Is the Black Antistatic PTFE Hose, Smooth Bore, FDA Approved, Flame Retardant, Chemical Resistant, EN12115, -200°C to +260°C, 5.5–12 bar suitable for pumping conductive or low-resistivity liquids?

Yes — the Black Antistatic PTFE Hose, Smooth Bore, FDA Approved, Flame Retardant, Chemical Resistant, EN12115, -200°C to +260°C, 5.5–12 bar Format is suitable for pumping conductive or low-resistivity liquids only under conditions where the liquid’s conductivity/resistivity is compatible with the hose’s controlled conductivity. The hose contains up to 2.5% carbon black to achieve antistatic properties and meets EN12115 by providing a resistance below 10⁶ Ω/m, ensuring effective dissipation of electrostatic charge. That makes it appropriate for liquids that might generate static but are not highly conductive beyond the hose’s dissipation capability. However, for strongly conductive liquids or applications requiring definite electrical grounding paths, additional measures (grounding/earthing and system-level conductivity controls) should be implemented and verified. For critical safety or specific conductivity thresholds, confirm with the manufacturer or perform application-specific testing to ensure compliance with your process and safety standards.

Can the Black Antistatic PTFE Hose, Smooth Bore, FDA Approved, Flame Retardant, Chemical Resistant, EN12115, -200°C to +260°C, 5.5–12 bar be used for grounding and bonding during transfer of flammable solvents to prevent static ignition?

Yes — the Black Antistatic PTFE Hose, Smooth Bore, FDA Approved, Flame Retardant, Chemical Resistant, EN12115, -200°C to +260°C, 5.5–12 bar Format is suitable for grounding and bonding during transfer of flammable solvents to reduce risk of static ignition, with important conditions. Why it’s suitable: - Antistatic formulation (up to 2.5% carbon black) provides controlled conductivity and dissipates electrostatic charge. - Meets EN12115 requirement (resistance below 10^6 Ω/m), indicating effective leak-path for charge removal. - Flame-retardant (UL94 V-0) and high oxygen index add safety in flammable environments. - Chemically resistant PTFE and wide temperature/pressure ratings support typical solvent transfer conditions. Important conditions and limitations: - Grounding/bonding requires external conductive connections: hose conductivity alone does not substitute for proper grounding clamps, braided/metal couplings or conductive fittings and verified continuity to earth. - Use compatible conductive couplings and ensure hose-to-fitting contact is maintained (avoid insulating layers, non-conductive gaskets). - Verify system resistance and continuity regularly and before operations; follow industry best practices and site procedures for static control. - Confirm suitability for the specific solvent, transfer method and regulatory/safety requirements; for installations with very low ignition energy or special hazards, consult a qualified safety engineer. Conclusion: The Black Antistatic PTFE Hose, Smooth Bore, FDA Approved, Flame Retardant, Chemical Resistant, EN12115, -200°C to +260°C, 5.5–12 bar Format provides the material properties needed for grounding and bonding in solvent transfer, provided it is installed with proper conductive fittings, grounding connections and validated procedures.

Smooth antistatic hose PTFE PTFE AS

All products, PTFE hoses/

Additional information

Material	PTFE – teflon and similar
Maximum operating temperature [°C]	260
Minimum operating temperature [°C]	-200
Vacuum resistance	no
Standard length [m]	50

Light hose smooth with PTFE o properties antistatic and excellent resistance chemical. properties conducting and dissipation charges electric obtained are through additive for 2.5% carbon – carbon black (carbon black) – PTFE AS. allows to on reduction resistance material hose and meeting requirements standards EN12115 demanding resistance between ends hose smaller od 10 6 Ω/m. hose intended is in particular for aggressive chemical substances non-conductive e.g. solvents organic, which Flow rate in standard hose PTFE can cause accumulation charges electric and related with this hazard. high cleanliness and distribution additives carbon in PTFE ensures compliance with FDA 21 CFR 178.3297 in the scope materials approved for time contact with food. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). use high quality fittings push-in is possible. factor safety n=4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material: antistatic PTFE (teflon), black. hardness Shore (D): 60. Working pressure: od 5.5 up to 12 bar. Operating temperature: od -200°C up to +260°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
WT-PTFE-AS-04X06	Hose PTFE 4x6 mm, antistatic, black	4	12	In stock	Enquiry
WT-PTFE-AS-06X08	Hose PTFE 6x8 mm, antistatic, black	6	8.7	In stock	Enquiry
WT-PTFE-AS-08X10	Hose PTFE 8x10 mm, antistatic, black	8	7	In stock	Enquiry
WT-PTFE-AS-10X12	Hose PTFE 10x12 mm, antistatic, black	10	5.5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Light hose smooth with PTFE o properties antistatic and excellent resistance chemical. properties conducting and dissipation charges electric obtained are through additive for 2.5% carbon – carbon black (carbon black) – PTFE AS. allows to on reduction resistance material hose and meeting requirements standards EN12115 demanding resistance between ends hose smaller od 10 6 Ω/m. hose intended is in particular for aggressive chemical substances non-conductive e.g. solvents organic, which Flow rate in standard hose PTFE can cause accumulation charges electric and related with this hazard. high cleanliness and distribution additives carbon in PTFE ensures compliance with FDA 21 CFR 178.3297 in the scope materials approved for time contact with food. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). use high quality fittings push-in is possible. factor safety n=4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material: antistatic PTFE (teflon), black. hardness Shore (D): 60. Working pressure: od 5.5 up to 12 bar. Operating temperature: od -200°C up to +260°C.

Additional information

Material	PTFE – teflon and similar
Maximum operating temperature [°C]	260
Minimum operating temperature [°C]	-200
Vacuum resistance	no
Standard length [m]	50