensor 80 mm, range 0°C ÷ 200°C	-	-	In stock	Enquiry
CT-TB63T-080-250	Termometr bimetaliczny TB63T, A sensor 80 mm, range 0°C ÷ 250°C	-	-	In stock	Enquiry
CT-TB63T-100-050	Termometr bimetaliczny TB63T, A sensor 100 mm, range -30°C ÷ 50°C	-	-	In stock	Enquiry
CT-TB63T-100-060	Termometr bimetaliczny TB63T, A sensor 100 mm, range -20°C ÷ 60°C	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Thermometer bimetallic with sensor rear made in accordance with the standard EN 13190 for measuring temperatures liquids, par and gases in equipment industrial, in particular district-heating. is characterized quick reaction on changes temperatures and ease reading thanks to legible divider. thermometer mounted for devices using screw-in cover with thread external, protecting A sensor and enabling replacement thermometer without disturbing process – thermometer is pressed in cover sensor. On impact the medium o measured temperature should be exposed minimum 50% length sensor. available also in made stainless – version SS (housing dust-tight – IP65). Material: steel galvanized (housing), glass (sight glass), brass (A sensor and A guard). Diameter nominal: 63 mm, 100 mm. degree protection housing: IP41. Class accuracy: 2. length sensor: 50 mm, 80 mm, 100 mm. strength cover: 160 bar. Connection cover: 1/2″ BSP female. range measuring: od -30°C up to +400°C.