Is the Brass T-Piece Connector "T" with BSP Female/Male/Female, Type EW suitable for use with potable water systems?

Based on the provided description, the Brass T-Piece Connector "T" with BSP Female/Male/Female, Type EW is made of high‑quality brass with good corrosion resistance and robust construction, and it is rated for pressures up to 63 bar and temperatures from −10°C to +90°C. However, the description does not explicitly state certification or compliance with potable water standards (e.g., WRAS, NSF/ANSI 61, ACS) nor does it mention lead content or suitability for drinking water. Therefore, from the given information alone it cannot be confirmed as suitable for potable water systems. To determine suitability, request manufacturer confirmation or documentation that the Brass T-Piece Connector "T" with BSP Female/Male/Female, Type EW meets relevant potable‑water certifications and lead‑free requirements for your region.

Can the Brass T-Piece Connector "T" with BSP Female/Male/Female, Type EW withstand exposure to saline or coastal environments without accelerated corrosion?

The Brass T-Piece Connector "T" with BSP Female/Male/Female, Type EW offers good general corrosion resistance due to its high‑quality brass construction and is suitable for many industrial and commercial applications. However, brass is not fully immune to aggressive chloride environments: prolonged exposure to saline or coastal atmospheres can promote dezincification and stress corrosion in some brass alloys, accelerating corrosion compared with fresh‑water or indoor conditions. If the connector will face occasional, short‑term exposure to salty air or splash, it will generally perform acceptably. For continuous immersion in seawater, constant splash, or very high‑salinity coastal atmospheres, additional protection is recommended — for example, use of dezincification‑resistant (DZR) brass, a protective coating, sacrificial anodes, or selecting a more corrosion‑resistant material such as stainless steel. Also consider regular inspection and maintenance schedules to detect early corrosion. In summary: Type EW brass fitting resists corrosion under many conditions but may experience accelerated degradation in persistent saline/coastal exposure unless DZR brass, coatings, or alternative materials are used.

Tee “T” with a female BSP thread/BSP male/BSP female, brass, type EW

Additional information

Material	B – brass (bronze)

Tee “T” brass with 2 x thread internal BSP and 1 x thread external BSP. Material: brass. Working pressure: up to 63 bar. Operating temperature: od -10°C up to +90°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EW-MS-18562	Tee T with female/male/female 1/8" BSP, brass	-	63	In stock	Enquiry
EW-MS-18563	Tee T with female/male/female 1/4" BSP, brass	-	63	In stock	Enquiry
EW-MS-18565	Tee T with female/male/female 3/8" BSP, brass	-	63	In stock	Enquiry
EW-MS-18567	Tee T with female/male/female 1/2" BSP, brass	-	63	In stock	Enquiry
EW-MS-18568	Tee T with female/male/female 3/4" BSP, brass	-	63	In stock	Enquiry
EW-MS-18569	Tee T with female/male/female 1" BSP, brass	-	63	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Tee “T” brass with 2 x thread internal BSP and 1 x thread external BSP. Material: brass. Working pressure: up to 63 bar. Operating temperature: od -10°C up to +90°C.