Is the Brass Quick Coupling Plug with Hose End, NITTO KOHKI HI CUPLA compatible with standard garden hoses and fittings?

The Brass Quick Coupling Plug with Hose End, NITTO KOHKI HI CUPLA is designed for water installations and offers robust brass construction, high vibration resistance and a working pressure up to 10 bar. However, compatibility with standard garden hoses and fittings depends on the hose end thread and diameter you have. The HI CUPLA is offered in sizes (1", 3/4", 1/2", 3/8", 1/4") with corresponding high flow capacities; if your garden hose uses one of these nominal sizes and the same thread type (typically BSP/G thread or NPT depending on region), it can be directly compatible. If your garden hose uses a different thread or barb fitting, you may need an adapter or a matching hose end coupling to ensure a proper, leak‑free connection. Check your hose’s thread standard and diameter against the HI CUPLA size specification before fitting.

Can the Brass Quick Coupling Plug with Hose End, NITTO KOHKI HI CUPLA withstand continuous outdoor exposure and resist corrosion in hard water conditions?

The Brass Quick Coupling Plug with Hose End, NITTO KOHKI HI CUPLA is manufactured from high-quality brass, which provides strong general corrosion resistance and excellent durability, including good resistance to vibration and mechanical wear. These properties make it suitable for outdoor water installations and demanding professional use. However, continuous outdoor exposure and hard water conditions introduce stresses that brass alone may not fully withstand indefinitely. Hard water (high mineral content) can cause scale buildup on internal passages and fittings, reducing flow over time and potentially accelerating wear in moving parts. Prolonged exposure to very aggressive environments (salty air, acidic rain, or prolonged immersion) can also promote dezincification or surface corrosion in brass alloys unless the specific alloy is dezincification-resistant. Given the product description (up to 10 bar working pressure, high flow rates, robust brass construction), the HI CUPLA plug should perform reliably outdoors and in typical hard-water applications for extended periods, especially with routine maintenance: periodic cleaning to remove scale, inspection of seals, and protection from direct salt spray or prolonged immersion. For highly aggressive environments or where regulatory requirements demand, consider specifying a dezincification-resistant brass or alternative corrosion-resistant materials, protective coatings, or more frequent maintenance.

Plug quick coupling with fitting for hose, NITTO KOHKI HI CUPLA, brass

All products, General-purpose low-pressure quick couplings/

Additional information

Material	B – brass (bronze)

Plug without valve Nitto Kohki series HI CUPLA with fitting for hose o excellent durability and resistance to vibration. intended for installation water. Material: brass. Working pressure: 10 bar. flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NK-20PH-B	Quick coupling plug HI CUPLA, for hose 1/4", brass	-	10	In stock	Enquiry
NK-30PH-B	Quick coupling plug HI CUPLA, for hose 3/8", brass	-	10	In stock	Enquiry
NK-400PH-B	Quick coupling plug HI CUPLA, for hose 1/2", brass	-	10	In stock	Enquiry
NK-40PH-B	Quick coupling plug HI CUPLA, for hose 1/2", brass	-	10	In stock	Enquiry
NK-600PH-B	Quick coupling plug HI CUPLA, for hose 3/4", brass	-	10	In stock	Enquiry
NK-800PH-B	Quick coupling plug HI CUPLA, for hose 1", brass	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Plug without valve Nitto Kohki series HI CUPLA with fitting for hose o excellent durability and resistance to vibration. intended for installation water. Material: brass. Working pressure: 10 bar. flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.