Is the PVDF Cap with GZ BSP Thread, 3F Series compatible with media at temperatures above 100°C and pressures up to 10 bar?

The PVDF Cap with GZ BSP Thread, 3F Series is rated for working pressures up to 10 bar, so it is compatible with media at pressures up to that limit. However, PVDF (polyvinylidene fluoride) typically has a maximum continuous service temperature around 120–150°C depending on formulation and installation conditions. Since the product description does not specify an exact maximum temperature, short-term exposure above 100°C may be acceptable in many PVDF grades, but continuous use at temperatures above 100°C should be confirmed with the manufacturer’s specific temperature rating and chemical compatibility data for the intended media. In summary: pressure compatibility up to 10 bar is confirmed; temperature compatibility above 100°C is likely for PVDF but must be validated against the manufacturer’s specified maximum service temperature and the chemical/operating conditions.

Can the PVDF Cap with GZ BSP Thread, 3F Series be autoclaved or sterilized without degrading its sealing performance?

PVDF Cap with GZ BSP Thread, 3F Series can generally be autoclaved or sterilized, but with caveats. PVDF (polyvinylidene fluoride) offers excellent chemical and thermal resistance—it withstands typical autoclave temperatures (121°C) and is commonly used in laboratory and medical settings for sterilizable components. The product description indicates high durability, chemical resistance, and suitability for laboratory, medical, pharmaceutical and food applications, which supports its compatibility with standard steam sterilization. However, factors that affect sealing performance after sterilization include: - Repeated autoclave cycles: frequent high-temperature cycles may gradually affect dimensional tolerances or stress-relief of the polymer, potentially impacting the seal over long-term repeated use. - Pressure/temperature profile: autoclaving above recommended conditions or rapid cooling could induce distortion. - Absence of gasket: PVDF Cap with GZ BSP Thread, 3F Series is described as having no gasket; its sealing relies on precise thread fit and material elasticity. Sterilization is less likely to degrade a metal gasket, but with no gasket, any change in thread geometry or surface finish could reduce sealing effectiveness. - Chemical exposure: residues or aggressive sterilants used alongside heat may affect long-term surface integrity. Recommendation: Autoclave at standard conditions (e.g., 121°C, appropriate cycle time) and inspect caps periodically for deformation, thread wear, or leakage. For critical applications, validate sealing performance after intended sterilization cycles or consult the manufacturer for specific autoclave cycle limits and lifetime guidance.

PVDF Cap with GZ BSP Thread, 3F Series

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

The Internal Threaded Plug BSP, series 3F type EM, is a versatile and reliable component designed to meet the demanding requirements of modern industries. Manufactured from high-quality polypropylene or polyvinylidene fluoride, it ensures excellent durability, chemical resistance, and long-term performance even in challenging environments. With a working pressure of up to 10 bar, this plug provides secure and efficient sealing, making it an ideal choice for applications in laboratories, medical facilities, as well as the pharmaceutical, chemical, and food sectors. Its precise engineering guarantees compatibility with a wide range of systems, while the absence of a gasket allows for flexible use depending on specific installation needs. This solution combines functionality with safety, offering professionals a dependable product that supports smooth operations and consistent results across critical processes.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-3F130G12PP	Plug (series 3F) with GZ BSP 1/2", polypropylene	-	10	In stock	Enquiry
EM-3F130G12PV	Plug (series 3F) with GZ BSP 1/2", PVDF	-	10	In stock	Enquiry
EM-3F130G14PP	Plug (series 3F) with GZ BSP 1/4", polypropylene	-	10	In stock	Enquiry
EM-3F130G14PV	Plug (series 3F) with GZ BSP 1/4", PVDF	-	10	In stock	Enquiry
EM-3F130G18PP	Plug (series 3F) with GZ BSP 1/8", polypropylene	-	10	In stock	Enquiry
EM-3F130G18PV	Plug (series 3F) with GZ BSP 1/8", PVDF	-	10	In stock	Enquiry
EM-3F130G34PP	Plug (series 3F) with GZ BSP 3/4", polypropylene	-	10	In stock	Enquiry
EM-3F130G38PP	Plug (series 3F) with GZ BSP 3/8", polypropylene	-	10	In stock	Enquiry
EM-3F130G38PV	Plug (series 3F) with GZ BSP 3/8", PVDF	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The Internal Threaded Plug BSP, series 3F type EM, is a versatile and reliable component designed to meet the demanding requirements of modern industries. Manufactured from high-quality polypropylene or polyvinylidene fluoride, it ensures excellent durability, chemical resistance, and long-term performance even in challenging environments. With a working pressure of up to 10 bar, this plug provides secure and efficient sealing, making it an ideal choice for applications in laboratories, medical facilities, as well as the pharmaceutical, chemical, and food sectors. Its precise engineering guarantees compatibility with a wide range of systems, while the absence of a gasket allows for flexible use depending on specific installation needs. This solution combines functionality with safety, offering professionals a dependable product that supports smooth operations and consistent results across critical processes.