Does the JETON Coolant Distributor System with Flow Control, 1/4" support pressures up to 3 bar and temperatures up to +65°C?

Yes. The JETON Coolant Distributor System with Flow Control, 1/4" supports working pressures up to 3 bar and operating temperatures up to +65°C.

Can the JETON Coolant Distributor System with Flow Control, 1/4" be adapted for different coolant types (oil-based, water-based) without affecting performance?

JETON Coolant Distributor System with Flow Control, 1/4" can be adapted for different coolant types (oil-based, water-based) with minimal impact on performance, provided a few considerations are met. The acetal construction offers strong chemical resistance and wear resistance suitable for many common coolants, and the system’s 3 bar pressure rating and up to +65°C operating temperature cover typical industrial fluids. However, compatibility depends on the specific coolant formulation (additives, solvents, viscosity). Oil-based fluids with much higher viscosity may require checking flow rates and valve tuning to maintain even distribution; aggressive solvents or certain additives could over time affect seals or fittings if they fall outside acetal’s resistance range. For water-based coolants, corrosion of any connected metal parts and potential microbial growth should be considered, though the acetal body itself resists water-related degradation. Recommendations: verify chemical compatibility of the specific coolant with acetal and any elastomers/seals in the system, confirm viscosity and temperature remain within the system’s operating limits, and if switching between fluid types, flush and inspect the system to prevent cross-contamination. With these precautions, the JETON Coolant Distributor System with Flow Control, 1/4" will perform reliably with both oil- and water-based coolants.

Configuration directional with regulation flow for coolant, system 1/4″, JETON

Air and water hoses, All products/

Additional information

Material	P – material (plastic)

Configuration directional with regulation flow for discharge coolant – system 1/4″. parts components: A bracket – 1 pcs, elbow – 1 pcs, Tee – 3 pcs, valve connecting – 4 pcs and screws mounting – 3 pcs Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-52410	Distribution system with regulation flow (system 1/4")	-	-	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Configuration directional with regulation flow for discharge coolant – system 1/4″. parts components: A bracket – 1 pcs, elbow – 1 pcs, Tee – 3 pcs, valve connecting – 4 pcs and screws mounting – 3 pcs Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.