Is the Collet for MT2 Thermoplastic Hoses, Carbon Steel, BPMT2 Type compatible with reinforced MT2 hoses and high-pressure hydraulic systems?

Collet for MT2 Thermoplastic Hoses, Carbon Steel, BPMT2 Type is designed specifically for securing thermoplastic MT2 hoses and, due to its robust carbon‑steel construction and galvanised finish, offers excellent durability and corrosion resistance for demanding industrial environments. It provides a precise mechanical fit (defined outer D1 and inner D2 diameters) that ensures a stable, leak‑free connection for standard MT2 hose assemblies. However, compatibility with reinforced MT2 hoses and use in high‑pressure hydraulic systems depends on the specific hose reinforcement type, pressure rating and system requirements. The BPMT2 sleeve is suitable where the sleeve’s dimensions match the hose and the hose’s rated pressure does not exceed the sleeve/hose assembly limits. For reinforced hoses or high‑pressure hydraulic applications you must verify: - that the BPMT2 sleeve dimensions (D1/D2) correspond to the reinforced hose outer/inner diameters; - that the sleeve and hose assembly are rated for the system working and peak pressures; - manufacturer recommendations and applicable safety/industry standards. If in doubt, consult the hose and sleeve manufacturers or a qualified engineer to confirm suitability for reinforced hoses and high‑pressure hydraulic service.

Can the Collet for MT2 Thermoplastic Hoses, Carbon Steel, BPMT2 Type be used in environments with chemical exposure or saline corrosion?

Collet for MT2 Thermoplastic Hoses, Carbon Steel, BPMT2 Type: The collet is made of carbon steel with a protective galvanized coating, which gives it good general resistance to wear and many corrosive influences. However, carbon steel—even galvanized—has limits in aggressive chemical environments and prolonged exposure to saline corrosion (saltwater, spray, or high‑chloride atmospheres). For occasional or low‑concentration chemical contact and mild, intermittent saline exposure the BPMT2 sleeve will often perform satisfactorily thanks to the zinc coating. For prolonged immersion, strong acids/alkalis, chlorinated solvents, or continuous marine exposure, the zinc coating can degrade and underlying carbon steel will corrode, so the part is not recommended without additional protection (e.g., specialized coatings, stainless steel alternative, or sacrificial corrosion protection). Assess the specific chemicals, concentrations, temperatures and exposure duration; for critical or continuous corrosive environments choose materials specified for chemical or marine resistance.

Collet for MT2 Thermoplastic Hoses, Carbon Steel, BPMT2 Type

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

The BPMT2 clamping sleeve is a reliable and durable solution designed for secure fastening of thermoplastic hoses type MT2. Manufactured from high‑quality carbon steel and finished with a protective galvanized coating, it ensures excellent resistance to wear, corrosion, and demanding working conditions. With precisely defined dimensions – outer diameter D1 [mm] and inner diameter D2 [mm] – the sleeve guarantees a perfect fit, stable connection, and long service life of the hose assembly. Its robust construction provides enhanced safety and performance, making it an ideal choice for industrial applications where durability and efficiency are essential. The BPMT2 sleeve combines strength with precision, offering a cost‑effective and dependable component that supports optimal functionality of hydraulic and pneumatic systems.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-BPMT2-06	Thermoplastic hose sleeve MT2 3/8" (BP38R2)	10	-	In stock	Enquiry
ZC-BPMT2-08	Thermoplastic hose sleeve MT2 (BP12R2T)	12	-	In stock	Enquiry
ZC-BPMT2-10	Thermoplastic hose sleeve MT2 5/8" (BP58R2)	16	-	In stock	Enquiry
ZC-BPMT2-12	Thermoplastic hose sleeve MT2 3/4" (BP34R1T)	20	-	In stock	Enquiry
ZC-BPMT2-16	Thermoplastic hose sleeve MT2 1" (BP1R1T)	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The BPMT2 clamping sleeve is a reliable and durable solution designed for secure fastening of thermoplastic hoses type MT2. Manufactured from high‑quality carbon steel and finished with a protective galvanized coating, it ensures excellent resistance to wear, corrosion, and demanding working conditions. With precisely defined dimensions – outer diameter D1 [mm] and inner diameter D2 [mm] – the sleeve guarantees a perfect fit, stable connection, and long service life of the hose assembly. Its robust construction provides enhanced safety and performance, making it an ideal choice for industrial applications where durability and efficiency are essential. The BPMT2 sleeve combines strength with precision, offering a cost‑effective and dependable component that supports optimal functionality of hydraulic and pneumatic systems.