Economical steel hose for general use METALICA/F

Additional information

Material

SS – stainless steel

Maximum operating temperature [°C]

700

Minimum operating temperature [°C]

-200

Vacuum resistance

check

Reinforcement

steel braid

Hoses are available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com. Flexible, pliable stainless steel hose with annular corrugations and a single stainless steel braid. Mechanically formed hose with standard corrugation pitch and profile. Designed for conveying liquids and gases under pressure: water, steam, air, hot oil and chemicals. Safety factor 4:1. Suitable for operation under high vacuum. Recommended primarily for static applications under typical operating conditions. Also available on special request without braid or with double braid. Supplied as complete hose assemblies (hoses) with welded fittings, according to the customer’s order. Fittings for steel hoses are shown later in this chapter. Inner layer: corrugated hose made from AISI 316L stainless steel sheet. Reinforcement: single AISI 304 steel braid. Working temperature: from -200°C to +700°C (working pressure depends on temperature). Mechanical configuration of the hose assembly: according to the introduction to this catalogue chapter. Chemical resistance check: AISI 316 steel chemical resistance table (preliminary selection), with resistance and application conditions to be confirmed by Tubes International. Steam applications: see the safety guidelines in the “Steam hoses” chapter. Use of the hose assembly: according to the “Instructions for installation and use of metal pressure hoses” (IU-04, see the introduction to this chapter).

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
TB-METALICA-F-006Hose steel METALICA/F 316L DN6 (1 braid 304)6150In stock0 €
Enquiry
TB-METALICA-F-008Hose steel METALICA/F 316L DN8 (1 braid 304)8110In stock0 €
Enquiry
TB-METALICA-F-010Hose steel METALICA/F 316L DN10 (1 braid 304)1097In stock0 €
Enquiry
TB-METALICA-F-012Hose steel METALICA/F 316L DN12 (1 braid 304)1275In stock0 €
Enquiry
TB-METALICA-F-016Hose steel METALICA/F 316L DN16 (1 braid 304)1660In stock0 €
Enquiry
TB-METALICA-F-020Hose steel METALICA/F 316L DN20 (1 braid 304)2062In stock0 €
Enquiry
TB-METALICA-F-025Hose steel METALICA/F 316L DN25 (1 braid 304)2543In stock0 €
Enquiry
TB-METALICA-F-032Hose steel METALICA/F 316L DN32 (1 braid 304)3246In stock0 €
Enquiry
TB-METALICA-F-040Hose steel METALICA/F 316L DN40 (1 braid 304)4042In stock0 €
Enquiry
TB-METALICA-F-050Hose steel METALICA/F 316L DN50 (1 braid 304)5032In stock0 €
Enquiry
TB-METALICA-F-065Hose steel METALICA/F 316L DN65 (1 braid 304)6535In stock0 €
Enquiry
TB-METALICA-F-080Hose steel METALICA/F 316L DN80 (1 braid 304)8035In stock0 €
Enquiry
TB-METALICA-F-100Hose steel METALICA/F 316L DN100 (1 braid 304)10025In stock0 €
Enquiry
TB-METALICA-F-125Hose steel METALICA/F 316L DN125 (1 braid 304)12510In stock0 €
Enquiry
TB-METALICA-F-150Hose steel METALICA/F 316L DN150 (1 braid 304)15010In stock0 €
Enquiry

Do you need a larger quantity of products or a bespoke quote?

Hoses are available only as complete hose assemblies with fittings crimped by Tubes International. To receive an individual quotation, use the enquiry form in the online shop or download the hose assembly selection form (available as an attachment), complete it and send it to: sklep@tubes-international.com. Flexible, pliable stainless steel hose with annular corrugations and a single stainless steel braid. Mechanically formed hose with standard corrugation pitch and profile. Designed for conveying liquids and gases under pressure: water, steam, air, hot oil and chemicals. Safety factor 4:1. Suitable for operation under high vacuum. Recommended primarily for static applications under typical operating conditions. Also available on special request without braid or with double braid. Supplied as complete hose assemblies (hoses) with welded fittings, according to the customer’s order. Fittings for steel hoses are shown later in this chapter. Inner layer: corrugated hose made from AISI 316L stainless steel sheet. Reinforcement: single AISI 304 steel braid. Working temperature: from -200°C to +700°C (working pressure depends on temperature). Mechanical configuration of the hose assembly: according to the introduction to this catalogue chapter. Chemical resistance check: AISI 316 steel chemical resistance table (preliminary selection), with resistance and application conditions to be confirmed by Tubes International. Steam applications: see the safety guidelines in the “Steam hoses” chapter. Use of the hose assembly: according to the “Instructions for installation and use of metal pressure hoses” (IU-04, see the introduction to this chapter).

Additional information

Material

SS – stainless steel

Maximum operating temperature [°C]

700

Minimum operating temperature [°C]

-200

Vacuum resistance

check

Reinforcement

steel braid

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?