Is the Coolant Extender for 1/4" System JETON compatible with my existing coolant lines and fittings?

Yes — the Coolant Extender for 1/4" System JETON is designed to integrate smoothly into existing 1/4" coolant lines and fittings. Made from durable acetal, it matches typical 1/4" system dimensions and provides a precise, stable connection that supports smooth coolant flow, reduces potential leak points, and simplifies assembly. Its tolerance to temperatures up to +65°C ensures reliable performance under common operating conditions. Note the element is supplied without a clamp, so you should use a compatible clamp or fitting on-site to secure the joint according to your system’s requirements.

Can the Coolant Extender for 1/4" System JETON withstand continuous operation at near its +65°C temperature limit without affecting seal integrity?

Can the Coolant Extender for 1/4" System JETON withstand continuous operation at near its +65°C temperature limit without affecting seal integrity? Short answer: Generally yes, but with cautions. Reasoning: The Coolant Extender for 1/4" System JETON is made from durable acetal and rated to +65°C, meaning the base material maintains dimensional stability and wear resistance up to that temperature. Its precise construction that reduces potential leakage points supports reliable continuous operation close to the specified limit. However, the product is supplied without a clamp, and long-term exposure near the maximum temperature increases stress on any seals, hoses, or mating components (which may be made from different materials with lower heat tolerances). Continuous operation at or repeatedly cycling near +65°C can accelerate seal aging, hardening or swelling depending on seal material and coolant chemistry, potentially compromising integrity over time. Recommendation: If you must run continuously near +65°C, verify that all mating seals, clamps and tubing are rated equal to or above +65°C and chemically compatible with your coolant. Implement periodic inspection and a preventive replacement schedule for seals, and consider reducing operating temperature margin when possible to extend component life.

Extension for coolant, system 1/4″, JETON

Air and water hoses, All products/

Additional information

Element extending for use in systems supply coolant in order to reduction quantity segments – system 1/4″. Bez clamp. Material: acetal. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-82221	Extension L = 94.65 mm (system 1/4")	-	3	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Element extending for use in systems supply coolant in order to reduction quantity segments – system 1/4″. Bez clamp. Material: acetal. Operating temperature: up to +65°C.