Is the PERROT lever connector socket with spun hose end, carbon steel, KMS suitable for sewage and groundwater applications up to 10 bar?

Yes. The PERROT lever connector socket with spun hose end, carbon steel, KMS Format is suitable for sewage and groundwater applications up to 10 bar (note: 8 bar for the 216 mm size). It is manufactured from galvanized carbon steel and uses an SBR sealing system to ensure secure, leak-free connections for groundwater drainage, wastewater management, sewage discharge and related environmental protection projects.

Does the PERROT lever connector socket with spun hose end, carbon steel, KMS require special maintenance to ensure leak-free performance under continuous 8–10 bar operation?

The PERROT lever connector socket with spun hose end, carbon steel, KMS does not require special maintenance beyond standard good practice to ensure leak-free performance under continuous 8–10 bar operation. Key points: - Regular inspection: check seals (SBR), lever mechanism and hose seating for wear, cuts or deformation. - Seal care: SBR seals should be kept clean and replaced if hardened, cracked or deformed. - Fastening checks: ensure clamps/bolts and hose attachment remain tight and correctly positioned. - Corrosion prevention: although galvanized carbon steel is corrosion-resistant, inspect for damage to coating in aggressive environments and repair/replace if necessary. - Operation conditions: avoid exceeding rated pressure (10 bar; 8 bar for 216 mm) and protect against shock pressure or abrasive media that accelerate wear. - Periodic testing: perform pressure tests and leak checks after installation, after maintenance, and at regular intervals during continuous use. Following these routine checks and replacing worn seals or damaged components as needed will maintain leak-free operation under specified pressures.

PERROT lever connector socket with spun hose end, carbon steel, KMS

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	10

The PERROT lever connector socket with flared end for hose is a reliable and versatile solution designed to meet the demanding requirements of modern agriculture, horticulture, industry, and construction. Manufactured from durable galvanized carbon steel and equipped with an SBR sealing system, it ensures secure and leak-free connections even under intensive use. With a working pressure capacity of up to 10 bar (8 bar for the 216 mm size), this connector is perfectly suited for applications such as groundwater drainage, wastewater management, sewage discharge, and environmental protection projects. Its robust design guarantees long-lasting performance in road and tunnel construction, as well as in treatment plants and other challenging environments. Easy to install and highly resistant to wear, the PERROT lever connector socket provides efficiency, safety, and reliability, making it an essential component for professionals seeking durable and cost-effective hose connection solutions.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HC-KMS-050-050	KMS socket 50 mm with flared end for 50 mm hose, galvanized steel.	50	10	In stock	Enquiry
HC-KMS-070-070	KMS socket 70 mm with flared end for 70 mm hose, galvanized steel.	70	10	In stock	Enquiry
HC-KMS-089-075	KMS socket 89 mm with flared end for 75 mm hose, galvanized steel.	75	10	In stock	Enquiry
HC-KMS-089-080	KMS socket 89 mm with flared end for 80 mm hose, galvanized steel.	80	10	In stock	Enquiry
HC-KMS-089-090	KMS socket 89 mm with flared end for 90 mm hose, galvanized steel.	90	10	In stock	Enquiry
HC-KMS-108-075	KMS socket 108 mm with flared end for 75 mm hose, galvanized steel.	75	10	In stock	Enquiry
HC-KMS-108-100	KMS socket 108 mm with flared end for 100 mm hose, galvanized steel.	100	10	In stock	Enquiry
HC-KMS-108-110	KMS socket 108 mm with flared end for 110 mm hose, galvanized steel.	110	10	In stock	Enquiry
HC-KMS-133-125	KMS socket 133 mm with flared end for 125 mm hose, galvanized steel.	125	10	In stock	Enquiry
HC-KMS-159-150	KMS socket 159 mm with flared end for 150 mm hose, galvanized steel.	150	10	In stock	Enquiry
HC-KMS-216-200	KMS socket 216 mm with flared end for 200 mm hose, galvanized steel.	200	8	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

The PERROT lever connector socket with flared end for hose is a reliable and versatile solution designed to meet the demanding requirements of modern agriculture, horticulture, industry, and construction. Manufactured from durable galvanized carbon steel and equipped with an SBR sealing system, it ensures secure and leak-free connections even under intensive use. With a working pressure capacity of up to 10 bar (8 bar for the 216 mm size), this connector is perfectly suited for applications such as groundwater drainage, wastewater management, sewage discharge, and environmental protection projects. Its robust design guarantees long-lasting performance in road and tunnel construction, as well as in treatment plants and other challenging environments. Easy to install and highly resistant to wear, the PERROT lever connector socket provides efficiency, safety, and reliability, making it an essential component for professionals seeking durable and cost-effective hose connection solutions.