Is the Clamp DIN 3015 Standard, Polyamide, Type 101 suitable for marine environments and resistant to salt corrosion?

Clamp DIN 3015 Standard, Polyamide, Type 101 Format is suitable for marine environments and offers good resistance to salt corrosion, with some caveats. The clamp’s body is made of self‑extinguishing polyamide, which is inherently corrosion‑resistant and not affected by saltwater like metals are. Critical metal parts (screws and plates) are galvanized steel and the base is robust carbon steel; galvanization provides basic protection against corrosion but may be insufficient in very aggressive, continuous salt‑spray or splash zones without additional protection. Temperature performance (‑40°C to +180°C) and the option to weld, bolt, or rail‑mount add to its suitability for demanding installations. For long‑term marine use, consider specifying enhanced corrosion protection for metal parts (e.g., stainless steel fasteners or additional coatings) or consult TUBES INTERNATIONAL® for tailored options and selection support.

Does the Clamp DIN 3015 Standard, Polyamide, Type 101 require special maintenance after exposure to sea spray to maintain performance and appearance?

Clamp DIN 3015 Standard, Polyamide, Type 101 Format does not generally require special maintenance after exposure to sea spray to maintain performance and appearance, provided standard care is applied. The clamp is made from self‑extinguishing polyamide with galvanized steel screws and plates and a robust carbon steel base, offering good resistance in demanding marine environments. To preserve longevity and aesthetics in coastal or offshore conditions, follow these routine measures: - Rinse periodically with fresh water to remove salt deposits and prevent accelerated corrosion on metal parts. - Inspect fasteners, plates and the carbon steel base regularly for surface corrosion or loosening; tighten or replace galvanized screws if corrosion is evident. - For extended service life in highly corrosive or splash‑zone locations, consider additional protective coatings, stainless‑steel fasteners, or sacrificial anodes as preventive options. - Ensure drainage and ventilation to avoid trapped moisture around the clamp. With these straightforward inspections and rinsing, the Clamp DIN 3015 Standard, Polyamide, Type 101 Format will maintain its performance and neat appearance in marine settings.

Clamp DIN 3015 Standard, Polyamide, Type 101

All products, Clamps for hydraulic pipes/

Additional information

Material	P – material (plastic)

The DIN 3015 type 101 clamp with top plate ensures fast, reliable, and visually neat installation of pipes and hoses in both industrial facilities and demanding marine or underground environments. Produced in compliance with the DIN 3015 standard, it offers versatile mounting options: welding the base directly to the structure, bolting, or fixing on a rail. The clamp is available with a profiled interior for secure pipe positioning or with a smooth bore (marked with “H”) for hoses, ensuring optimal fit for different applications. Depending on the size group, the design includes either one or two hexagon head screws, guaranteeing stability and durability. Manufactured from self-extinguishing polyamide with galvanized steel screws and plates, and a robust carbon steel base, the clamp delivers long-lasting performance even under extreme conditions, withstanding temperatures from -40°C to +180°C. To meet specific installation needs, extended plates, rails, and additional fastening elements can be supplied, with expert selection support available from TUBES INTERNATIONAL®. This solution combines safety, efficiency, and professional aesthetics, making it an excellent choice for modern industrial systems.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TC-PA101-006	DIN3015 standard PA clamp for 6 mm pipe	-	-
TC-PA101-008	DIN3015 standard PA clamp for 8 mm pipe	-	-
TC-PA101-010	DIN3015 standard PA clamp for 10 mm pipe	-	-
TC-PA101-012	DIN3015 standard PA clamp for 12 mm pipe	-	-
TC-PA101-106	DIN3015 standard PA clamp for 6 mm pipe	-	-
TC-PA101-106,4	DIN3015 standard PA clamp for 6.4 mm pipe	-	-
TC-PA101-108	DIN3015 standard PA clamp for 8 mm pipe	-	-
TC-PA101-109,5	DIN3015 standard PA clamp for 9.5 mm pipe	-	-
TC-PA101-110	DIN3015 standard PA clamp for 10 mm pipe	-	-
TC-PA101-112	DIN3015 standard PA clamp for 12 mm pipe	-	-
TC-PA101-212,7	DIN3015 standard PA clamp for 12.7 mm pipe	-	-
TC-PA101-213,5	DIN3015 standard PA clamp for 13.5 mm pipe	-	-
TC-PA101-214	DIN3015 standard PA clamp for 14 mm pipe	-	-
TC-PA101-215	DIN3015 standard PA clamp for 15 mm pipe	-	-
TC-PA101-216	DIN3015 standard PA clamp for 16 mm pipe	-	-
TC-PA101-217,2	DIN3015 standard PA clamp for 17.2 mm pipe	-	-
TC-PA101-218	DIN3015 standard PA clamp for 18 mm pipe	-	-
TC-PA101-219	DIN3015 standard PA clamp for 19 mm pipe	-	-
TC-PA101-319	DIN3015 standard PA clamp for 19 mm pipe	-	-
TC-PA101-320	DIN3015 standard PA clamp for 20 mm pipe	-	-
TC-PA101-321,3	DIN3015 standard PA clamp for 21.3 mm pipe	-	-
TC-PA101-322	DIN3015 standard PA clamp for 22 mm pipe	-	-
TC-PA101-325	DIN3015 standard PA clamp for 25 mm pipe	-	-
TC-PA101-325,4	DIN3015 standard PA clamp for 25.4 mm pipe	-	-
TC-PA101-426,9	DIN3015 standard PA clamp for a 26.9 mm pipe	-	-
TC-PA101-428	DIN3015 standard PA clamp for 28 mm pipe	-	-
TC-PA101-430	DIN3015 standard PA clamp for 30 mm pipe	-	-
TC-PA101-432	DIN3015 standard PA clamp for 32 mm pipe	-	-
TC-PA101-532	DIN3015 standard PA clamp for 32 mm pipe	-	-
TC-PA101-533,7	DIN3015 standard PA clamp for 33.7 mm pipe	-	-
TC-PA101-535	DIN3015 standard PA clamp for 35 mm pipe	-	-
TC-PA101-538	DIN3015 standard PA clamp for 38 mm pipe	-	-
TC-PA101-540	DIN3015 standard PA clamp for 40 mm pipe	-	-
TC-PA101-542	DIN3015 standard PA clamp for 42 mm pipe	-	-
TC-PA101-542,4	DIN3015 standard PA clamp for 42.4 mm pipe	-	-
TC-PA101-545	DIN3015 standard PA clamp for 45 mm pipe	-	-
TC-PA101-644,5	DIN3015 standard PA clamp for 44.5 mm pipe	-	-
TC-PA101-648,3	DIN3015 standard PA clamp for 48.3 mm pipe	-	-
TC-PA101-650,8	DIN3015 standard PA clamp for a 50.8 mm pipe	-	-

The DIN 3015 type 101 clamp with top plate ensures fast, reliable, and visually neat installation of pipes and hoses in both industrial facilities and demanding marine or underground environments. Produced in compliance with the DIN 3015 standard, it offers versatile mounting options: welding the base directly to the structure, bolting, or fixing on a rail. The clamp is available with a profiled interior for secure pipe positioning or with a smooth bore (marked with “H”) for hoses, ensuring optimal fit for different applications. Depending on the size group, the design includes either one or two hexagon head screws, guaranteeing stability and durability. Manufactured from self-extinguishing polyamide with galvanized steel screws and plates, and a robust carbon steel base, the clamp delivers long-lasting performance even under extreme conditions, withstanding temperatures from -40°C to +180°C. To meet specific installation needs, extended plates, rails, and additional fastening elements can be supplied, with expert selection support available from TUBES INTERNATIONAL®. This solution combines safety, efficiency, and professional aesthetics, making it an excellent choice for modern industrial systems.