What condensate drain options are available for the F+L Compressed Air Preparation Unit – NEW DEAL Series and which is best for low-flow systems?

What condensate drain options are available for the F+L Compressed Air Preparation Unit – NEW DEAL Series and which is best for low-flow systems? The F+L Compressed Air Preparation Unit – NEW DEAL Series offers three condensate drain options: manual, semi‑automatic, and fully automatic. The unit’s durable metal tank includes an external condensate level indicator to simplify monitoring and maintenance. For low‑flow systems, the best choice is the fully automatic drain specifically designed to reliably remove small, intermittent condensate without operator intervention—preventing trap‑up and minimizing product loss. If electrical power is not available but some automation is desired, a high‑quality semi‑automatic drain can be acceptable; manual drains are the least suitable for low‑flow applications due to infrequent condensate accumulation and the risk of overflow or neglected draining.

How do I adjust the micrometric oil dosing on the F+L Compressed Air Preparation Unit – NEW DEAL Series to ensure proper lubrication at low flow rates?

To adjust the micrometric oil dosing on the F+L Compressed Air Preparation Unit – NEW DEAL Series for proper lubrication at low flow rates, follow these steps: 1. Locate the micrometric oil dosing control on the unit’s lubricator assembly. 2. Start with the system running at the intended low flow rate and normal supply pressure (≤18 bar; note RA drains limited to 10 bar). 3. Slowly turn the micrometric adjuster in small increments toward a richer setting while observing downstream lubrication effects or test points on the equipment. The micrometric control provides fine, precise changes—make minimal adjustments and wait between steps for the system to stabilize. 4. Verify correct lubrication by checking moving parts for adequate oil film without over-lubrication (no dripping or oil carryover). Use the lowest effective setting that maintains consistent lubrication. 5. Monitor condensate level and drain mode (manual/semi-auto/automatic) to ensure condensate management does not affect dosing. 6. Re-check periodically during operation and after any pressure or flow changes. For best results, perform final verification at actual operating temperature (up to +50°C) and flow conditions corresponding to the unit size (1000–9500 l/min depending on thread size). These steps ensure consistent lubrication accuracy and protect equipment while using the F+L Compressed Air Preparation Unit – NEW DEAL Series at low flow rates.

Assembly preparation compressed air F+L, series NEW DEAL

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	50

Assembly preparation compressed air F + L, intended for series NEW DEAL, consists sie with filter with various stages filtration and lubricator o high stability dosing. basic advantages: 1) metal tank with external preview level condensate. 2) manual/semi-automatic or automatic trigger condensate. 3) micrometric regulation doses lubrication. 4) guaranteed work at low values flow. Size: 1/4″, 3/8″, 1/2″, 3/4″, 1″. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4″ BSP female, 3/8″, 1/2″, 3/4″, 1″. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 1000 l/min – 1/4″, 3500 l/min – 3/8″, 1/2″, 9500 l/min – 3/4″,1″(at an inlet pressure of 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-1233005	Set F+L 1/4 4 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1233006	Set F+L 1/4 20 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1233008	Set F+L 1/4 50 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1233213	Set F+L 1/4 4 SAC N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1233214	Set F+L 1/4 20 SAC N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1233216	Set F+L 1/4 50 SAC N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1333005	Set F+L 3/8 4 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1333006	Set F+L 3/8 20 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1333008	Set F+L 3/8 50 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1333009	Set F+L 3/8 4 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1333010	Set F+L 3/8 20 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1333012	Set F+L 3/8 50 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1333213	Set F+L 3/8" 4 SAC N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1333214	Set F+L 3/8 20 SAC N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1333216	Set F+L 3/8 50 SAC N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1433005	Set F+L 1/2 4 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1433006	Set F+L 1/2 20 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1433008	Set F+L 1/2 50 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1433009	Set F+L 1/2 4 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1433010	Set F+L 1/2 20 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1433012	Set F+L 1/2 50 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1433213	Set F+L 1/2 4 SAC N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1433214	Set F+L 1/2 20 SAC N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1433216	Set F+L 1/2 50 SAC N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1533005	Set F+L 3/4 4 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1533006	Set F+L 3/4 20 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1533008	Set F+L 3/4 50 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1533009	Set F+L 3/4 4 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1533010	Set F+L 3/4 20 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1533012	Set F+L 3/4 50 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1633005	Set F+L 1 4 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1633006	Set F+L 1 20 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1633008	Set F+L 1 50 RMSA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1633009	Set F+L 1" 4 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1633010	Set F+L 1 20 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry
MW-1633012	Set F+L 1 50 RA N TMV (NEW DEAL)	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

Assembly preparation compressed air F + L, intended for series NEW DEAL, consists sie with filter with various stages filtration and lubricator o high stability dosing. basic advantages: 1) metal tank with external preview level condensate. 2) manual/semi-automatic or automatic trigger condensate. 3) micrometric regulation doses lubrication. 4) guaranteed work at low values flow. Size: 1/4″, 3/8″, 1/2″, 3/4″, 1″. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4″ BSP female, 3/8″, 1/2″, 3/4″, 1″. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 1000 l/min – 1/4″, 3500 l/min – 3/8″, 1/2″, 9500 l/min – 3/4″,1″(at an inlet pressure of 6 bar Δp = 1 bar).