Is the DIN 3015 Rubber Double Insert, Type 301 compatible with hoses and pipes of different materials and surface finishes?

Yes — the DIN 3015 Rubber Double Insert, Type 301 is compatible with hoses and pipes of different materials and surface finishes. Its grooved, precisely profiled rubber surface is designed to securely grip a variety of pipe materials (metal, plastic, composite) and accommodate differing outer textures and coatings. The rubber construction cushions against mechanical stress and surface irregularities, reducing vibration and wear while preventing damage to softer finishes. The insert’s robust design and compliance with DIN 3015 ensure reliable fit and long-term stability across common industrial applications and surface treatments, within the specified operating temperature range of −40°C to +80°C. For highly abrasive surfaces, aggressive chemical coatings, or unusually thin-walled or non-cylindrical profiles, verify compatibility with supplier specifications or consider protective liners to ensure optimal performance.

Can the DIN 3015 Rubber Double Insert, Type 301 be used in high-vibration environments without additional damping measures?

DIN 3015 Rubber Double Insert, Type 301 can be used in many high-vibration environments without additional damping measures, but suitability depends on vibration intensity and application specifics. The insert’s durable rubber, grooved surface and robust construction provide good grip, reduce vibration and noise, and protect pipes from wear and mechanical stress, making it effective for typical industrial vibrations encountered in hydraulics, pneumatics, construction and process engineering. Its operating range of −40°C to +80°C ensures performance across common temperature extremes. However, for very high-amplitude or high-frequency vibrations, shock loads, or where regulatory/safety standards demand stricter isolation, additional damping or isolation measures (e.g., specialized anti-vibration mounts, secondary elastomeric pads, or tuned isolators) may be required to prevent fatigue, loosening or resonance. Evaluate based on measured vibration levels, load cycles and installation conditions; consider manufacturer guidance and testing under expected service conditions to confirm whether the insert alone is sufficient.

DIN 3015 Rubber Double Insert, Type 301

All products, Clamps for hydraulic pipes/

Additional information

Material	P – material (plastic)
Standard length [m]	10, 2, 4

The two-part insert designed for DIN 3015 type 301 clamps is manufactured in full compliance with the DIN 3015 standard, ensuring reliable performance and compatibility with a wide range of industrial applications. Crafted from durable rubber, the insert features a precisely profiled, grooved surface that securely accommodates the pipe opening, providing excellent grip and stability even under demanding conditions. Its robust construction effectively reduces vibration and noise, while also protecting pipes from wear and mechanical stress. With an operating temperature range from -40°C to +80°C, the insert guarantees dependable functionality in both low and high temperature environments, making it a versatile solution for diverse industries such as hydraulics, pneumatics, construction, and process engineering. This high-quality component not only enhances the durability of the entire clamp system but also contributes to safer and more efficient installations, offering long-lasting reliability and optimal performance.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-RB301-106,4X	DIN3015 double RB insert for 6.4 mm pipes	-	-	In stock	Enquiry
TC-RB301-106X	DIN3015 double RB insert, 6 mm pipes	-	-	In stock	Enquiry
TC-RB301-108X	DIN3015 double RB insert for 8 mm pipes	-	-	In stock	Enquiry
TC-RB301-109,5X	DIN3015 double RB clamp for 9.5 mm pipes	-	-	In stock	Enquiry
TC-RB301-110X	DIN3015 double RB insert for 10 mm pipes	-	-	In stock	Enquiry
TC-RB301-112X	DIN3015 double RB support for 12 mm pipes	-	-	In stock	Enquiry
TC-RB301-212,7X	DIN3015 double RB clamp for 12.7 mm pipes	-	-	In stock	Enquiry
TC-RB301-213,5X	DIN3015 double RB support for 13.5 mm pipes	-	-	In stock	Enquiry
TC-RB301-214X	DIN3015 double RB support for 14 mm pipes	-	-	In stock	Enquiry
TC-RB301-215X	DIN3015 double RB pipe support 15 mm	-	-	In stock	Enquiry
TC-RB301-216X	DIN3015 double RB pipe support for 16 mm pipes	-	-	In stock	Enquiry
TC-RB301-217,2X	DIN3015 double RB insert for 17.2 mm pipes	-	-	In stock	Enquiry
TC-RB301-218X	DIN3015 double RB support for 18 mm pipes	-	-	In stock	Enquiry
TC-RB301-319X	DIN3015 double RB support for 19 mm pipes	-	-	In stock	Enquiry
TC-RB301-320X	DIN3015 double RB pipe support 20 mm	-	-	In stock	Enquiry
TC-RB301-321,3X	DIN3015 double RB clamp for pipes 21.3 mm	-	-	In stock	Enquiry
TC-RB301-322X	DIN3015 double RB support for 22 mm pipes	-	-	In stock	Enquiry
TC-RB301-325,4X	DIN3015 double RB support for pipes 25.4 mm	-	-	In stock	Enquiry
TC-RB301-325X	DIN3015 double RB support for 25 mm pipes	-	-	In stock	Enquiry
TC-RB301-426,9X	DIN3015 double RB support for pipes 26.9 mm	-	-	In stock	Enquiry
TC-RB301-428X	DIN3015 double RB support for 28 mm pipes	-	-	In stock	Enquiry
TC-RB301-430X	DIN3015 double RB pipe support 30 mm	-	-	In stock	Enquiry
TC-RB301-532X	DIN3015 double RB support for 32 mm pipes	-	-	In stock	Enquiry
TC-RB301-533,7X	DIN3015 double RB clamp for pipes 33.7 mm	-	-	In stock	Enquiry
TC-RB301-535X	DIN3015 double RB insert for 35 mm pipes	-	-	In stock	Enquiry
TC-RB301-538X	DIN3015 double RB pipe support for 38 mm pipes	-	-	In stock	Enquiry
TC-RB301-540X	DIN3015 double RB support for 40 mm pipes	-	-	In stock	Enquiry
TC-RB301-542,4X	DIN3015 double RB clamp for 42.4 mm pipes	-	-	In stock	Enquiry
TC-RB301-542X	DIN3015 double RB support for 42 mm pipes	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The two-part insert designed for DIN 3015 type 301 clamps is manufactured in full compliance with the DIN 3015 standard, ensuring reliable performance and compatibility with a wide range of industrial applications. Crafted from durable rubber, the insert features a precisely profiled, grooved surface that securely accommodates the pipe opening, providing excellent grip and stability even under demanding conditions. Its robust construction effectively reduces vibration and noise, while also protecting pipes from wear and mechanical stress. With an operating temperature range from -40°C to +80°C, the insert guarantees dependable functionality in both low and high temperature environments, making it a versatile solution for diverse industries such as hydraulics, pneumatics, construction, and process engineering. This high-quality component not only enhances the durability of the entire clamp system but also contributes to safer and more efficient installations, offering long-lasting reliability and optimal performance.