Is the SAE 6000 Supercat 45° Flange End, Type ZSK313, Carbon Steel compatible with crimping sleeves for high‑pressure hydraulic hoses?

Yes. The SAE 6000 Supercat 45° Flange End, Type ZSK313, Carbon Steel is compatible with crimping sleeves for high‑pressure hydraulic hoses. Its precise 45° geometry and robust carbon steel construction, plus galvanized corrosion protection, are specifically engineered to allow secure clamping when used with a crimping sleeve matched to the hose type. When the correct sleeve and crimping parameters for the specific hose are used, the assembly achieves a tight, leak‑free connection suitable for high‑pressure hydraulic service. Ensure you select the proper sleeve size/material and follow the hose and fitting manufacturer's crimping specifications and industry standards for safe, reliable performance.

Can the SAE 6000 Supercat 45° Flange End, Type ZSK313, Carbon Steel be used in corrosive or marine environments without additional protective coatings?

No. The SAE 6000 Supercat 45° Flange End, Type ZSK313, Carbon Steel is supplied with a durable galvanized coating that provides good general corrosion resistance and protection in many industrial environments. However, galvanized carbon steel is not sufficient for prolonged exposure to highly corrosive atmospheres (acidic or alkaline chemical environments), continuous salt‑water splash, immersion, or marine/offshore conditions where chloride attack and accelerated corrosion occur. For those applications additional protection is recommended — e.g., thicker specialized coatings (epoxy, polyurethane), stainless steel materials, cathodic protection, or compatible corrosion‑resistant plating — plus appropriate sealing and maintenance. Specify the exact service conditions to select the correct protective measure.

A fitting flange SAE 6000 SUPERCAT 45°, type ZSK313, steel carbon

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

A fitting flange SAE 6000 SUPERCAT (SFS), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZSK313-12-12	Fitting flange 45° SAE 3/4", hose 3/4" SUPERCAT	20	-	In stock	Enquiry
TI-ZSK313-16-12	Fitting flange 45° SAE 1", hose 3/4" SUPERCAT	20	-	In stock	Enquiry
TI-ZSK313-16-16	Fitting flange 45 °SAE 1", hose 1" SUPERCAT	25	-	In stock	Enquiry
TI-ZSK313-20-16	Fitting flange 45° SAE 1.1/4", hose 1" SUPERCAT	25	-	In stock	Enquiry
TI-ZSK313-20-20	Fitting flange 45° SAE 1.1/4", hose 1.1/4" SUPERCAT	32	-	In stock	Enquiry
TI-ZSK313-24-20	Fitting flange 45° SAE 1.1/2", hose 1.1/4" SUPERCAT	32	-	In stock	Enquiry
TI-ZSK313-24-24	Fitting flange 45° SAE 1.1/2", hose 1.1/2" SUPERCAT	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting flange SAE 6000 SUPERCAT (SFS), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.