Is the Flat Wide Coolant Nozzle, 3/4" System, JETON compatible with standard 3/4" coolant hose fittings?

Flat Wide Coolant Nozzle, 3/4" System, JETON is designed for the 3/4" system, so it is compatible with standard 3/4" coolant hose fittings. Its 3/4" system designation and robust acetal construction ensure easy integration into existing 3/4" coolant hose setups, providing a broad, even flow at pressures up to 1.4 bar and temperatures up to +65°C.

Can the Flat Wide Coolant Nozzle, 3/4" System, JETON withstand continuous operation at temperatures near its +65°C limit?

Yes — the Flat Wide Coolant Nozzle, 3/4" System, JETON can withstand continuous operation near its +65°C limit, but with practical caveats. Why it’s suitable: - Material: made from durable acetal, which provides good dimensional stability and wear resistance under sustained use. - Specified rating: the nozzle is rated to withstand temperatures up to +65°C and continuous operation at pressures up to 1.4 bar, indicating it was designed for sustained service at that upper temperature. Practical considerations: - Operating continuously at or very near the maximum rated temperature accelerates material aging and may reduce service life compared with operating at lower temperatures. If your process frequently reaches or exceeds +65°C spikes, this risks deformation or premature failure. - Combined stresses (chemical exposure, abrasive fluids, high pressure, or mechanical vibration) can further affect longevity at high temperature. - For long-term reliability, allow a safety margin below the +65°C limit when possible, monitor the nozzle for signs of wear or deformation, and schedule more frequent inspections or replacements if you must run continuously near the limit. Conclusion: Suitable for continuous use near +65°C if within rated conditions and without additional adverse stresses; however, to maximize lifespan and reliability, avoid sustained operation at the absolute maximum and implement monitoring/maintenance.

Nozzle flat wide for coolant, system 3/4″, JETON

Air and water hoses, All products/

Additional information

Nozzle flat wide for hoses for coolant JETON – system 3/4″. Available in size 3″. Material: acetal. Working pressure: for 1.4 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-86067	Nozzle flat with a slot 77.3x4.8 mm (system 3/4")	-	1.4	In stock	0 €		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Nozzle flat wide for hoses for coolant JETON – system 3/4″. Available in size 3″. Material: acetal. Working pressure: for 1.4 bar. Operating temperature: up to +65°C.