Is the CAMLOCK A Brass Connector Plug with Female Thread compatible with standard BSP-threaded hoses and fittings under 10 bar working pressure?

Yes. The CAMLOCK A Brass Connector Plug with Female Thread Format is compatible with standard BSP-threaded hoses and fittings. It features an internal BSP thread manufactured to the MIL-C-27487 (A-A-59326) specification, is made of high-quality brass, and is rated for working pressures up to 10 bar (dependent on size). This makes it suitable for secure, leak-free connections in typical industrial and petrochemical applications where BSP threads and pressures ≤10 bar are used.

Can the CAMLOCK A Brass Connector Plug with Female Thread withstand exposure to common petrochemical solvents and acids without accelerated corrosion or seal failure?

CAMLOCK A Brass Connector Plug with Female Thread Format: Generally resistant but not universally immune. High‑quality brass (commonly CZ121/CW614N) used in these MIL‑C‑27487–compliant camlock A fittings offers good corrosion resistance and mechanical strength, and is routinely specified in petrochemical applications for that reason. It will tolerate many hydrocarbons, light solvents and mild acids without rapid corrosion or seal failure at typical operating pressures (up to 10 bar). However, brass is susceptible to dezincification, stress corrosion and accelerated attack from certain media: - Strong acids (e.g., concentrated hydrochloric, sulfuric, nitric acids) and strong oxidizers can cause rapid corrosion. - Ammonia, some amine solutions and caustic alkalis can promote dezincification or embrittlement. - Chlorinated hydrocarbons and bromides/iodides may accelerate corrosion in some conditions. - High‑temperature exposure, sustained pressure, or presence of corrosive impurities increases risk. Seals and gaskets (material unspecified here) are equally critical: elastomers like NBR, EPDM, FKM, etc., have very different chemical compatibilities. Failure risk depends on seal compound, temperature and exposure time. Recommendation: For specific petrochemical solvents or acidic streams, cross‑check the exact fluid, concentration, temperature and seal material against brass and elastomer compatibility charts, or request supplier’s chemical resistance data. For highly corrosive or oxidizing media, consider alternative materials (stainless steel duplex, bronze with dezincification resistance, or appropriate lining) to avoid accelerated corrosion or seal failure.

CAMLOCK A Brass Connector Plug with Female Thread

Additional information

Material	B – brass (bronze)

The CAMLOCK A connector with internal BSP thread, manufactured in compliance with the American military standard MIL-C-27487 (A-A-59326), is a reliable and versatile solution designed for secure and efficient transfer applications. Widely used in the petrochemical sector, it ensures safe and leak-free connections even in demanding operating conditions. Produced exclusively by trusted suppliers, each connector meets strict quality requirements, guaranteeing durability and consistent performance. With a working pressure of up to 10 bar, depending on the connector size, it provides flexibility across a wide range of industrial processes. Made of high-quality brass, the CAMLOCK A connector combines strength, corrosion resistance, and long service life, making it an excellent choice for companies seeking dependable equipment that supports smooth operations and minimizes downtime.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-A-050-B	CAMLOCK A 1/2" connector, brass	-	9	In stock	Enquiry
AC-A-050-BX	CAMLOCK A 1/2" connector, brass	-	9	In stock	Enquiry
AC-A-075-B	CAMLOCK A 3/4" connector, brass	-	10	In stock	Enquiry
AC-A-075-BX	CAMLOCK A 3/4" connector, brass	-	10	In stock	Enquiry
AC-A-100-B	CAMLOCK A 1" connector, brass	-	10	In stock	Enquiry
AC-A-100-BX	CAMLOCK A 1" connector, brass	-	10	In stock	Enquiry
AC-A-125-B	CAMLOCK A 1.1/4" brass connector	-	10	In stock	Enquiry
AC-A-125-BX	CAMLOCK A 1.1/4" brass connector	-	10	In stock	Enquiry
AC-A-150-B	CAMLOCK A 1.1/2" brass connector	-	10	In stock	Enquiry
AC-A-150-BX	CAMLOCK A 1.1/2" connector, brass	-	10	In stock	Enquiry
AC-A-200-B	CAMLOCK A 2" brass connector	-	10	In stock	Enquiry
AC-A-200-BX	CAMLOCK A 2" connector, brass	-	10	In stock	Enquiry
AC-A-250-B	CAMLOCK A 2.1/2" brass connector	-	10	In stock	Enquiry
AC-A-250-BX	CAMLOCK A 2.1/2" connector, brass	-	10	In stock	Enquiry
AC-A-300-B	CAMLOCK A 3" brass connector	-	10	In stock	Enquiry
AC-A-300-BX	CAMLOCK A 3" connector, brass	-	10	In stock	Enquiry
AC-A-400-B	CAMLOCK A 4" brass connector	-	10	In stock	Enquiry
AC-A-400-BX	CAMLOCK A 4" connector, brass	-	10	In stock	Enquiry
AC-A-500-B	CAMLOCK A 5" brass connector	-	5	In stock	Enquiry
AC-A-500-BX	CAMLOCK A 5" connector, brass	-	5	In stock	Enquiry
AC-A-600-B	CAMLOCK A 6" brass connector	-	5	In stock	Enquiry
AC-A-600-BX	CAMLOCK A 6" connector, brass	-	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The CAMLOCK A connector with internal BSP thread, manufactured in compliance with the American military standard MIL-C-27487 (A-A-59326), is a reliable and versatile solution designed for secure and efficient transfer applications. Widely used in the petrochemical sector, it ensures safe and leak-free connections even in demanding operating conditions. Produced exclusively by trusted suppliers, each connector meets strict quality requirements, guaranteeing durability and consistent performance. With a working pressure of up to 10 bar, depending on the connector size, it provides flexibility across a wide range of industrial processes. Made of high-quality brass, the CAMLOCK A connector combines strength, corrosion resistance, and long service life, making it an excellent choice for companies seeking dependable equipment that supports smooth operations and minimizes downtime.