Is the DKM 90° Hydraulic End ZMW260, Carbon Steel Connector compatible with standard crimping sleeves for metric hoses?

Yes. The DKM 90° Hydraulic End ZMW260, Carbon Steel Connector is compatible with standard crimping sleeves for metric hoses. The product description specifies an internal metric thread and nut and states it is "intended for crimping with a compatible sleeve matched to the specific hose type," which indicates it is designed to be used with the correct metric crimp sleeves for the hose in question. Ensure you choose a sleeve and crimping die sized for the exact hose series and wall construction to achieve the required metal-to-metal 60° cone seal and leak-free connection.

Can the DKM 90° Hydraulic End ZMW260, Carbon Steel Connector be used with hoses requiring PTFE-lined sleeves or only standard crimping sleeves?

The DKM 90° Hydraulic End ZMW260, Carbon Steel Connector is intended for crimping with a sleeve that is compatible and matched to the specific hose type. It is designed for standard crimping sleeves rather than specialized PTFE-lined sleeves. If your hose requires a PTFE-lined sleeve (commonly used with PTFE/Teflon hoses or hoses with internal liners), you must ensure the sleeve and crimp profile are specifically engineered for that hose construction; the standard ZMW260 fitting itself does not incorporate a PTFE-lined sleeve and will not substitute for a sleeve designed for PTFE-lined hoses. In short: use a sleeve matched to the hose—standard crimping sleeves for standard hoses, and a proper PTFE-compatible sleeve and crimping arrangement if the hose requires PTFE lining.

A fitting hydraulic DKM 90°, type ZMW260, steel carbon

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with a female metric thread with a nut, sealing metal – metal on cone 60°, (DKM), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMW260-12-04	Fitting 90° M12x1.5 female, hose 1/4", 60° cone	6	-	In stock	Enquiry
TI-ZMW260-14-04	Fitting 90° M14x1.5 female, hose 1/4", 60° cone	6	-	In stock	Enquiry
TI-ZMW260-16-05	Fitting 90° M16x1.5 female, hose 5/16", 60° cone	8	-	In stock	Enquiry
TI-ZMW260-16-06	Fitting 90° M16x1.5 female, hose 3/8", 60° cone	10	-	In stock	Enquiry
TI-ZMW260-18-06	Fitting 90° M18x1.5 female, hose 3/8", 60° cone	10	-	In stock	Enquiry
TI-ZMW260-20-06	Fitting 90° M20x1.5 female, hose 3/8", 60° cone	10	-	In stock	Enquiry
TI-ZMW260-20-08	Fitting 90° M20x1.5 female, hose 1/2", 60° cone	12	-	In stock	Enquiry
TI-ZMW260-22-08	Fitting 90° M22x1.5 female, hose 1/2", 60° cone	12	-	In stock	Enquiry
TI-ZMW260-24-08	Fitting 90° M24x1.5 female, hose 1/2", 60° cone	12	-	In stock	Enquiry
TI-ZMW260-26-10	Fitting 90° M26x1.5 female, hose 5/8", 60° cone	16	-	In stock	Enquiry
TI-ZMW260-26-12	Fitting 90° M26x1.5 female, hose 3/4", 60° cone	20	-	In stock	Enquiry
TI-ZMW260-27-10	Fitting 90° M27x1.5 female, hose 5/8", 60° cone	16	-	In stock	Enquiry
TI-ZMW260-28-10	Fitting 90° M28x1.5 female, hose 5/8", 60° cone	16	-	In stock	Enquiry
TI-ZMW260-30-12	Fitting 90° M30x1.5 female, hose 3/4", 60° cone	20	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A fitting hydraulic standard (type Z – of standard “tail” hydraulic for hose), with a female metric thread with a nut, sealing metal – metal on cone 60°, (DKM), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.