Is the DIN 3015 Heavy Duty Clamp, Polyamide, Type 201 suitable for marine environments and saltwater exposure?

Yes. The DIN 3015 Heavy Duty Clamp, Polyamide, Type 201 is suitable for marine environments and saltwater exposure. It is explicitly noted as designed for marine applications and combines a self-extinguishing polyamide body with galvanized steel screws and plates and a carbon steel base, providing strong mechanical and environmental resistance. Galvanization offers corrosion protection for the metal fasteners and plates, and the polyamide clamp body resists moisture and chemical exposure common in marine settings. For maximal longevity in aggressive saltwater or highly corrosive offshore conditions, consider additional corrosion-resistant options or protective treatments and consult TUBES INTERNATIONAL® specialists to confirm the optimal material/configuration for your specific environment and maintenance regime.

Does the DIN 3015 Heavy Duty Clamp, Polyamide, Type 201 require any special anti-corrosion treatment when used in corrosive marine atmospheres over long periods?

DIN 3015 Heavy Duty Clamp, Polyamide, Type 201 Format is supplied with a carbon steel base and galvanized steel screws/plates, and a polyamide (self‑extinguishing) saddle. For general industrial and many marine uses this combination provides good mechanical strength and baseline corrosion resistance. However, in continuously corrosive marine atmospheres (salt spray, splashing seawater, high humidity) long‑term exposure will promote corrosion of the carbon steel base and even the galvanized hardware over time. Therefore, for prolonged service in aggressive marine environments you should consider additional anti‑corrosion measures: specification of stainless steel (e.g., A4/316) fasteners and plates and/or a corrosion‑resistant base (stainless or suitably coated carbon steel), or application of heavy‑duty protective coatings (marine-grade paint, epoxy or hot‑dip galvanizing of the base if not already treated). Periodic inspection and maintenance (cleaning, re‑coating or replacing corroded parts) are also recommended. Consult TUBES INTERNATIONAL® specialists to select the appropriate material/finish and any required treatments for your specific marine exposure and service life expectations.

A clamp DIN 3015 heavy, polyamide, type 201

All products, Clamps for hydraulic pipes/

Additional information

Material	P – material (plastic)

A clamp DIN 3015 heavy type 201 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +180°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-PA201-106	Clamp DIN3015 heavy PA for a 6 mm pipe	-	-	In stock	Enquiry
TC-PA201-106,4	Clamp DIN3015 heavy PA for a 6.4 mm pipe	-	-	In stock	Enquiry
TC-PA201-108	Clamp DIN3015 heavy PA for a 8 mm pipe	-	-	In stock	Enquiry
TC-PA201-109,5	Clamp DIN3015 heavy PA for a 9.5 mm pipe	-	-	In stock	Enquiry
TC-PA201-110	Clamp DIN3015 heavy PA for a 10 mm pipe	-	-	In stock	Enquiry
TC-PA201-112	Clamp DIN3015 heavy PA for a 12 mm pipe	-	-	In stock	Enquiry
TC-PA201-112,7	Clamp DIN3015 heavy PA for a 12.7 mm pipe	-	-	In stock	Enquiry
TC-PA201-113,5	Clamp DIN3015 heavy PA for a 13.5 mm pipe	-	-	In stock	Enquiry
TC-PA201-114	Clamp DIN3015 heavy PA for a 14 mm pipe	-	-	In stock	Enquiry
TC-PA201-115	Clamp DIN3015 heavy PA for a 15 mm pipe	-	-	In stock	Enquiry
TC-PA201-116	Clamp DIN3015 heavy PA for a 16 mm pipe	-	-	In stock	Enquiry
TC-PA201-117,2	Clamp DIN3015 heavy PA for a 17.2 mm pipe	-	-	In stock	Enquiry
TC-PA201-118	Clamp DIN3015 heavy PA for a 18 mm pipe	-	-	In stock	Enquiry
TC-PA201-219	Clamp DIN3015 heavy PA for a 19 mm pipe	-	-	In stock	Enquiry
TC-PA201-220	Clamp DIN3015 heavy PA for a 20 mm pipe	-	-	In stock	Enquiry
TC-PA201-221,3	Clamp DIN3015 heavy PA for a 21.3 mm pipe	-	-	In stock	Enquiry
TC-PA201-222	Clamp DIN3015 heavy PA for a 22 mm pipe	-	-	In stock	Enquiry
TC-PA201-225	Clamp DIN3015 heavy PA for a 25 mm pipe	-	-	In stock	Enquiry
TC-PA201-225,4	Clamp DIN3015 heavy PA for a 25.4 mm pipe	-	-	In stock	Enquiry
TC-PA201-226,9	Clamp DIN3015 heavy PA for a 26.9 mm pipe	-	-	In stock	Enquiry
TC-PA201-228	Clamp DIN3015 heavy PA for a 28 mm pipe	-	-	In stock	Enquiry
TC-PA201-230	Clamp DIN3015 heavy PA for a 30 mm pipe	-	-	In stock	Enquiry
TC-PA201-330	Clamp DIN3015 heavy PA for a 30 mm pipe	-	-	In stock	Enquiry
TC-PA201-332	Clamp DIN3015 heavy PA for a 32 mm pipe	-	-	In stock	Enquiry
TC-PA201-333,7	Clamp DIN3015 heavy PA for a 33.7 mm pipe	-	-	In stock	Enquiry
TC-PA201-335	Clamp DIN3015 heavy PA for a 35 mm pipe	-	-	In stock	Enquiry
TC-PA201-338	Clamp DIN3015 heavy PA for a 38 mm pipe	-	-	In stock	Enquiry
TC-PA201-340	Clamp DIN3015 heavy PA for a 40 mm pipe	-	-	In stock	Enquiry
TC-PA201-342	Clamp DIN3015 heavy PA for a 42 mm pipe	-	-	In stock	Enquiry
TC-PA201-342,4	Clamp DIN3015 heavy PA for a 42.4 mm pipe	-	-	In stock	Enquiry
TC-PA201-438	Clamp DIN3015 heavy PA for a 38 mm pipe	-	-	In stock	Enquiry
TC-PA201-442	Clamp DIN3015 heavy PA for a 42 mm pipe	-	-	In stock	Enquiry
TC-PA201-442,4	Clamp DIN3015 heavy PA for a 42.4 mm pipe	-	-	In stock	Enquiry
TC-PA201-444,5	Clamp DIN3015 heavy PA for a 44.5 mm pipe	-	-	In stock	Enquiry
TC-PA201-448,3	Clamp DIN3015 heavy PA for a 48.3 mm pipe	-	-	In stock	Enquiry
TC-PA201-450	Clamp DIN3015 heavy PA for a 50 mm pipe	-	-	In stock	Enquiry
TC-PA201-450,8	Clamp DIN3015 heavy PA for a 50.8 mm pipe	-	-	In stock	Enquiry
TC-PA201-455	Clamp DIN3015 heavy PA for a 55 mm pipe	-	-	In stock	Enquiry
TC-PA201-457	Clamp DIN3015 heavy PA for a 57 mm pipe	-	-	In stock	Enquiry
TC-PA201-460,3	Clamp DIN3015 heavy PA for a 60.3 mm pipe	-	-	In stock	Enquiry
TC-PA201-463,5	Clamp DIN3015 heavy PA for a 63.5 mm pipe	-	-	In stock	Enquiry
TC-PA201-465	Clamp DIN3015 heavy PA for a 65 mm pipe	-	-	In stock	Enquiry
TC-PA201-470	Clamp DIN3015 heavy PA for a 70 mm pipe	-	-	In stock	Enquiry
TC-PA201-565	Clamp DIN3015 heavy PA for a 65 mm pipe	-	-	In stock	Enquiry
TC-PA201-570	Clamp DIN3015 heavy PA for a 70 mm pipe	-	-	In stock	Enquiry
TC-PA201-575	Clamp DIN3015 heavy PA for a 75 mm pipe	-	-	In stock	Enquiry
TC-PA201-576,1	Clamp DIN3015 heavy PA for a 76.1 mm pipe	-	-	In stock	Enquiry
TC-PA201-580	Clamp DIN3015 heavy PA for a 80 mm pipe	-	-	In stock	Enquiry
TC-PA201-582,5	Clamp DIN3015 heavy PA for a 82.5 mm pipe	-	-	In stock	Enquiry
TC-PA201-588,9	Clamp DIN3015 heavy PA for a 88.9 mm pipe	-	-	In stock	Enquiry
TC-PA201-6100	Clamp DIN3015 heavy PA for a 100 mm pipe	-	-	In stock	Enquiry
TC-PA201-6101,6	Clamp DIN3015 heavy PA for a 101.6 mm pipe	-	-	In stock	Enquiry
TC-PA201-6108	Clamp DIN3015 heavy PA for a 108 mm pipe	-	-	In stock	Enquiry
TC-PA201-6114,3	Clamp DIN3015 heavy PA for a 114.3 mm pipe	-	-	In stock	Enquiry
TC-PA201-6127	Clamp DIN3015 heavy PA for a 127 mm pipe	-	-	In stock	Enquiry
TC-PA201-6133	Clamp DIN3015 heavy PA for a 133 mm pipe	-	-	In stock	Enquiry
TC-PA201-688,9	Clamp DIN3015 heavy PA for a 88.9 mm pipe	-	-	In stock	Enquiry
TC-PA201-7133	Clamp DIN3015 heavy PA for a 133 mm pipe	-	-	In stock	Enquiry
TC-PA201-7139,7	Clamp DIN3015 heavy PA for a 139.7 mm pipe	-	-	In stock	Enquiry
TC-PA201-7152,4	Clamp DIN3015 heavy PA for a 152.4 mm pipe	-	-	In stock	Enquiry
TC-PA201-7165	Clamp DIN3015 heavy PA for a 165 mm pipe	-	-	In stock	Enquiry
TC-PA201-7168,3	Clamp DIN3015 heavy PA for a 168.3 mm pipe	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +91 8 925 918 796 or email us: chennai@tubes-international.com

SEND ENQUIRY

A clamp DIN 3015 heavy type 201 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +180°C.