What are the recommended maintenance intervals for the Walterscheid™ GE-ME Screw Connection, Carbon Steel, to ensure long-term sealing performance and corrosion protection?

Recommended maintenance intervals for Walterscheid™ GE-ME Screw Connection, Carbon Steel - Initial inspection: after first 50–100 operating hours (or first month) to verify correct installation, seal seating and coating condition. - Routine inspections: every 3–6 months (or every 500–1,000 operating hours) — check for leaks, seal compression, thread integrity and any corrosion or coating damage. - Preventive maintenance: annually (or every 2,000–4,000 operating hours) — disassemble joints as required, clean mating surfaces, inspect elastomer rectangular seal for hardening, cuts or extrusion, replace seals if any wear or deformation is present; inspect threads for wear or galling and replace components showing significant damage. - Re-coating/corrosion protection: every 2–3 years depending on operating environment; in highly corrosive or outdoor applications, shorten to 6–12 months. Touch-up or reapply protective measures if Guardian Seal™ coating is compromised. - Replacement interval: replace seals at least every 2–3 years even if visually acceptable, and replace carbon-steel components showing pitting, significant thread wear, or coating failure to maintain the specified 4:1 safety factor. Notes: tighten to recommended torque and use correct sealing components on every reassembly. Shorten intervals for severe environments (salt spray, chemicals, high humidity, vibration) or critical applications.

How does the Guardian Seal™ galvanic coating on the Walterscheid™ GE-ME Screw Connection, Carbon Steel, enhance corrosion resistance compared to standard coatings?

The Guardian Seal™ galvanic coating on the Walterscheid™ GE-ME Screw Connection, Carbon Steel enhances corrosion resistance beyond standard coatings through several key mechanisms: - Electrochemical protection: As a galvanic (electroplated) layer, Guardian Seal™ forms a uniform, adherent metallic barrier that isolates the carbon steel substrate from corrosive media, preventing direct electrochemical attack that typically causes rust and pitting. - Improved adhesion and uniformity: The controlled galvanic process yields a smoother, more consistent coating than conventional paint or simple plating, eliminating micro-gaps and thin spots where corrosion can initiate. - Sacrificial and barrier effects: Depending on its composition, the coating can provide both a physical barrier and sacrificial protection — corroding preferentially where exposed, thus preserving the underlying steel and extending component life. - Enhanced wear and chemical resistance: The Guardian Seal™ finish is engineered to resist mechanical wear and chemical exposure common in hydraulic systems, reducing breakdown of the protective layer under service conditions and maintaining sealing surfaces and thread integrity. - Longer service intervals and reliability: By markedly slowing corrosion and wear, the coating reduces maintenance frequency and risk of failure in demanding environments, aligning with the GE-ME connection’s robust design and 4:1 safety factor. Combined with the GE-ME’s precision geometry and elastomer seal, Guardian Seal™ delivers a durable, long-lasting surface protection that outperforms standard coatings in corrosive and high-wear applications.

Walterscheid™ GE-ME Screw Connection, Carbon Steel

Additional information

Material	CS – steel (cast iron)

The DIN 2353 Eaton Walterscheid™ screw connection, type GE-ME, is a high-performance 24° socket designed with external metric threads on both sides, ensuring reliable sealing in accordance with DIN 3852 type E through an advanced elastomer seal with a rectangular cross-section. Engineered with a robust 4:1 safety factor, this connection is available in both L (light series) and S (heavy series), making it suitable for a wide range of hydraulic and industrial applications where durability and precision are essential. Manufactured from premium carbon steel and protected with the innovative Guardian Seal™ galvanic coating, it offers outstanding resistance to corrosion and wear, significantly extending service life even in demanding environments. This combination of strength, safety, and superior surface protection makes the GE-ME connection an ideal choice for operators seeking long-term reliability, reduced maintenance costs, and optimized system performance.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-GE-06L-ME-10-W	Walterscheid fitting DIN 2353 GE 6L M10x1	-	500	In stock	Enquiry
HD-GE-06S-ME-12-W	Walterscheid fitting DIN 2353 GE 6S M12x1.5	-	800	In stock	Enquiry
HD-GE-08L-ME-12-W	Walterscheid fitting DIN 2353 GE 8L M12x1.5	-	500	In stock	Enquiry
HD-GE-08S-ME-14-W	Walterscheid fitting DIN 2353 GE 8S M14x1.5	-	800	In stock	Enquiry
HD-GE-10L-ME-14-W	Walterscheid fitting DIN 2353 GE 10L M14x1.5	-	500	In stock	Enquiry
HD-GE-10L-ME-18-W	Walterscheid fitting DIN 2353 GE 10L M18x1.5	-	500	In stock	Enquiry
HD-GE-10L-ME-22-W	Walterscheid fitting DIN 2353 GE 10L M22x1.5	-	500	In stock	Enquiry
HD-GE-10S-ME-16-W	Walterscheid fitting DIN 2353 GE 10S M16x1.5	-	800	In stock	Enquiry
HD-GE-12L-ME-16-W	Walterscheid fitting DIN 2353 GE 12L M16x1.5	-	400	In stock	Enquiry
HD-GE-12L-ME-18-W	Walterscheid fitting DIN 2353 GE 12L M18x1.5	-	400	In stock	Enquiry
HD-GE-12L-ME-22-W	Walterscheid fitting DIN 2353 GE 12L M22x1.5	-	400	In stock	Enquiry
HD-GE-12S-ME-18-W	Walterscheid fitting DIN 2353 GE 12S M18x1.5	-	630	In stock	Enquiry
HD-GE-15L-ME-18-W	Walterscheid fitting DIN 2353 GE 15L M18x1.5	-	400	In stock	Enquiry
HD-GE-15L-ME-22-W	Walterscheid fitting DIN 2353 GE 15L M22x1.5	-	400	In stock	Enquiry
HD-GE-16S-ME-22-W	Walterscheid fitting DIN 2353 GE 16S M22x1.5	-	630	In stock	Enquiry
HD-GE-18L-ME-18-W	Walterscheid fitting DIN 2353 GE 18L M18x1.5	-	400	In stock	Enquiry
HD-GE-18L-ME-22-W	Walterscheid fitting DIN 2353 GE 18L M22x1.5	-	400	In stock	Enquiry
HD-GE-20S-ME-27-W	Walterscheid fitting DIN 2353 GE 20S M27x2	-	420	In stock	Enquiry
HD-GE-22L-ME-26-W	Walterscheid fitting DIN 2353 GE 22L M26x1.5	-	250	In stock	Enquiry
HD-GE-25S-ME-33-W	Walterscheid fitting DIN 2353 GE 25S M33x2	-	420	In stock	Enquiry
HD-GE-28L-ME-33-W	Walterscheid fitting DIN 2353 GE 28L M33x2	-	250	In stock	Enquiry
HD-GE-30S-ME-42-W	Walterscheid fitting DIN 2353 GE 30S M42x2	-	420	In stock	Enquiry
HD-GE-35L-ME-42-W	Walterscheid fitting DIN 2353 GE 35L M42x2	-	250	In stock	Enquiry
HD-GE-38S-ME-48-W	Walterscheid fitting DIN 2353 GE 38S M48x2	-	420	In stock	Enquiry
HD-GE-42L-ME-48-W	Walterscheid fitting DIN 2353 GE 42L M48x2	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The DIN 2353 Eaton Walterscheid™ screw connection, type GE-ME, is a high-performance 24° socket designed with external metric threads on both sides, ensuring reliable sealing in accordance with DIN 3852 type E through an advanced elastomer seal with a rectangular cross-section. Engineered with a robust 4:1 safety factor, this connection is available in both L (light series) and S (heavy series), making it suitable for a wide range of hydraulic and industrial applications where durability and precision are essential. Manufactured from premium carbon steel and protected with the innovative Guardian Seal™ galvanic coating, it offers outstanding resistance to corrosion and wear, significantly extending service life even in demanding environments. This combination of strength, safety, and superior surface protection makes the GE-ME connection an ideal choice for operators seeking long-term reliability, reduced maintenance costs, and optimized system performance.