Is the BSP Male Threaded End, 60° Cone, Brass Fitting, Type SA suitable for potable water and food-grade applications?

BSP Male Threaded End, 60° Cone, Brass Fitting, Type SA is manufactured from high-quality brass and described as suitable for sanitary installations, which suggests good corrosion resistance and general suitability for many fluid applications. However, the provided description does not explicitly state certifications, material composition (e.g., dezincification-resistant brass), or compliance with potable water and food-contact standards (such as NSF/ANSI 61, WRAS, ACS, or FDA/BfR approvals). Therefore: if you need the fitting for potable water or food-grade applications, confirm with the manufacturer or supplier that the specific brass alloy and surface treatments are certified for drinking water and food contact and that any seals or hoses used with it are also certified. Without explicit certification information, it should not be assumed safe for potable water or food-grade use.

Does the BSP Male Threaded End, 60° Cone, Brass Fitting, Type SA withstand exposure to common automotive fuels and oils without degradation?

Yes. The BSP Male Threaded End, 60° Cone, Brass Fitting, Type SA is suitable for exposure to common automotive fuels and oils without significant degradation. Made from high-quality brass, it offers good corrosion resistance and chemical compatibility with typical hydrocarbon-based fuels, engine oils, and lubricants used in automotive applications. Its intended use in fuel transfer systems and low-pressure hose assemblies further supports its suitability for such media. Caveats: - Compatibility depends on specific fuel/oil formulations (e.g., ethanol-blended fuels, biodiesel blends, or aggressive additives can affect some materials). Brass generally tolerates gasoline, diesel, and most mineral oils, but compatibility should be verified for high concentrations of ethanol, methanol, or certain corrosive additives. - The fitting is designed for low-pressure applications and appropriate hose types (rubber, non-reinforced plastic, textile-reinforced with steel braid). Ensure operating pressures, temperatures, and hose materials are compatible with both the fitting and the fluid. - For long-term exposure or critical systems, confirm compatibility with the exact fluid specifications and consider periodic inspection. In typical automotive fuel and oil environments, the BSP Male Threaded End, 60° Cone, Brass Fitting, Type SA will perform reliably without degradation.

A fitting with thread external BSP, 60° cone, brass, type SA

All products, Low-pressure fittings and adapters/

Additional information

Material	B – brass (bronze)

A fitting type SA with thread external BSP, sealing 60° cone, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EC-110304	Fitting SA 1/8" BSP male, 60° cone, (hose 4.5 mm)	6	30	In stock	Enquiry
EC-110305	Fitting SA 1/8" BSP male, 60° cone, (hose 5.5 mm)	5	30	In stock	Enquiry
EC-110306	Fitting SA 1/4" BSP male, 60° cone, (hose 5.5 mm)	6	30	In stock	Enquiry
EC-110308	Fitting SA 1/4" BSP male, 60° cone, (hose 7.5 mm)	8	30	In stock	Enquiry
EC-110310	Fitting SA 3/8" BSP male, 60° cone, (hose 9.5 mm)	10	30	In stock	Enquiry
EC-110312	Fitting SA 1/2" BSP male, 60° cone, (hose 11.5 mm)	12	30	In stock	Enquiry
EC-110315	Fitting SA 1/2" BSP male, 60° cone, (hose 14.5 mm)	14	30	In stock	Enquiry
EC-110316	Fitting SA 3/8" BSP male, 60° cone, (hose 5.5 mm)	6	30	In stock	Enquiry
EC-110317	Fitting SA 3/8" BSP male, 60° cone, (hose 7.5 mm)	8	30	In stock	Enquiry
EC-110331	Fitting SA 1/4" BSP male, 60° cone, (hose 10 mm)	10	30	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting type SA with thread external BSP, sealing 60° cone, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: brass.