Is the 22 mm Coil for 70 Series Valves, 1/8" & 1/4" Ports, Ø8 Stem certified for use in ATEX Zone 2 hazardous areas?

22 mm Coil for 70 Series Valves, 1/8" & 1/4" Ports, Ø8 Stem: Yes — this coil is certified for use in ATEX Zone 2 hazardous areas. It meets ATEX 94/9 CE requirements and is classified as Group II, Category 3GD, which permits installation in potentially explosive atmospheres corresponding to Zone 2 (gas) and Zone 22 (dust). Additionally, it features insulation class F155, a voltage tolerance of -10% to +15%, and IP65 protection per DIN 40050, supporting safe and reliable operation in demanding industrial environments.

Does the 22 mm Coil for 70 Series Valves, 1/8" & 1/4" Ports, Ø8 Stem require any additional certifications beyond ATEX 94/9 CE for Zone 2 installations?

22 mm Coil for 70 Series Valves, 1/8" & 1/4" Ports, Ø8 Stem Format For Zone 2 installations, the coil is certified to ATEX 94/9/EC as Group II, Category 3GD, which covers use in Zone 2 (gases) and Zone 22 (dust). Beyond ATEX, additional certifications may be required depending on the jurisdiction and the specific site requirements. Common additional approvals to consider: - IECEx certification for international IECEx-accepted conformity in explosive atmospheres. - National equivalents or markings (e.g., UKCA for the UK, TR CU/EAC for Eurasian markets). - Electrical safety and EMC approvals (e.g., CE marking for EMC/LVD where applicable, UL/CSA for North America) if local installations mandate them. - Temperature-class or gas-group documentation matching the installed environment and end-user risk assessment. - RoHS, REACH, or other environmental/compliance declarations if required by purchaser or region. If the installation is solely within an EU context where ATEX declaration is accepted and the equipment’s electrical/EMC requirements are otherwise met, no further explosion-specific certification is typically mandatory for Zone 2. Confirm with the site’s responsible engineer or local authority having jurisdiction to verify any country-specific or customer-imposed certifications.

A coil 22 mm for valves series 70 of size 1/8″ and 1/4″, stem Ø8

All products, Equipment for pneumatic valves/

Additional information

A coil 22 mm for valves series 70 of size 1/8″ and 1/4″, stem Ø8. Insulation class: F155. Voltage tolerance: -10% for +15%. Protection degree: IP65 DIN 40050 with a connector. Compliant with ATEX 94/9 CE, group II, category 3GD.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-W0215000101	A coil 22 mm D8 BA 2W 24V DC (valves 70 series i NAMUR)	-	-	In stock	Enquiry
MW-W0215000111	A coil 22 mm D8 BA 3VA 24V AC 50/60 Hz (valves 70 series i NAMUR)	-	-	In stock	Enquiry
MW-W0215000121	A coil 22 mm D8 BA 3VA 110V AC 50/60 Hz (valves 70 series i NAMUR)	-	-	In stock	Enquiry
MW-W0215000131	A coil 22 mm D8 BA 3VA 220VAC 50/60 Hz (valves 70 series i NAMUR)	-	-	In stock	Enquiry
MW-W0215000151	A coil 22 mm D8 BA 2W 12V DC (valves 70 series i NAMUR)	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A coil 22 mm for valves series 70 of size 1/8″ and 1/4″, stem Ø8. Insulation class: F155. Voltage tolerance: -10% for +15%. Protection degree: IP65 DIN 40050 with a connector. Compliant with ATEX 94/9 CE, group II, category 3GD.